IMPORTANT SAFETYINSTRUCTION
Remote Control
IMPORTANT SAFETY INSTRUCTION
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding – type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third ground-
ing prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into your
outlet, consult an electrician for replace-
ment of the obsolete outlet.
10. Protect the power cord from being walked
ZOOM
ANGLE
Accesses the Zoom feature (if available).
Selects the camera angle (if available).
To reduce risk of electrical shock, do not
on or pinched particularly at plugs, conven-
ience receptacles. and the point where they
exit from the apparatus.
WARNING
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
remove cover or back (no user serviceable
parts inside). Refer servicing to qualified
personnel.
OPEN•CLOSE Opens and closes the disc tray.
ON•OFF
Turns the player on and off.
11. Only use attachments/accessories spec-
ified by the manufacturer.
12. Use only with a cart, stand, tri-
pod, bracket, or table specified
user manual
PROGRAM
RANDOM
REPEAT A - B
HDMI
Accesses the Program playback mode.
Starts the Random playback mode.
Accesses the Repeat playback mode.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates
important instructions ac-
companying the product.
by the manufacturer, or sold with
the apparatus. When a cart is
Toggles through the resolutions available for the
HDMI output.
DRC286
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
FCC INFORMATION
REVERSE
Searches back through the disc.
Searches forward through the disc.
Advances to the next/preceding chapter or track.
Freezes frame, frame advance, and slow motion.
Starts playing a disc.
Portable Cart
Warning
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
FORWARD
SKIP
,
13. Unplug this apparatus during lightning stoms
or when unused for long periods of time.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in anyway, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed
to rain or moisture, does not operate nonnally,
PAUSE
PLAY
STOP
CLEAR
Stops disc playback.
Clears inputs or operations.
DISC MENU
Accesses the disc’s menu (if available).
Navigates through the menus.
Selects the item highlighted in the menu.
Previews contents of disc.
,
,
,
•
•
•
Reorient or relocate the receiving antenna.
OK
Increase the separation between the equipment and receiver.
Connect this equipment into an outlet on a circuit different from that to which the receiver
is connected.
PREVIEW
SET UP
Accesses and exits the General setup main menu.
Number entry.
0 – 9
•
Consult the dealer or an experienced radio/TV technician for help.
DISPLAY
AUDIO
Shows playback status.
CAUTION: FCC Regulations state tha tunauthorized changes or modifi cations to this equip-
ment may void the user’s authority to operate it.
Selects the audio language.
SUBTITLE
DVD/USB
CD>>mp3
TITLE MENU
Turns the subtitle on and off.
This class B digital apparatus meets all requirements of the Canadian Interference–Causing
Equipment Regulations.
Selects disc or USB playback.
Enters CD ripping mode.
The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom
panel of unit.
Accesses the title of the disc and turns Playback
Control (PBC) on and off (VCDs only).
Refer to the identifi cation/rating label located on the back panel of your product for its
proper operating voltage.
Install Batteries in the remote
CAUTION: This product utilizes a laser. Use of controls or adjustments or
CLASS 1
•
Insert two AA batteries, matching the polarity
inside the battery compartment.
performance of procedures other than those specified herein may result
LASER
in hazardous radiation exposure. Do not open covers and do not repair
PRODUCT
This DVD player is designed and manufactured to respond to the Region Management
Information. If the Region number of a DVD disc does not correspond to the Region
number of this DVD player, this DVD player cannot play the disc. The Region number for
this DVD player is Region No 1.
yourself. Refer servicing to qualified personel.
Notes:
•
Do not mix different types of batteries or new
IMPORTANT: The power cord can be unplugged to turn off the main power to the unit. It
should also be easily accessible in an emergency.
and old batteries.
This product incorporates copyright protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macro-
vision Corporation, and is intended for home and other limited consumer uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
•
•
Do not use rechargeable batteries.
•
Leave sufficient space around the appliance to allow adequate ventilation: 10cm on either
side and at the back, as well as 7cm above it are ideal.
Dispose of batteries in the proper manner,
according to federal, state, and local regulations.
•
Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
This DVD player has
earned the ENERGY STAR.
Windows Media and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
It is important to read this instruction prior to using your new product for the first time.
Playing Discs
Basic Playback Operations
Basic Connection
Advanced Playback Features
Compatible Discs
Other Connection Options
Turn on the DVD Player
Audio (DVD, VCD and CD)
Some discs have several audio tracks used for different languages or different audio formats.
