Radio Shack Universal Remote 15 2133 User Guide
CAT. NO 15-2133  
OWNER’S MANUAL  
Please read before using this equipment.  
6-IN-ONE  
TOUCHSCREEN REMOTE  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
SETUP CODES FOR AUDIO AMPLIFIERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
AMPLIFICADORES DE AUDIO) . . . . . . . . . . . . .46  
SETUP CODES FOR AUDIO RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE AUDIO) . . . . . . . . . . . . . . .46-48  
SETUP CODES FOR CABLE CONVERTERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
CONVERTIDORES DE CABLE) . . . . . . . . . . . . .48  
SETUP CODES FOR CD PLAYERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
REPRODUCTORES DE CDS) . . . . . . . . . . . . . . . .49  
SETUP CODES FOR DVD PLAYERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
REPRODUCTORES DVD) . . . . . . . . . . . . . . .49-50  
SETUP CODES FOR HOME AUTOMATION  
(CÓDIGOS DE CONFIGURACIÓN PARA LA  
AUTOMATIZACIÓN DEL HOGAR) . . . . . . . . . .50  
SETUP CODES FOR HOME-THEATER-IN-A-BOX  
DEVICES (CÓDIGOS DE CONFIGURACIÓN  
PARA DISPOSITIVOS HOME-THEATER-  
IN-A-BOX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
SETUP CODES FOR SATELLITE RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE SATÉLITE) . . . . . . . . . . . . . . .51  
SETUP CODES FOR TVS (CÓDIGOS DE  
CONFIGURACIÓN PARA TELEVISORES) . .52-55  
SETUP CODES FOR TV/VCR COMBOS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
APARATOS COMBINADOS  
TELEVISOR/VIDEOGRABADORA) . . . . . . .55-56  
SETUP CODES FOR VCRS (CÓDIGOS  
DE CONFIGURACIÓN PARA  
VIDEOGRABADORAS) . . . . . . . . . . . . . . . . .56-59  
SETUP CODES FOR TV/DVD COMBOS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
APARATOS COMBINADOS TELEVISOR/  
REPRODUCTORES DVD) . . . . . . . . . . . . . . . . . .60  
SETUP CODES FOR PVRS  
(CÓDIGOS DE CONFIGURACIÓN PARA VIDEO  
GRABADORA PERSONAL) . . . . . . . . . . . . . . . . .60  
SETUP CODES FOR XBOX (CÓDIGOS DE  
CONFIGURACIÓN PARA XBOX) . . . . . . . . . . . .60  
SETUP CODES FOR PLAYSTATION2  
(CÓDIGOS DE CONFIGURACIÓN PARA  
PLAYSTATION2) . . . . . . . . . . . . . . . . . . . . . . . . .60  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
INTRODUCTION  
Thank you for purchasing a RadioShack 6-in-One  
Remote powered by Kameleon™.Your remote is  
the next generation in remote control technology.  
It only displays the active keys for each device, so  
each screen is simple and unique. This easy to use  
display interface also features animated icons to  
identify the selected device.  
Yo ur remote is designed to operate up to six home  
entertainment devices, including TV, VCR, cable  
converter, satellite receiver, CD player, audio  
receiver, amplifier, home-theater-in-a-box, DVD  
player, and even some home automation devices  
(e.g., remote controlled lights). Preprogrammed  
with the most commonly used commands for  
your home entertainment device, your 6-in-One is  
also packed with advanced features such as:  
• Macros – for instant activation of favorite key  
sequences  
• Learning – to capture and reproduce unique  
functions from your devices’ original remote  
controls  
• Code Search and Verification – helps you  
quickly set up the remote control to operate  
your devices  
• Channel Scan and Favorite Channel Scan –  
lets you “channel surf ” all available and favorite  
channels  
• Volume Lock – to assign volume controls to  
individual devices or to one global device  
• Dedicated Menu/Guide Keys – for instant  
access to cable and satellite program guides and  
menus  
• Searchable Code Library – contains world’s  
largest and most efficient group of infrared  
remote control codes for virtually every current  
brand and make  
• Picture-in-Picture – supports TVs equipped  
with Picture-in-Picture functionality  
After installing four (4) new AAA alkaline batter-  
ies (not supplied, available at RadioShack), you  
can immediately use the 6-in-One remote to con-  
trol an RCA TV,VCR, DVD and satellite receiver,  
and Pioneer CD and audio devices.  
To cont rol ot her brands and devices, see “Setting  
up the Remote” on page 10.  
4 Introduction  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
QUICK START GUIDE  
Para instrucciones en espanol, vea la pagina 14.  
INSTALLING BATTERIES  
Yo ur remote requires four AAA batteries (not  
supplied) for power. Batteries are available at  
your local RadioShack store or online at  
www.radioshack.com.  
BATTERY NOTES  
• DISPOSE OF OLD BATTERIES PROMPTLY AND PROPERLY.  
• DO NOT BURN OR BURY BATTERIES.  
• USE ONLY FRESH BATTERIES OF THE REQUIRED SIZE AND  
RECOMMENDED TYPE.  
• DO NOT MIX OLD AND NEW BATTERIES, DIFFERENT  
TYPES OF BAT TERIES (STANDARD, ALKALINE, OR  
RECHARGEABLE), OR RECHARGEABLE BATTERIES OF  
DIFFERENT CAPACITIES.  
• IF YOU DO NOT PLAN TO USE THE REMOTE FOR AN  
EXTENDED PERIOD, REMOVE THE BATTERIES. BAT TERIES  
CAN LEAK CHEMICALS THAT CAN DESTROY ELECTRONIC  
PARTS.  
To Insta l l Batteries:  
1. Loosen the screw on the battery compartment  
cover on the back of the remote and remove the  
cover.  
2. Insert four AAA batteries according to the  
polarity symbols (+ and –) marked inside.  
3. Replace the battery cover and tighten the screw.  
• YOU DO NOT HAVE TO REPROGRAM THE REMOTE AFTER REMOVING THE  
BATTERIES, BECAUSE YOUR REMOTE HAS PERMANENT MEMORY  
RETENTION.  
• TO EXTEND BATTERY LIFE, THE DISPLAY TURNS OFF AFTER 10 SECONDS  
OF KEYPAD INACTIVITY AND TURNS ON AGAIN WHEN YOU MOVE THE  
REMOTE CONTROL OR PRESS A KEY.  
BRIGHTNESS ADJUSTMENT OF THE KAMELEON DISPLAY  
Follow the steps below to increase or decrease the  
brightness on the remote’s screen.  
1. Hold down P for at least 3 seconds. The bottom  
of the Infared (IR) Indicator blinks twice, and a  
circle appears around P.  
2. Press 9 7 4.  
3. To increase the brightness press CH+.  
To de c re a se the brightness press CH-.  
4. Press P to store the brightness setting.  
• INCREASING THE BRIGHTNESS OF THE KAMELEON PANEL CAN SHORTEN  
THE BATTERY LIFE. BAT TERY LIFE VARIES FROM 3 - 12 MONTHS  
(DEPENDING ON BRIGHTNESS SETTING).  
Quick Start Guide 5  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
QUICK START GUIDE (CONTINUED)  
ABOUT THE KEYPAD  
1. Kameleon panel  
This remote is powered by Kameleon, a unique  
backlit display that combines the functionality of  
a traditional remote with the power of a touch-  
screen. It only displays the active keys for each  
device mode.  
Each mode has a main screen and menu screen.  
Press MENU to access the menu screen for the  
selected mode.  
After 10 seconds of inactivity, the Kameleon  
backlight turns off to conserve power. Pick up the  
remote or press any key to turn the backlight back  
on.  
2. IR (infrared) Indicator  
The IR Indicator animates when a signal is sent or  
received.“Outgoing IR” appears on the screen  
whenever a function key is pressed. When the  
remote is learning,“incoming IR” appears.  
3. Device keys  
[
]
The TV, VCR, SAT/CBL, CD, AUD and DVD keys  
select the device to be controlled. For example,  
pressing the TV key allows the remote to control  
the functions of your television. As an added  
value, your remote features animated device  
(mode) keys. After pressing a mode key, an ani-  
mation appears to show the currently  
activated mode.  
4. P  
[
]
Use P for all programming sequences. When you  
hold down P for at least 3 seconds, the bottom of  
the IR Indicator blinks twice, and a circle appears  
around P to show that you are in programming  
mode.  
5. SCREEN  
[
]
The SCREEN key gives you the possibility to  
move through the different screens (if applicable)  
within a certain mode during normal use and set  
up mode.  
