Radio Shack Automobile Accessories 63 235 User Guide

Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the  
users authority to operate the equipment.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Please read this user’s guide before using your new tire  
gauge.  
2Measure Tire Pressure  
Air pressure  
release pin  
Connect to the tire valve if  
the pressure is too high.  
Air pressure  
measurement head  
1. Unscrew the valve cap from the tire.  
DIGITAL TIRE GAUGE  
Connect to the tire valve  
and hold in place for a few  
seconds to measure the  
tire pressure.  
2. Press CHECK. 0.0 PSI shows.  
Package contents  
LIGHT  
b a c k l i t d i s p l a y  
3. Repeatedly press CHECK to change the measurement  
Press once: the lights are on.  
Limited Warranty  
unit to be BAR, KG/cm2, or KPa.  
Tire Gauge  
Users Guide  
Quick Start  
Press twice: the lights flash.  
Ignition L.P. warrants this product against defects in materials and workmanship under normal use by the  
original purchaser for ninety (90) days after the date of purchase. IGNITION L.P. MAKES NO OTHER  
EXPRESS WARRANTIES.  
Press the third time: lights off.  
4. Connect the tire gauge to the tire valve and hold in place  
for a few seconds to read the measurement.  
This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to  
follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods  
or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who  
are not a Ignition L.P. Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary  
wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product  
removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the  
original purchaser.  
Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof  
of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by  
law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a  
comparable product; or (c) refund the purchase price. All replaced parts and products, and products on  
which a refund is made, become the property of Ignition L.P. New or reconditioned parts and products  
may be used in the performance of warranty service. Repaired or replaced parts and products are  
warranted for the remainder of the original warranty period. You will be charged for repair or replacement  
of the product made after the expiration of the warranty period.  
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS  
LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING  
THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY  
OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED  
WARRANTY PERIOD.  
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO  
THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY  
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE  
OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT  
NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF  
TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Features  
Swivel work/emergency lights  
Selectable units  
Backlit display  
The display turns off after 20 seconds if no further operation  
is made.  
CHECK  
Press to turn on your  
tire gauge. Press once  
more to change units.  
3 Measure Tire Tread  
1. Slide the switch at the back of the tire gauge to extend  
the tire tread measurement guide and insert it between tire  
treads.  
Tire tread gauge  
Swivel work lights/  
emergency lights  
270 degree swivel LED  
lights.  
1Install Batteries  
Tire tread  
indicator  
1. Unscrew to remove the battery  
compartment cover.  
Depth  
Indicator  
Status  
2. Install two AAA batteries (not  
included), matching the polarity  
symbols (+ and –) marked inside.  
> 6mm  
Green  
Safe.  
Tire tread measurement guide  
To measure tire tread.  
2-6mm  
< 2mm  
Amber  
Red  
Alert. Check tires.  
3. Replace the cover and secure it  
Dangerous. Replace tires.  
with the screw.  
2. After measurement, slide the guide in.  
b Battery Notes:  
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation  
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from State to  
State. You may contact Ignition L.P. at:  
Dispose of batteries promptly and  
properly. Do not burn or bury them.  
FCC Information  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201  
02/09  
Use only fresh batteries of the  
required size and type.  
Built-in Magnet  
Place the tire gauge on  
any metallic surface.  
For product support, call 1-866-315-0426  
Slide to extend  
the tire tread  
measurement  
guide  
Do not mix old and new batteries, different types of batteries  
(alkaline, or rechargeable), or rechargeable batteries of different  
capacities.  
Protect the environment by recycling used electronics. Go  
to E-CyclingCentral.com to find an electronic recycling  
center near you.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
63-235  
User’s Guide  
If you do not plan to use the tire gauge for an extended time,  
remove the battery. Batteries can leak chemicals that can  
damage electronic parts.  
Printed  
in China  
07A09  
63-235  
© 2009. Ignition L.P. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games G73028 User Guide
Radio Shack Radio DX 398 User Guide
ResMed Oxygen Equipment VPAP ST User Guide
Rheem Water Heater HE45 160 User Guide
Ricoh Power Supply RH5RH12B User Guide
Roberts Gorden Gas Heater HP 120 V 1 User Guide
Royal Vacuums Vacuum Cleaner RY3050 User Guide
Salton Hot Beverage Maker MEK15 User Guide
Samsung Oven BF62CCBST User Guide
Sanyo Digital Camera VCC 6975P User Guide