To change the language or audio format during play, press the AUDIO button one or more times
to select one of the available audio formats or languages.
This DVD Player is capable of playing the following types of discs: DVDs,
Audio CDs, Video CDs, and CDs with mp3 files, WMA files (Windows
Media Audio), and JPEG files on them. Before you put a disc in the player,
make sure it is compatible. You can’t play the following types of discs:
Laserdiscs, CD-I, CD-ROM (computer-only discs), DVD-ROM, or discs re-
corded using other broadcast standards (i.e., PAL or SECAM); CD-G discs.
Note: Some discs may not be compatible due to laser pickup, recording
formats, and software used. Some technologies and methods used for
mp3 file recording on CD-Rs can prevent optimal playback of these files
on your DVD player by degrading the sound quality and/or the ability of
the player to read the file.
1. Plug the power cord into the outlet once the DVD player is connected to your TV.
2. Turn on the TV and tune to its Video Input Channel, if necessary.
HDMI (High-Definition Multimedia Interface)
HDMI
The HDMI jack provides optimum picture quality. This jack gives
you an uncompressed digital interface that carries both video
and audio data by way of an integrated mini-plug cable.
Note: Make sure you set the HDMI Setup option in the menu
system to the resolution setting that most closely matches your TV.
3. Press the ON/STANDBY on the DVD player or the ON•OFF button on the remote control
to turn it on.
Note: This option is only available if the disc offers a number of languages or formats.
4. Press the OPEN/CLOSE button on the front of the player or remote control to open the
disc tray.
Display
HDMI Cable
The Display appears across the top of the screen when you press the DISPLAY button on the
remote while playing a disc. Press the DISPLAY button repeatedly to scroll through playback
information.
5. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have
content on both sides, so you can place the disc with either side up.)
COMPONENT VIDEO OUT (Y, Pb, Pr) Jacks
Y
PR
The Y, Pb, Pr jacks provide excellent picture quality because the
video signal is separated into three parts. To ensure maximum
picture quality, use three video-grade cables (yellow) for the con-
nection. You can also buy bundled component video cables that
are color-coded to match the Y, Pb, Pr jacks (green, blue, red).
Note: Remember to connect the audio cables because the
component cable carries only the picture signal, not the sound.
6. Press OPEN/CLOSE again to close the disc tray. Play starts automatically. If a menu app-
ears, one of its options can be selected to start playing the disc. Highlight it and press OK.
P
B
Preview
The Preview feature enables you to view contents of the disc on the screen. To preview the disc:
1. Press the PREVIEW button during playback.
7. Press STOP to stop playback. The player remembers the point where disc was stopped.
If you press PLAY again, playback resumes from this point. To stop playback completely
or to start again from the beginning, press STOP twice. If the player is left in STOP mode
for more than five minutes without any user interaction, the screen saver is activated.
Front Panel Controls
2. Highlight the preview selection.
•
Digest: shows all the available contents. Input the number of the item you want to play
using the numeric buttons and press OK to confirm.
Component Video Cables
DIGITAL OUT
1
2
3
4
•
Interval: shows all tracks in 10-minute intervals. Input the number corresponding to the
interval where you want to start playback from and press OK to confirm.
Picture Scan – When you’re playing a disc, each time you press FORWARD or REVERSE,
your DVD player scans the disc faster until you reach the fastest scan
speed. To resume normal playback, press PLAY or continue to press
FORWARD or REVERSE.
DIGITALOUT COAXIAL/OPTICAL (Audio)
Use one of these jacks to connect your DVD player to a Dolby
Digital receiver or decoder. Some receivers have either the
Coaxial or Optical type of Digital Audio Input jack and some have
both. Under most conditions, coaxial and optical connections
work equally well–the only difference is the type of cable you
connect to the jack.
3. Select NEXT to view the next page, MENU to return to the Select Disc Type menu, or START
to begin playback.
1. ON/STANDBY – Switches the appliance on and off.
3. PLAY – Starts playing a disc.
COAXIAL
OPTICAL
Introscan (Audio CDs only)
Use this feature to preview the first few seconds of each track on a CD. Press the PREVIEW
button to start the Introscan. Press PLAY to continue playing the current track.