6. POWER  
[
]
The POWER key controls the same function as on  
your original remote.  
6 Quick Start Guide  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
7. Digit keys  
The digit (1 – 9, 0) keys control the same function  
as on your original remote. In AUD mode, the  
digit keys provide direct input selection.  
8. +100  
Use +100 on some devices to enter channels over  
100 (e.g., for channel 131, press +100, then 3, and  
then 1).  
9. ENTER  
Press ENTER once after entering the channel  
numbers on some TVs,VCRs, Cable and Satellite  
devices. The ENTER key controls the same func-  
tion as on your original remote.  
10.VOL (+/-)  
The volume keys control the same function as on  
your original remote.  
11. LAST  
[
]
Press LAST once to recall the last-viewed channel  
or to page back one screen on the main menu.  
12. MUTE  
[
]
The MUTE key controls the same function as on  
your original remote.  
13. FAV SCAN  
[
]
In the TV,VCR, DVD, SAT and CBL modes, press  
FAV SCAN to scan through favorite channels  
and/or all channels.  
14. CH / SKIP (+/-)  
These keys control the same functions as on your  
original remote. In DVD and CD mode they func-  
tion as SKIP +/- keys.  
15. MENU  
[
]
The MENU key controls the same function as on  
your original remote.  
16. GUIDE  
[
]
Use GUIDE to display the program, guide, or  
setup menu for the selected device.  
17. EXIT  
[
]
Press EXIT to exit the selected device’s program,  
guide, or menu.  
18. INFO  
[
]
Use INFO to display the current channel and pro-  
gram information.  
Quick Start Guide 7  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
QUICK START GUIDE (CONTINUED)  
19. SELECT  
[
]
Press SELECT to choose options from your  
selected device’s menu or guide.  
20. Directional keys  
Use the directional keys to move the cursor in the  
program guide and menu screens. If your stereo  
does not have a menu, these keys allow you to  
adjust the volume of your rear speakers  
+ (  
) or – (  
) and to adjust the balance  
left ( ) and right ( ).  
21. PAGE KEYS / [  
]
Use the Page up and down keys to scroll the  
pages of your program guide and menu screens in  
SAT and CABLE modes.  
22.VCR / DVD / SAT / CD / AUD  
(transport) keys  
When in VCR, DVD, SAT, CD, or AUD mode, these  
keys operate the transport functions (PLAY, FF,  
REW, etc.) of your device. To prevent accidental  
recording, RECORD must be pressed twice to  
start recording.  
23. PIP / [  
]
Use PIP to switch the Picture-in-Picture feature  
on or off (if available on your TV). Instant  
Replay [  
] operates the same function as on  
your TiVo or Replay original remote control.  
24. MOVE / [  
]
Use MOVE to move the window picture (if avail-  
able) to different positions in the main picture.  
Advance operates the same function as on your  
TiVo or Replay original remote control.  
25. FREEZE / LIVE TV [  
]
Press FREEZE once to capture a frame of video in  
the main picture (if available). Press it again to  
resume normal viewing. LIVE TV operates the  
same function as on your TiVo or Replay original  
remote control.  
26. SWAP / [  
]
Use SWAP to switch images and sound (if avail-  
able) between the main and window pictures.  
Slow [  
] operates the same function as on  
your TiVo or Replay original remote control.  
8 Quick Start Guide  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
27. SUR SND / SLEEP  
[
]
When in AUD mode, SUR SND is illuminated to  
allow you to access Surround Sound functionality  
on your audio device. When in TV,VCR, SAT, and  
CBL modes, SLEEP is illuminated to allow you to  
access Sleep functionality on devices that have a  
built-in Sleep timer. These keys operate the same  
function as they did on your original remote  
control.  
28. TV/VCR / A-B  
[
]
Use TV/VCR (A-B) to switch the TV’s input to  
view TV or VCR programs, or to act as your cable  
box’s A/B switch.  
29. M1, M2, M3, M4  
These keys let you customize the remote by learn-  
ing additional functions from your original  
remote (see “The Learning Feature” on page 31).  
Quick Start Guide 9  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
QUICK START GUIDE (CONTINUED)  
SETTING UP THE REMOTE  
The remote is preprogrammed at the factory to  
operate an RCA TV,VCR, DVD and satellite receiv-  
er, and Pioneer CD and audio devices. To control  
devices other than the default brands, perform the  
following steps and repeat them as needed for  
each device to be programmed; otherwise skip  
this section.  
Direct code set up  
TO SET UP THE REMOTE FOR YOUR TELEVISION:  
1. Find your device code in the Manufacturer’s  
code section (page 46 – 60).  
Codes are listed by device type and brand  
name. The most popular code for each brand is  
listed first.  
2. Make sure your television is switched on.  
3. Press and release TV.  
4. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
5. Enter your four-digit code using the number  
keys. The bottom of the IR Indicator blinks  
once after each of the first three digits are  
entered. After the fourth digit, it blinks twice to  
confirm that a valid four-digit code has  
been entered.  
6. Aim your remote at your television and press  
POWER. If your television switches off, your  
remote is ready to control your television.  
• IF YOUR DEVICE DOES NOT RESPOND, FOLLOW STEPS 1 THROUGH 6 WITH  
EACH CODE LISTED FOR YOUR BRAND. IF NONE OF THE CODES LISTED FOR  
YOUR BRAND OPERATE YOUR DEVICE, SEE “SEARCH METHOD” ON PAGE  
12 FOR OTHER OPTIONS.  
• SOME CODES ARE QUITE SIMILAR. IF YOUR DEVICE DOES NOT RESPOND  
OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES, TRY  
ANOTHER CODE LISTED UNDER YOUR BRAND.  
• IF THE ORIGINAL REMOTE CONTROL FROM YOUR VCR DID NOT HAVE A  
POWER KEY, PRESS PLAY INSTEAD OF POWER DURING STEP 6.  
• TO SET UP YOUR OTHER DEVICES, FOLLOW THE SAME INSTRUCTIONS  
ABOVE, BEING SURE TO PRESS THE APPROPRIATE DEVICE KEY DURING  
STEP 3.  
• REMEMBER TO PRESS THE CORRECT DEVICE KEY BEFORE OPERATING  
YOUR DEVICE. ONLY ONE DEVICE (CD, AMPLIFIER, CABLE, ETC.) CAN BE  
10 Quick Start Guide  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
ASSIGNED TO A DEVICE KEY. IF YOUR ORIGINAL REMOTE OPERATES MORE  
THAN ONE DEVICE (FOR EXAMPLE, A RECEIVER, CD PLAYER, AND CAS-  
SETTE PLAYER IN ONE REMOTE), YOU NEED TO SET UP EACH DEVICE  
SEPARATELY.  
• WRITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK,  
EASY REFERENCE.  
Devices types that can be set up under the  
following mode keys:  
- TV  
- VCR  
- DVD  
- CASSETTE PLAYER  
- LASER DISK PLAYER  
- DIGITAL AUDIO TAPE - XBOX  
- PVR  
- PLAYSTATION2  
- SATELLITE  
RECEIVER  
- CABLE BOX  
- VIDEO ACCESSORY  
- AMP/TUNER  
- AMPLIFIER  
- HOME THEATER  
- CD PLAYER  
- HOME ACCESSORY  
To s e t up a second TV,VCR, SAT, CD, AUD or DVD,  
see page 36.  
Programming a TV/VCR Combo  
1. Find the codes for the devices you want to pro-  
gram in Setup Codes for TV/VCR Combos on  
page 55 and write them down or highlight  
them.  
2. Turn on the TV/VCR Combo and insert a video-  
cassette.  
3. Press and release VCR.  
4. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
5. Enter your four-digit code using the number  
keys. The bottom of the IR Indicator blinks  
once after each of the first three digits are  
entered, and blinks twice after the fourth digit  
to confirm that a valid four-digit code has been  
entered.  
6. Aim your remote at your TV/VCR and press  
POWER. If your television switches off, your  
remote should be ready to control your  
TV/VCR.  
Quick Start Guide 11  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
QUICK START GUIDE (CONTINUED)  
• IF YOUR DEVICE DOES NOT RESPOND, FOLLOW STEPS 1 THROUGH 6 WITH  
EACH CODE LISTED FOR YOUR BRAND. IF NONE OF THE CODES LISTED FOR  
YOUR BRAND OPERATE YOUR DEVICE, THEN TRY “SEARCH METHOD” ON  
PAGE 12.  
• SOME CODES ARE QUITE SIMILAR. IF YOUR DEVICE DOES NOT RESPOND  
OR IS NOT FUNCTIONING PROPERLY WITH ONE OF THE CODES, TRY  
ANOTHER CODE LISTED UNDER YOUR BRAND.  
• IF THE ORIGINAL REMOTE CONTROL DID NOT HAVE A POWER KEY,  
PRESS PLAY INSTEAD OF POWER DURING STEP 5.  
• WRITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK,  
EASY REFERENCE.  
SEARCH METHOD  
If your device does not respond to the remote  
after trying all codes listed for your brand, try  
manually searching for your code. The Search  
Method allows you to find the code for your  
device by scanning through all the codes con-  
tained in the memory of the remote. The Search  
Method may also work if your brand is not listed  
at all.  
TO SEARCH FOR YOUR TV CODE:  
1. Switch your Television on (not on standby).  
2. Press TV.  
3. Aim the remote at your television. Hold down P  
for at least 3 seconds. The bottom of the IR  
Indicator blinks twice, and a circle appears  
around P.  
4. Press 9 9 1. The bottom part of the IR Indicator  
blinks twice.  
5. Press POWER. If the TV turns off, you have  
found your code. If not, press the TV key to  
cycle to the next code, and press POWER again.  
Repeat this process until you find the code that  
turns off your TV.You may have to repeat this  
sequence many times so please be patient.  
Remember to keep pointing the remote at your  
television while pressing these keys.  
6. When your television switches off, press P to  
store the code.  
Now your remote is ready to control your  
television.  
12 Quick Start Guide  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
• IF YOU CANNOT CONTROL YOUR TELEVISION PROPERLY, PLEASE CONTINUE  
THE SEARCH METHOD AS YOU MAY BE USING THE WRONG CODE.  
• DURING STEP 5, IT IS ALSO POSSIBLE TO SEND ANOTHER SIGNAL INSTEAD  
OF THE POWER SIGNAL. SIMPLY PRESS ANY OF THE FOLLOWING KEYS  
DURING STEP 5 INSTEAD OF THE POWER KEY: 0, 1, 2, 3, CH+,  
VOL+, PLAY OR STOP. IF, FOR EXAMPLE, DURING STEP 5 YOU PRESS  
“2” INSTEAD OF “POWER”, THE REMOTE WILL SEND THE “NUMBER 2”  
SIGNAL (MAKE SURE YOUR TV IS SWITCHED TO A CHANNEL OTHER THAN  
2).  
• IF NO KEY IS PRESSED WITHIN 30 SECONDS DURING STEP 5, THE REMOTE  
EXITS THE SET UP MODE AND RETURNS TO THE CODE PREVIOUSLY SET UP  
BEFORE STARTING THIS PROCESS.  
• TO SEARCH FOR YOUR OTHER DEVICES, FOLLOW THE SAME INSTRUCTIONS  
ABOVE, ONLY PRESS THE APPROPRIATE DEVICE KEY DURING STEP 2 AND  
5.  
• IF YOUR VCR’S ORIGINAL REMOTE CONTROL DOES NOT HAVE A POWER  
KEY, PRESS PLAY INSTEAD OF POWER DURING STEP 5.  
Congratulations! You should now have your  
remote set up to operate your home entertain-  
ment components. For instructions on how to  
operate advanced features of your remote, like  
Favorite Channel Scan,Volume Lock, and Macros,  
see page 27.  
Quick Start Guide 13  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
INTRODUCCIÓN  
Gracias por comprar un control remoto  
“Radioshack 6-in-one” potenciado por Kameleon.  
Este dispositivo que acaba de adquirir representa  
la última generación en tecnología de controles  
remotos. Sólo muestra en pantalla las teclas acti-  
vas para cada dispositivo, por lo que cada pantalla  
resulta simple para el usuario y única para cada  
dispositivo. Este control remoto de fácil manejo  
también incluye iconos animados para identificar  
el dispositivo seleccionado.  
Está diseñado para operar hasta seis aparatos  
domésticos de entretenimiento, incluyendo TV,  
VCR, convertidor de cable, receptor de satélite,  
reproductor de CD, receptor de audio, amplifi-  
cador, home-theather-in-a-box (cinema en casa),  
reproductor de DVD, y otros dispositivos  
automáticos de la casa como el control automati-  
zado de luces. Su 6-en-Uno viene ya  
preprogramado con los comandos más usados en  
sus aparatos domésticos de entretenimiento y con  
características avanzadas como:  
• Macros – para una instante activación de sus  
preferidas secuencias de teclas.  
• Aprendizaje – para capturar y reproducir fun-  
ciones particulares propias de los controles  
remotos originales de sus aparatos.  
• Búsqueda de código y verificación – le ayuda  
con la configuración de su control remoto para  
que opere sus aparatos.  
• Búsqueda de canales y de canal favorito – le  
permite visualizar rápidamente todos los  
canales disponibles y sus favoritos.  
• Asignación fija de volumen – para asignar los  
controles de volumen a cada aparato o a uno  
mismo para todos.  
• Menú dedicado/Teclas de guía – para acceder  
de forma instantánea a guías y menús de pro-  
gramas de cable y satélite  
• Biblioteca de códigos localizables – contiene  
el grupo de códigos de controles remotos infrar-  
rojos más grande y eficiente del mundo, práctica  
mente para cada marca y fabricante existente.  
• Picture-in-Picture – admite la funcionalidad  
de una imagen dentro de otra imagen con la que  
vienen algunas TVs.  
Después de haber instalado cuatro (4) baterías  
alcalinas AAA nuevas (sólo disponible en  
RadioShack), podrá usar inmediatamente su con-  
trol remoto 6-en-Uno para controlar sus aparatos  
RCA como TV,VCR, DVD y receptor de satélite, al  
igual que sus aparatos Pioneer de audio y CD.  
14 GUÍA DE INICIO RÁPIDO  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Para controlar otras marcas y dispositivos, favor  
de llevar a cabo las instrucciones de la página 14  
en Configuración del 6-en-Uno.  
GUÍA DE INICIO RÁPIDO  
INSTALACIÓN DE BATERÍAS  
Su control remoto necesita cuatro baterías AAA  
(no incluidas) para el suministro de energía. Para  
un mejor rendimiento y mayor duración,  
recomendamos las baterías alcalinas RadioShack.  
NOTAS SOBRE LA BATERÍA:  
• Deshágase de las baterías viejas de manera  
apropiada.  
• No las queme ni entierre.  
• Utilice sólo baterías nuevas del tamaño y tipo  
recomendado.  
• No mezcle baterías viejas y nuevas o de difer-  
entes tipos (p.ej. estándar, alcalinas o  
recargables), o baterías recargables de diferentes  
capacidades.  
• Si no tiene pensado usar el control remoto por  
un tiempo prolongado, es mejor quitar las  
baterías. Las baterías pueden derramar quími-  
cos que pueden llegar a destruir las partes  
electrónicas del equipo.  
INSTALACIÓN DE BATERÍAS:  
1. Desatornille y quite la tapa del compartimiento  
de las baterías de su control 6-en-Uno.  
2. Coloque los polos positivo (+) y negativo (-) de  
las baterías con las marcas + y – indicadas en  
el compartimiento.  
3. Coloque de nuevo la tapa y los tornillos.  
• REEMPLAZAR LAS BATERÍAS NO LE REQUERIRÁ REPROGRAMAR SU CON-  
TROL REMOTO, YA QUE EL 6 EN-UNO CUENTA CON RETENCIÓN  
PERMANENTE DE MEMORIA.  
• PARA ALARGAR LA VIDA DE LAS BATERÍAS, LA PANTALLA SE APAGA TRAS  
10 SEGUNDOS DE INACTIVIDAD Y SE ENCIENDE DE NUEVO CUANDO SE  
MUEVE EL CONTROL.  
• TAMBIÉN ES POSIBLE AUMENTAR O DISMINUIR EL BRILLO DEL PANEL  
KAMELEON DE SU 6-EN-UNO. PARA HACER ESTO, CONSULTE LA PÁGINA  
16.  
GUÍA DE INICIO RÁPIDO 15  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
GUÍA DE INICIO RÁPIDO  
AJUSTE DEL BRILLO DE LA PANTALLA KAMELEON  
Para aumentar o disminuir el brillo de la pantalla  
Kameleon de su 6-en-Uno.  
1. Presione y mantenga presionada la tecla P al  
menos 3 segundos. La parte inferior del indi-  
cador IR parpadeará dos veces, y aparecerá un  
círculo alrededor de la tecla P.  