Freeze Frame and Frame Advance – While a disc is playing, press PAUSE to freeze the pic-
ture. To advance one frame at a time, press PAUSE
2. OPEN/CLOSE – Opens and closes the disc tray.
4. STOP – Stops disc playback.
repeatedly. To resume normal playback, press PLAY.
Note: If the DVD player is connected to a DTS receiver through
DIGITAL OUT and DTS track is selcted, there will be no sound.
Basic Connection
Coaxial Cable
Optical Cable
Note: After approximately five minutes in PAUSE with no user interaction, the player goes
Playback Control (PBC)
into screen saver mode.
The Playback Control feature is available only on Video CDs. Press the TITLE MENU button
to turn the PBC feature on and off. The Playback Control feature supports the menus of the
VCD format similar to a DVD menu.
TV
DVD + TV
L
R
VIDEO
AUDIO
Connecting TV with DVI input
INPUT
Slow Motion – While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each
time you press reverse or forward, the slow motion will get even slower until
you reach the slowest speed). To resume normal playback, press PLAY.
Please get a HDMI to DVI cable (not supplied)
to connect your DVD player to a TV or monitor
with a DVI input jack.
CD Ripping
Red
1. Insert the CD disc into the disc compartment for loading, and then press the STOP button
to stop the disc playback.
2. Insert the USB device into the USB terminal, press the CD>>mp3 button to enter the CD
ripping mode.
White
Yellow
Chapter/Track Advance – While a disc is playing, you can skip forward or backward a
chapter or track at a time by pressing the SKIP
and SKIP
.
IMPORTANT:
DVD Player
Note: Use the numeric buttons to directly access a specific track or chapter number. For
single digit tracks or chapters, enter a 0 before single digit numbers; for example,
enter 0, then 3 for chapter/track 3.
Note:
Since DVI connections do not carry audio,
you will need to connect the DVD Player’s
AUDIO OUT jacks to your TV’s audio input
jacks to hear the audio from the DVD Player.
3. Press the OK button to confirm the USB connection and enter the rip menu.
Whenever you are connecting your
system cables, turn off the power
and make certain that the power cord
has been removed from the wall outlet.
4. Press the number buttons to enter your desired recording CD track number.
5. Press the OK button to start the CD ripping. The % ripping indicator bar will appear on the
screen to indicate the recording progress of the CD track to the USB device.
6. Press the OK button again after 100% ripping is reached, and then press the DVD/USB
button to select the USB mode. The USB files menu will display on the screen.
Zoom – While a disc is playing, press ZOOM (the player zooms in on the image). Each time
you press ZOOM, the picture is magnified even more (until you get to the maximum
zoom level). To see other parts of the picture when you’ve zoomed in on the image,
You can also use one of the digital audio
output jacks to connect the DVD Player to
an audio receiver with digital input jacks. See
your DVD Player’s User Manual for more
information.
1. Connect the audio cables to the AUDIO OUT L and R jacks on the back of your DVD
player and to the corresponding AUDIO INPUT jacks on your TV.
try pressing the
,
,
and
buttons to go in corresponding directions. This
7. Press the
or
button to select your desired track and press OK to play.
2. Connect the video Cable.
2a. Basic connection – Connect the video cable to the VIDEO OUT jack on the back of
the your DVD player, and to the VIDEO INPUT jack on your TV. - OR -
feature is called pan and scan.
Notes:
Note: Under Zoom function for JPEG file, press ZOOM button goes to Zoom 1x mode, then
press REVERSE or FORWARD button repeatedly to select the zoom steps. Press
ZOOM to quit the zoom mode.
•
A USB cable (sold separately) may be used when connecting your USB device with the
unit. The quality of the USB cable may affect the performance of the file transfer.
2b. S-Video (not shown) – If your TV has an S-Video jack, connect the S-Video cable
(not provided) to the S-VIDEO on the DVD to the S-VIDEO of your TV.
Note: If your TV doesn’t have Audio and Video Input Jacks and only has an RF jack, you
need to connect an RF modulator (not provided).
•
The mp3 player connected to the unit must be in the MSC (Mass Storage Class) mode for
transferring the CD content to your mp3 player. If your mp3 player is in the MSC mode, it will
show as a drive letter instead of the name of the mp3 player when connected to a computer.
HDMI and High-Definition Multimedia Interlace are trademarks or registered trademarks of HDMI Licensing
LLC.
|