2. Presione 9 7 4.  
3. Para aumentar el brillo, presione CH+. Para  
disminuir el brillo, presione CH-.  
4. Presione P para guardar la configuración del  
brillo.  
• AUMENTAR EL BRILLO DEL PANEL KAMELEON PUEDE ACORTAR LA  
DURACIÓN DE LAS BATERÍAS. LA VIDA DE LAS BATERÍAS VARÍA ENTRE 3 Y  
12 MESES, DEPENDIENDO DE LA CONFIGURACIÓN DEL BRILLO.  
ACERCA DEL TECLADO  
1. Panel Kameleon  
Este control remoto 6-en-Uno viene con  
Kameleon, una pantalla iluminada que combina la  
funcionalidad de un control remoto tradicional y  
la comodidad de una pantalla sensible al tacto  
(touchscreen). Sólo muestra las teclas activas para  
el modo de cada aparato.  
Cada modo tiene una pantalla principal y una  
pantalla con el menú. Presione MENU para  
acceder a la pantalla del menú correspondiente al  
modo en el que está.  
TRAS 10 SEGUNDOS DE INACTIVIDAD, LA ILUMINACIÓN DE FONDO DE LA  
PANTALLA KAMELEON SE APAGARÁ PARA CONSERVAR LAS BATERÍAS. AL  
PRESIONAR CUALQUIER TECLA DEL CONTROL REMOTO, VOLVERÁ LA LUMI-  
NOSIDAD.  
2. IR (infrared) Indicator  
El IR Indicator (indicador de rayos infrarrojos) se  
activa al estar enviando o recibiendo una señal de  
rayos infrarrojos. El indicador mostrará “outgoing  
IR” cuando se presiona una tecla de una función.  
Cuando se esté usando la Característica de  
Aprendizaje, el indicador mostrará “incoming IR”.  
3. Teclas de aparatos  
[
]
Las teclas TV, VCR, SAT/CBL, CD, AUD y DVD  
seleccionan el aparato que desea controlar.Así, si  
presiona la tecla TV, su control remoto controlará  
las funciones de su televisión. Como valor agregado,  
su 6-en-Uno presenta teclas animadas para los  
diferentes aparatos (modos). Después de presionar  
una tecla de modo, empezará un movimiento ani-  
mado, para mostrar la modalidad actualmente  
activa.  
16 GUÍA DE INICIO RÁPIDO  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
4. P  
[
]
Use P para todas las secuencias de programación.  
Cuando presiona y mantiene presionada la tecla P  
por al menos durante 3 segundos, la parte inferior  
del IR Indicator parpadeará dos veces, y apare-  
cerá un círculo alrededor de la tecla P para  
indicarle que está en la modalidad de progra-  
mación.  
5. SCREEN  
[
]
La tecla SCREEN le da la posibilidad de moverse  
a través de las diferentes pantallas (si aplica) den-  
tro de un modo determinado durante el uso  
normal y el modo de configuración.  
6. POWER  
[
]
La tecla POWER controla la misma función que  
en su control remoto original.  
7. Teclas numéricas  
Las teclas de números (1 – 9, 0) controlan la  
misma función que en su control remoto original.  
En el modo AUD, estas teclas ofrecerán selección  
de entrada directa.  
8. +100  
Use +100 para teclear canales superiores al 100  
(p.ej. para el canal 131, presione +100, luego 3 y  
luego 1).  
9. ENTER  
En algunos aparatos de TV,VCR, de cable y de  
satélite, hay que presionar ENTER una vez  
después de teclear el número del canal deseado.  
La tecla ENTER controla la misma función que  
en su control remoto original.  
10.VOL (+/-)  
Las teclas de volumen controlan la misma función  
que en su control remoto original.  
11. LAST  
[
]
Presione LAST una vez para recuperar el último  
canal visto o regresar a la pantalla anterior en el  
menú principal.  
12. MUTE  
[
]
La tecla MUTE controla la misma función que su  
control remoto original.  
13. FAV SCAN  
[
]
En los modos TV, VCR, DVD, SAT y CBL, presione  
FAV SCAN para buscar a través de sus canales  
favoritos y/o todos los canales.  
GUÍA DE INICIO RÁPIDO 17  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
GUÍA DE INICIO RÁPIDO  
14. CH / SKIP (+/-)  
Estas teclas controlan las mismas funciones que  
en su control remoto original. En los modos DVD  
y CD, funcionan como las teclas SKIP +/-.  
15. MENU  
[
]
La tecla MENU controla la misma función que su  
control remoto original.  
16. GUIDE  
[
]
Use GUIDE para mostrar el programa, la guía o el  
menú de configuración para el aparato selec-  
cionado.  
17. EXIT  
[
]
Presione EXIT para salir del programa, guía o  
menú del aparato seleccionado.  
18. INFO  
Use INFO para mostrar la información sobre el  
canal y el programa actual.  
19. SELECT  
[
]
Presione SELECT para seleccionar las opciones  
desde el menú o guía de su aparato seleccionado.  
20. Teclas direccionales  
Use las teclas direccionales para mover el cursor a  
través de las pantallas de la guía del programa y  
del menú. Si su aparato estereofónico no tiene un  
menú, estas teclas le permitirán ajustar el volu-  
men de sus bocinas más alto (  
) o más bajo  
) y para ajustar el balance a la izquierda  
) o a la derecha ( ).  
(
(
21. PAGE KEYS / [  
]
Use las teclas direccionales a voluta a través de  
las pantallas de la guía del programa y del menú.  
22. Teclas de movimiento de VCR / DVD / SAT /  
CD / AUD  
Estando en el modo VCR, DVD, SAT, CD o AUD,  
estas teclas operan las funciones de movimiento  
(PLAY, FF, REW etc.) de su aparato. En las pan-  
tallas del menú de los modos SAT y CBL, las teclas  
Page Up/Down se iluminarán en su lugar. Para  
prevenir la grabación accidental, la tecla  
RECORD debe presionarse dos veces para que  
empiece la grabación.  
18 GUÍA DE INICIO RÁPIDO  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
23. PIP / [  
]
Use PIP para activar y desactivar la característica  
de Picture-in-Picture (sólo si su TV cuenta con  
esta funcionalidad). La tecla [  
] Instant  
Replay (reproducción instantánea) realiza la  
misma función que en su control remoto original  
TiVo o Replay.  
24. MOVE / [  
]
Use MOVE para colocar la imagen de la ventana  
(si está disponible) en diferentes posiciones den-  
tro de la imagen principal. La tecla Advance  
realiza la misma función que en su control remoto  
original TiVo o Replay.  
25. FREEZE / LIVE TV  
[
]
Presione FREEZE una vez para capturar una  
cuadro de video en la imagen principal (si está  
disponible). Presione otra vez para volver a la  
visualización normal. La tecla LIVE TV realiza la  
misma función que en su control remoto original  
TiVo o Replay.  
26. SWAP / [  
]
Use SWAP para intercambiar la imagen y el  
sonido (si está disponible) entre la imagen princi-  
pal y la de la ventana. La tecla Slow key [  
]
realiza la misma función que en su control remoto  
original TiVo o Replay.  
27. SUR SND / SLEEP  
[
]
Cuando se está en el modo AUD, la tecla SUR  
SND se ilumina para permitirle el acceso a la fun-  
ción Surround Sound de su aparato de audio.  
Cuando se está en el modo TV, VCR, SAT o CBL, la  
tecla SLEEP se ilumina para permitirle el acceso a  
la función Sleep en los aparatos que incorporen  
un temporizador. Estas teclas controlan las mis-  
mas funciones que en su control remoto original.  
28. TV/VCR / A-B  
[
]
Use TV/VCR (A-B) para cambiar la entrada de la  
TV para ver programas de TV o VCR, o para  
asumir las funciones del interruptor A/B de su  
equipo de cable.  
29. M1, M2, M3, M4  
Estas teclas le dan la posibilidad de personalizar  
el control 6-en-Uno usándolas como teclas Macro  
o teclas adicionales para que asuman funciones  
de su control remoto original a través de la  
Característica de Aprendizaje (vea la página 31).  
GUÍA DE INICIO RÁPIDO 19  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
GUÍA DE INICIO RÁPIDO  
CONFIGURACIÓN DEL 6-EN-UNO  
El control remoto viene preprogramado para  
operar un aparato RCA TV,VCR, DVD, un receptor  
de satélite y aparatos de audio y CD Pioneer. Para  
controlar otros aparatos que no se ajustan a las  
marcas por defecto, siga estos pasos y repítalos  
tanto como sea necesario para cada aparato que  
quiera programar. Si no es su caso, ignore esta  
sección.  
Configuración directa de código  
EJEMPLO: PARA CONFIGURAR EL CONTROL 6-EN-UNO DE  
SU TELEVISIÓN:  
1. Busque el código de su aparato en la sección de  
Códigos del fabricante (página 46 - 60).  
Los códigos aparecen clasificados por tipo y  
marca de aparato. Los códigos más populares  
para cada marca aparecen en primer lugar.  
2. Compruebe que su televisión está encendida.  
3. Presione la tecla TV.  
4. Presione y mantenga presionada la tecla P al  
menos 3 segundos. La parte inferior del indi-  
cador IR parpadeará dos veces, y aparecerá un  
círculo alrededor de la tecla P.  
5. Escriba su código de cuatro dígitos usando las  
teclas numéricas. La parte inferior del indi-  
cador IR parpadeará cada vez que se teclee un  
dígito; tras el cuarto dígito, parpadeará dos  
veces para confirmar que el código ingresado es  
válido.  
6. Ahora, apunte su control 6-en-Uno hacia su  
televisión y presione POWER. Si su televisión  
se apaga, su control 6-en-Uno está listo para  
controlar su televisión.  
• SI EL APARATO NO RESPONDE, SIGA LOS PASOS DEL 1 AL 6 CON CADA  
CÓDIGO LISTADO PARA SU MARCA. SI NINGUNO DE LOS CÓDIGOS FUN-  
CIONA, INTENTE CON EL MÉTODO DE BÚSQUEDA DESCRITO EN LA  
PÁGINA 21, AÚN CUANDO SU MARCA NO APAREZCA LISTADA.  
• ALGUNOS CÓDIGOS SON MUY SIMILARES. SI SU APARATO NO RESPONDE O  
NO FUNCIONA CORRECTAMENTE CON ALGUNO DE LOS CÓDIGOS, INTÉNTE-  
LO CON OTRO CÓDIGO LISTADO PARA SU MARCA.  
• SI EL CONTROL REMOTO ORIGINAL DE SU VCR NO TIENE LA TECLA  
POWER, PRESIONE PLAY EN SU LUGAR EN EL PASO 6.  
• PARA CONFIGURAR LOS OTROS APARATOS, SIGA LAS MISMAS INSTRUC-  
CIONES, ASEGURÁNDOSE DE QUE PRESIONA LA TECLA DEL APARATO  
APROPIADO EN EL PASO 3.  
20 GUÍA DE INICIO RÁPIDO  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
• RECUERDE PRESIONAR LA TECLA DEL APARATO CORRECTO ANTES DE  
OPERAR EL APARATO. SÓLO SE PUEDE ASIGNAR UN APARATO (CD, AMPLI-  
FICADOR, CABLE, ETC.) A CADA TECLA DE APARATO. SI SU CONTROL  
REMOTO ORIGINAL OPERABA MÁS DE UN APARATO (POR EJEMPLO, UN  
RECEPTOR, UN REPRODUCTOR DE CD Y UNA REPRODUCTOR DE CASSETTE  
EN UN MISMO CONTROL REMOTO), NECESITARÁ CONFIGURAR CADA  
APARATO POR SEPARADO.  
• ESCRIBA SU CÓDIGO EN EL LUGAR OFRECIDO EN LA PÁGINA 26, PARA SU  
RÁPIDA LOCALIZACIÓN.  
Tipos de aparatos que pueden ser configura-  
dos bajo las siguientes teclas de modo:  
- VIDEO GRABADORA - DVD  
- TELEVISOR  
- REPRODUCTOR DEL  
CASSETTE AUDIO  
- REPRODUCTOR DE  
- REPRODUCTOR DEL  
DISCO LASER  
- XBOX  
CINTA AUDIO DIGITAL - PLAYSTATION2  
- VIDEO GRABADORA  
PERSONAL  
- RECEPTOR DE  
SATÉLITE  
- CONVERTIDOR DE  
CABLE  
- RECEPTOR DE  
AUDIO  
- AMPLIFICADOR  
- HOME THEATER  
- REPRODUCTOR DE CD  
- OTROS DISPOSTIVOS  
AUTOMÁTICOS DE LA  
CASA  
Para configurar un segundo aparato de TV,VCR,  
SAT, CD, AUD o DVD (vea la página 36)  
Método de Búsqueda  
Si su aparato no responde al control 6-en-Uno  
después de haberlo intentado con todos los códi-  
gos enumerados para su marca, busque  
manualmente su código. El Método de Búsqueda  
le permite encontrar el código para su aparato  
buscando entre todos los códigos contenidos en la  
memoria del 6-en-Uno. El Método de Búsqueda  
también funciona si la marca no aparece en el lis-  
tado.  
EJEMPLO: PARA BUSCAR EL CÓDIGO DE SU TV:  
1. Encienda su televisión (no en "standby").  
2. Presione la tecla TV de su control 6-en-Uno.  
3. Apunte el control hacia su televisión. Presione y  
mantenga presionada la tecla P al menos 3  
segundos. La parte inferior del indicador IR  
parpadeará dos veces, y aparecerá un círculo  
alrededor de la tecla P.  
4. Presione 9 9 1. La parte inferior del IR Indicator  
parpadeará dos veces.  
GUÍA DE INICIO RÁPIDO 21  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
GUÍA DE INICIO RÁPIDO  
5. Enseguida, presione POWER. Si la TV se apaga,  
significa que ha encontrado su código. Si no se  
apaga, presione la tecla TV para pasar al sigu-  
iente código, entonces presione POWER de  
nuevo. Repita este proceso hasta que encuentre  
el código que apague su TV. Quizás tenga que  
repetir esta secuencia varias veces, así que sea  
paciente. Recuerde mantener su 6-en-Uno  
apuntando a su televisión mientras presiona  
estas teclas.  
6. Cuando su televisión se apague, presione la  
tecla P para que el control recuerde el código.  
Ahora su 6-en-Uno está listo para controlar su  
televisión.  
• SI NO PUEDE CONTROLAR SU TELEVISIÓN CORRECTAMENTE, POR FAVOR,  
CONTINÚE CON EL MÉTODO DE BÚSQUEDA HASTA QUE FUNCIONE COR-  
RECTAMENTE.  
• DURANTE EL PASO 5, TAMBIÉN ES POSIBLE ENVIAR OTRA SEÑAL EN  
LUGAR DE LA SEÑAL DE POWER. PRESIONE CUALQUIERA DE LAS  
TECLAS SIGUIENTES DURANTE EL PASO 5 EN LUGAR DE LA TECLA  
POWER: 0, 1, 2, 3, CH+,VOL+, PLAY O STOP. ASÍ, SI EN EL  
PASO 5 PRESIONA “2” EN LUGAR DE “POWER”, EL CONTROL 6-EN-UNO  
ENVIARÁ LA SEÑAL “NÚMERO 2” (ASEGÚRESE DE QUE SU TV NO ESTÁ  
EN EL CANAL NÚMERO 2 PARA QUE PUEDA HACER EL CAMBIO).  
• SI DURANTE EL PASO 5 NO SE PRESIONA NINGUNA TECLA EN 30 SEGUN-  
DOS, EL CONTROL REMOTO ANULARÁ EL PROCESO DE CONFIGURACIÓN EN  
EL QUE ESTÉ TRABAJANDO Y REGRESARÁ AL CÓDIGO CONFIGURADO  
ANTES DE COMENZAR CON ESTE PROCESO.  
• PARA CONFIGURAR LOS OTROS APARATOS, SIGA LAS MISMAS INSTRUC-  
CIONES, ASEGURÁNDOSE DE QUE PRESIONA LA TECLA DEL APARATO  
APROPIADO EN LOS PASOS 2 Y 5..  
• SI EL CONTROL REMOTO ORIGINAL DE SU VCR NO TIENE LA TECLA  
POWER, PRESIONE PLAY EN SU LUGAR EN EL PASO 5.  
¡Felicidades! Ahora debe tener su control  
remoto 6-en-Uno configurado para manejar  
los aparatos de entretenimiento de su casa.  
22 GUÍA DE INICIO RÁPIDO  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
GUÍA DE INICIO RÁPIDO 23  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
KEY TABLE  
KEY LABEL  
TV  
VCR  
DVD  
1
2
3
4
5
6
7
8
9
0
DIGIT 1  
DIGIT 2  
DIGIT 3  
DIGIT 4  
DIGIT 5  
DIGIT 6  
DIGIT 7  
DIGIT 8  
DIGIT 9  
DIGIT 0  
DIGIT 1  
DIGIT 2  
DIGIT 3  
DIGIT 4  
DIGIT 5  
DIGIT 6  
DIGIT 7  
DIGIT 8  
DIGIT 9  
DIGIT 0  
DIGIT 1  
DIGIT 2  
DIGIT 3  
DIGIT 4  
DIGIT 5  
DIGIT 6  
DIGIT 7  
DIGIT 8  
DIGIT 9  
DIGIT 0  
CHANNEL/  
SKIP UP  
CHANNEL UP  
CHANNEL UP  
CHANNEL DN  
CHANNEL UP;  
SKIP FORWARD  
CHANNEL/SKIP DN CHANNEL DN  
CHANNEL DN;  
SKIP REV  
LAST  
LAST  
LAST; REPEAT  
TV/DVD  
MENU;  
TV/VIDEO  
MENU  
TV/VCR  
MENU  
GUIDE  
GUIDE; MENU  
SETUP MENU  
DISPLAY  
EXIT  
DISPLAY; MENU  
EXIT  
DISPLAY  
EXIT  
UP  
UP  
UP  
DOWN  
LEFT  
DOWN  
LEFT  
DOWN  
LEFT  
RIGHT  
RIGHT  
RIGHT  
+100  
-----  
+100; +10  
-----  
PIP ON/PIP  
INSTANT REPLAY  
PIP MOVE  
ADVANCE;  
QUICK SKIP  
DISC  
-----  
-----  
-----  
PIP OFF;  
PIP FREEZE  
LIVE TV  
SLOW  
PIP SWA P  
SLEEP  
SLEEP  
24 Key Table  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
CABLE/SAT  
VIDEO ACC.  
CD  
AUDIO  
DIGIT 1  
DIGIT 2  
DIGIT 3  
DIGIT 4  
DIGIT 5  
DIGIT 6  
DIGIT 7  
DIGIT 8  
DIGIT 9  
DIGIT 0  
CHANNEL UP  
DIGIT 1; TRACK 01  
DIGIT 2; TRACK 02  
DIGIT 3; TRACK 03  
DIGIT 4; TRACK 04  
DIGIT 5; TRACK 05  
DIGIT 6; TRACK 06  
DIGIT 7; TRACK 07  
DIGIT 8; TRACK 08  
DIGIT 9; TRACL 09  
DIGIT 0; TRACK 10  
CHANNEL UP  
SOURCE 1  
SOURCE 2  
SOURCE 3  
SOURCE 4  
SOURCE 5  
SOURCE 6  
SOURCE 7  
SOURCE 8  
SOURCE 9  
SOURCE 10  
PRESET UP;  
STATION UP  
CHANNEL DN  
CHANNEL DN  
PRESET DN;  
STATION DN  
LAST  
REPEAT  
REPEAT  
INPUT  
MENU  
A/B; BYPASS  
MENU  
-----  
MENU; PROGRAM  
GUIDE  
-----  
GUIDE; SETUP MENU;  
PROGRAM; MENU  
INFO  
EXIT  
UP  
DISPLAY  
DISPLAY  
EXIT; CLEAR  
UP; DISC UP  
DOWN; DISC DOWN  
LEFT  
EXIT; CLEAR  
UP; REAR +  
DOWN  
LEFT  
DOWN; REAR –  
LEFT; BALANCE LEFT  
RIGHT  
RIGHT  
+10  
RIGHT; BALANCE RIGHT  
BAND; AM/FM  
-----  
-----  
INSTANT REPLAY  
-----  
ADVANCE;  
QUICK SKIP  
DISC  
-----  
-----  
-----  
-----  
-----  
-----  
LIVE TV  
SLOW  
SLEEP  
SURROUND MODE;  
SURROUND ON/OFF  
Key Table 25  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
CODE VERIFICATION  
If you have set up your remote via the Search  
Method, you can “blink” back your code for future  
reference. Please notice that the bottom part of  
the IR Indicator will indicate the 4 digits by blink-  
ing the number of times to represent each digit.  
TO BLINK BACK YOUR TELEVISION CODE:  
1. Press TV on your remote.  
2. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
3. Press 9 9 0. The bottom part of the IR Indicator  
blinks twice.  
4. For the first digit of your four-digit code, press  
1 and count the number of times the animated  
IR Indicator blinks. If it does not blink, the digit  
is “0”.  
5. For the second digit, press 2 and count the animat-  
ed blinks. If it does not blink, the digit is“0”.  
6. For the third digit, press 3 and count the animated  
blinks. If it does not blink, the digit is“0”.  
7. For the fourth digit, press 4 and count the animat-  
ed blinks. If it does not blink, the digit is“0”.  
• TO BLINK BACK THE CODE FOR YOUR OTHER DEVICES FOLLOW THE  
INSTRUCTIONS ABOVE, BEING SURE TO PRESS THE APPROPRIATE DEVICE  
KEY DURING STEP 1.  
• IF YOU PRESS ANY DIGIT BESIDES 1 AFTER PRESSING 9 9 0, THE REMOTE  
EXITS SET UP MODE. IF YOU DO NOT PRESS A KEY FOR 30 SECONDS, THE  
REMOTE WILL EXIT THE SET UP MODE.  
QUICK CODE REFERENCE  
Write down the codes for your devices in the  
boxes below for quick and easy reference.  
Device type  
VCR  
Code  
CBL/SAT  
TV  
CD  
DVD  
AUDIO  
26 Code Verification  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
VOLUME LOCK  
In its default (unlocked) state, the remote allows  
each device to control its own volume only in its  
own mode (e.g., TV volume in the TV mode,VCR  
volume in VCR mode, etc.). However, using your  
remote’s Volume Lock feature, you can adjust the  
volume for a certain device (e.g., TV) while in a  
different mode (e.g.,VCR). For example, if you’re  
watching a movie on your VCR, you can adjust the  
volume on your TV without first pressing TV.  
Yo u c a n further customize the setting by unlock-  
ing the volume controls (see “To Cancel the  
Vo lume Lock Across All Modes” on page 28), so  
your device’s volume controls are unlocked in one  
mode, but locked in all other modes.  
To lo ck t he volu me control to the TV while in  
another mode (VCR, DVD, SAT, AUD or CD  
mode):  
1. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
2. Press 9 9 3. The bottom of the IR Indicator  
blinks twice.  
3. Press TV and the bottom part of the IR  
Indicator blinks twice. Now you can control  
VOL+/- or MUTE functions of your TV while in  
other modes.  
To u n lo ck t he volu me control for a specific  
mode:  
TO CANCEL THE VOLUME LOCK TO YOUR CD  
1. Press CD once.  
2. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
3. Press 9 9 3. The bottom of the IR Indicator  
blinks twice.  
4. Press VOL (-) and the bottom part of the IR  
Indicator blinks four times. Now when in CD  
mode, you will be able to control VOL+/- func-  
tions of your CD (provided it has volume  
control).  
Volume Lock 27  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
VOLUME LOCK (CONTINUED)  
To c a ncel t he volu me lock across all modes  
1. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
2. Press 9 9 3. The bottom of the IR Indicator  
blinks twice.  
3. Then press the VOL (+) key and the bottom  
part of the IR Indicator blinks four times. Now  
in all modes, the VOL+, VOL- and MUTE keys  
operate the original function again.  
• VOLUME LOCK DOES NOT APPLY FOR MODES THAT HAVE BEEN CHANGED  
(SEE PAGE 36).  
28 Volume Lock  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
FAVORITE CHANNEL SCAN  
In the TV,VCR, DVD, SAT, or CBL mode, the  
remote can store up to 10 favorite channels, in any  
order, that immediately scan when you press FAV  
SCAN once (see Using Channel Scan on the next  
page).  
NOTE: ONLY CHANNELS OF ONE MODE CAN BE STORED AND ANY PREVI-  
OUSLY STORED CHANNELS WILL BE CLEARED.  
TO SET UP FAVORITE CHANNEL SCAN FOR YOUR TV  
1. Press TV on your remote.  
2. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
3. Press 9 9 6. The bottom of the IR Indicator  
blinks twice.  
4. Use the number keys to enter a favorite channel  
number (e.g., 0 3 1).  
NOTE: IF THE ORIGINAL REMOTE CONTROL REQUIRED PRESSING  
ENTER TO CHANGE THE CHANNEL, ALSO PRESS ENTER AFTER THE  
CHANNEL NUMBER (E.G., 0 - 3 - 1 - ENTER).  
5. If desired, press P and then use the number  
keys to enter your next favorite channel. Up to  
10 favorite channels can be stored.  
6. When finished, hold down P for at least 3 sec-  
onds. The bottom of the IR Indicator blinks  
twice.  
NOTE: ONCE THE TENTH CHANNEL HAS BEEN ENTERED, THE REMOTE  
EXITS THE PROGRAMMING MODE AUTOMATICALLY.  
• TO SET UP FAVO RITE CHANNEL SCAN FOR A DIFFERENT MODE, PRESS  
THE APPROPRIATE MODE IN STEP 1 AND FOLLOW THE SAME INSTRUC-  
TIONS ABOVE.  
• EACH FAVO RITE CHANNEL CAN BE UP TO FIVE DIGITS IN LENGTH. AFTER  
A FIFTH DIGIT IS ENTERED, THE REMOTE STORES THAT CHANNEL NUM-  
BER AND IS READY TO STORE THE NEXT CHANNEL NUMBER. IT IS NOT  
NECESSARY TO PRESS P TO ENTER THE NEXT CHANNEL NUMBER.  
Favorite Channel Scan 29  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
USING CHANNEL SCAN  
In the VCR, CBL, SAT, TV, and DVD modes, use  
the FAV SCAN key to start a 3-second scan of all  
channels for the selected mode, or your favorite  
channels (if programmed – see Favorite Channel  
Scan on the previous page). Once Favorite  
Channel Scan has been set up under a mode,  
pressing the FAV SCAN key will only cycle  
through your favorite channel list in that mode.  
1. If Favorite Channel Scan has been set up, skip  
to step 2. Otherwise, press VCR, CBL, SAT, TV,  
or DVD once.  
2. Press FAV SCAN once.  
• If Favorite Channel Scan has been set up, the  
remote starts scanning the favorite channels  
and cycles through the list.  
• If Favorite Channel Scan has not been set up,  
scanning starts with the current channel, then  
proceeds to the next channel up, and continues  
until all channels of the selected device are  
scanned.  
3. To stop scanning channels at any time, press  
any key once.  
30 Using Channel Scan  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
THE LEARNING FEATURE  
The remote comes with a complete library of pre-  
programmed codes. After you have set up the  
remote for your device, you may find that there  
are one or more keys that you had on the original  
remote control, which do not have a place on your  
remote’s keypad.  
The remote includes a Learning Feature so you  
can add functions that are unique to your home  
entertainment devices (e.g.,VCR Tracking Up or  
Down). The custom keys (M1 – M4) have been  
provided for this feature. If you need to learn  
more than four functions per mode (max. approx-  
imately 25 functions), place the function on  
another key.  
However, there are some considerations:  
• Your original remote controls must be in work-  
ing order for the Learning Feature to work  
properly.  
• Learned keys are mode specific, so each one can  
store a unique function for each mode.  
• Learned keys can be used in Macros (see Using  
Macros on page 34).  
• You can use any key for learning, except device  
keys, P, SCREEN and FAV SCAN.  
• Once you program a key, the original function  
will be overwritten.  
• For optimum learning, avoid high levels of  
ambient light such as natural sunlight or energy-  
efficient fluorescent lights.  
NOTE: PLEASE HAVE YOUR ORIGINAL REMOTES AVAILABLE WHILE USING  
THE LEARNING FEATURE. BE SURE TO PRESS EACH KEY WITHIN 5 SEC-  
ONDS OF THE PREVIOUS ENTRY, OR THE REMOTE TIMES OUT, AND YOU  
MUST PRESS THE DESIRED KEY AGAIN.  
EXAMPLE: TO COPY THE “MONO/STEREO” FUNCTION  
FROM YOUR ORIGINAL TV REMOTE CONTROL ONTO THE  
M4 KEY OF YOUR REMOTE.  
1. Place the remote and your original remote con-  
trol on a flat surface. Make sure the ends that  
you normally point at your device are facing  
each other. Point the original remote to the  
front left side of the remote (see picture below).  
Keep the remotes at a distance of no more than  
1 to 2 inches apart.  
1 TO 2  
INCHES  
The Learning Feature 31  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
THE LEARNING FEATURE  
(CONTINUED)  
2. Hold down P on your remote for at least 3 sec-  
onds. The bottom of the IR Indicator blinks  
twice, and a circle appears around P.  
3. Press 9 7 5 on your remote. The bottom part of  
the IR Indicator blinks twice.  
4. Press the device key on the remote to select the  
mode to which you want to copy the learned  
function (Example: TV key).  
5. Press the key (Example: M4 key) on the remote  
where you want to place the learned function.  
Incoming IR blinks on and off three times on  
the IR indicator. Then the screen switches off.  
6. Hold down the original remote’s key (Example:  
mono/stereo key on your original remote con-  
trol) until your remote’s display switches back  
on. The IR Indicator blinks twice if it is learning  
successfully. A long blink indicates failure.  
7. If you want to copy other functions within the  
same mode, simply repeat steps 5 and 6, press-  
ing the next key you want to copy.  
8. To exit the learning mode, hold down P. The  
bottom part of IR Indicator blinks four times.  
• AS SOON AS THE DISPLAY SWITCHES OFF IN STEP 5, YOU NEED TO PRESS  
THE KEY ON YOUR ORIGINAL REMOTE WITHIN 5 SECONDS. OTHERWISE,  
THE REMOTE WILL EXIT THE LEARNING MODE.  
• AFTER 30 SECONDS OF INACTIVITY WHILE IN LEARNING MODE, THE  
REMOTE WILL RETURN TO USER MODE.  
• DURING LEARNING, KEYS SUCH AS (TV) MENU WILL NOT CHANGE  
SCREEN WHEN PRESSED.  
• IF YOU LEARN A FUNCTION ON ANOTHER KEY BESIDES M1, M2, M3, OR  
M4, THE ORIGINAL FUNCTION IS OVERWRITTEN.  
• IF YOU WANT TO LEARN A FUNCTION ON A KEY THAT IS NOT IN THE MAIN  
SCREEN, USE THE SCREEN KEY TO CHANGE THE SCREEN.  
• THE LEARNING FEATURE IS MODE SPECIFIC. THEREFORE YOU CAN PLACE  
ONE LEARNED FUNCTION PER MODE ON THE SAME KEY.  
• THE REMOTE CAN LEARN APPROXIMATELY 25 FUNCTIONS.  
• YOU CAN REPLACE A LEARNED FUNCTION BY PLACING ANOTHER  
LEARNED FUNCTION ON TOP.  
• LEARNING SHOULD NOT BE DONE IN DIRECT SUNLIGHT OR UNDER  
INCANDESCENT LIGHTS.  
• MAKE SURE YOU ARE USING NEW BATTERIES BEFORE FOLLOWING THE  
INSTRUCTIONS ABOVE.  
• UPON CHANGING THE BATTERIES, YOUR LEARNED FUNCTIONS WILL BE  
RETAINED.  
32 The Learning Feature  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
TO DELETE A LEARNED FUNCTION  
To de l e te a single learned function key, follow the  
steps below.  
1. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
2. Press 9 7 6. The bottom part of the IR Indicator  
blinks twice.  
3. Press the mode key (TV, VCR, etc.) that con-  
tains the key you wish to delete.  
4. Press the key that holds the function you wish  
to delete (M1, M2, etc.).  
5. Press the key again to confirm. The IR Indicator  
blinks twice.  
• THE ORIGINAL FUNCTIONS OF THE REMOTE ARE RESTORED.  
• IF THERE IS ANOTHER LEARNED FUNCTION YOU WANT TO DELETE,  
REPEAT STEPS 1 – 5.  
To delete a l l le ar ne d f u nctions within a certain  
mode  
TO DELETE ALL LEARNED FUNCTIONS WITHIN THE TV  
MODE  
1. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
2. Press 9 7 6. The bottom part of the IR Indicator  
blinks twice.  
3. Press the mode key for the device in which you  
want to delete all functions. Press it again to  
confirm. In our example, you would press TV  
twice. The IR Indicator blinks twice to confirm.  
The Learning Feature 33  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
USING MACROS  
MACROS  
Yo u c a n p r o g ram your remote to issue a sequence  
of commands at the press of one button. For  
example, you may want to turn off your TV,VCR,  
and Satellite at the same time. Any sequence of  
commands you regularly use can be reduced to  
one key press for your convenience. A key that is  
programmed with a Macro works through all  
modes (provided its available in that mode).  
Therefore a Macro should only be set on the  
Custom keys (M1 – M4).You can install a Macro  
on any key, except for the device keys (TV,VCR,  
SAT/CBL, CD, AUD, and DVD), P, SCREEN, and  
FAV SCAN.  
TO SET UP THE MACRO MENTIONED ABOVE ON THE KEY  
LABELED “M4” ON YOUR REMOTE:  
1. Hold down P for at least 3 seconds. The bottom  
of the IR Indicator blinks twice, and a circle  
appears around P.  
2. Press 9 9 5. The bottom of the IR Indicator  
blinks twice.  
3. Press M4. This is where your macro is assigned.  
4. Press TV, POWER,VCR, POWER, SAT,  
POWER.  
5. To store the Macro, hold down P for at least 3  
seconds. The bottom of the IR Indicator blinks  
twice.Whenever you press the M4 key, the  
remote will turn off your TV,VCR, and Satellite.  
• EACH MACRO CAN CONSIST OF A MAXIMUM OF 15 KEYSTROKES.  
• TO INCLUDE A FUNCTION FROM A PARTICULAR SCREEN IN A MODE, USE  
SCREEN.  
• MAKE SURE THAT YOU PROGRAM A MACRO ON A SPARE KEY THAT YOU  
DON’T USE IN ANY MODE.  
• MACROS PROGRAMMED ON SPECIFIC KEYS WORK REGARDLESS OF THE  
MODE (TV,VCR, SAT, CD, AUD, OR DVD). THE FUNCTION ORIGINAL-  
LY PROGRAMMED ON THAT SPECIFIC KEY IS OVERWRITTEN WHEN YOU  
PROGRAM A MACRO.  
• TO AVOID ACCIDENTAL RECORDINGS WITH THE REMOTE, YOU MUST PRESS  
RECORD TWICE TO BEGIN RECORDING. IF YOU ASSIGN A MACRO ON  
RECORD, THE DOUBLE KEY PRESS IS DEACTIVATED. THEREFORE WE  
RECOMMEND NOT ASSIGNING A MACRO ON THIS KEY.  
• IF YOU HAD TO HOLD DOWN A KEY FOR A FEW SECONDS ON THE ORIGI-  
NAL REMOTE CONTROL TO GET A FUNCTION, THIS FUNCTION MAY NOT  
WORK IN A MACRO ON YOUR REMOTE.  
34 Using Macros  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
TO ERASE A MACRO  
• To erase the Macro from M4, press:  
9 9 5  
*
*
(*) HOLD DOWN P FOR AT LEAST 3 SECONDS. THE BOTTOM OF THE IR  
INDICATOR BLINKS TWICE, AND A CIRCLE APPEARS AROUND P.  
Using Macros 35  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
REASSIGNING MODE KEYS  
Although you have six mode keys (TV,VCR, etc.),  
the remote can be set up to control a second TV,  
VCR, DVD player, or other device not listed on the  
device keys. The code for this device can be set up  
using Direct Code Set Up (p. 10) or Search  
Method (p. 12). To reassign a mode key, please fol-  
low the two examples below.  
THE DEVICE KEY ANIMATION LOOKS THE SAME WHEN THE MODE  
CHANGES.  
EXAMPLE 1: IF YOU WISH TO PROGRAM A SECOND TV ON  
THE DVD KEY.  
EXAMPLE 2: IF YOU WISH TO PROGRAM A SECOND VCR  
ON THE CD KEY.  
EXAMPLE 1:  
1. TO PROGRAM A SECOND TELEVISION ON DVD, PRESS:  
**  
9 9 2  
*
DVD IS NOW A SECOND TV KEY.  
2. ENTER THE DEVICE CODE FOR YOUR SECOND TV:  
_ _ _ _ (TV CODE) **  
*
EXAMPLE 2:  
TO PROGRAM A SECOND VCR ON CD, PRESS:  
**  
*
9 9 2  
THE CD KEY IS NOW A SECOND VCR KEY.  
2. ENTER THE DEVICE CODE FOR YOUR SECOND VCR:  
_ _ _ _ (VCR CODE)**  
*
(*) HOLD DOWN P FOR AT LEAST 3 SECONDS. THE BOTTOM OF THE IR  
INDICATOR BLINKS TWICE, AND A CIRCLE APPEARS AROUND P.  
(**) THE BOTTOM PART OF THE IR INDICATOR BLINKS TWICE.  
IF YOU PROGRAM A DIFFERENT DEVICE TYPE ON ANOTHER KEY (E.G., SEC-  
OND TV ON DVD) THE ORIGINAL DEVICE KEY ICON REMAINS, BUT THE  
FUNCTION CHANGES TO SUIT THE NEW DEVICE MODE. FOR EXAMPLE, IF A  
SECOND TV IS PROGRAMMED ON DVD, THE PIP KEYS ARE NOW AVAIL-  
ABLE.  
36 Reassigning Mode Keys  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
RESETTING A DEVICE KEY  
EXAMPLE: TO RESET DVD TO ITS ORIGINAL MODE, PRESS:  
**  
*
9 9 2  
(*) HOLD DOWN P FOR AT LEAST 3 SECONDS. THE BOTTOM OF THE IR  
INDICATOR BLINKS TWICE, AND A CIRCLE APPEARS AROUND P.  
(**) THE BOTTOM PART OF THE IR INDICATOR BLINKS TWICE.  
Reassigning Mode Keys 37  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
UPGRADING YOUR REMOTE  
Yo ur remote contains a unique feature that allows  
new codes to be added to its memory over the  
phone. In a matter of seconds, your remote quick-  
ly and reliably records the new information  
without complex plugs, adapters, or attachments.  
This means that as you buy new products the  
remote will never become obsolete. Simply call  
our consumer help-line at  
1-800-950-7044, and one of our customer service  
representatives will assist you through the entire  
process of upgrading your remote. To ensure the  
process goes smoothly, here are a few steps to fol-  
low:  
1. Write down the brand name(s) and model  
number(s) of your device(s) before you call.  
2. Next, call our consumer help-line and explain  
which device(s) you would like added to your  
remote.  
3. After our customer service agent records the  
brand name(s) and model number(s) of your  
device(s), he/she will lead you through the set  
up procedure and then will ask you to put the  
speaker portion of your telephone next to  
SCREEN on the remote (see diagram below). In  
doing this, the information needed for your  
device is transferred through the telephone into  
your remote in a matter of seconds.  
NOTE: CORDLESS TELEPHONES, SPEAKER TELEPHONES, AND MOBILE  
TELEPHONES ARE NOT RECOMMENDED.  
4. After your remote has been upgraded by tele-  
phone, stay on the line. Our customer service  
agent will ensure that your remote is working  
properly with your device(s) and answer any  
other questions you may have.  
38 Upgradeability  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Upgradeability 39  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
TROUBLESHOOTING  
Problem  
My brand is not listed on the Manufacturer’s Code  
list.  
The remote does not operate my device(s).  
I cannot find a working code using the  
instructions in “Search Method”.  
The remote is not performing commands properly.  
The remote does not change channels correctly.  
CH+, CH-, and LAST do not work on my RCA TV.  
VCR does not record.  
The remote does not respond after pressing a key.  
The IR Indicator does not show incoming or out-  
going IR.  
The remote turns on audio devices and controls  
volume, but does not change preset channels.  
My satellite receiver does not respond to the codes  
listed on page 51.  
IF YOU HAVE ANY OTHER PROBLEMS, SEE OUR WEBSITE AT  
WWW.RADIOSHACK.COM, VISIT YOUR LOCAL RADIOSHACK STORE, OR  
CALL CUSTOMER SERVICE AT 1-800-950-7044  
40 Troubleshooting  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Solution  
Tr y the “Search Method” on page 12.  
1. Try all the codes listed for your brand.  
2. Try the “Search Method” on page 12.  
See our website (www.radioshack.com) for help or  
take your remote to your local RadioShack store.  
Yo u may be using the wrong code. Try repeating  
the “Direct Code Set Up” procedure (page 10)  
using another code listed for your brand, or start  
the “Search Method” (page 12) over again to  
locate the proper code.  
Enter the channel number exactly as you would  
on your original remote. If the original remote  
control required Enter to be pressed to change  
channels, press ENTER on the remote after  
entering the channel number.  
Due to RCA design from 1983 to 1987, only the  
original remote control will operate these  
functions.  
As a safety feature on your remote, you must press  
RECORD twice.  
Make sure you are using new batteries and are  
aiming the remote at your device.  
Replace batteries with 4 new alkaline batteries.  
Some products may need both a Tuner (or  
Receiver) code and an Audio Amplifier code for  
remote control of all features on your audio  
device.  
Make sure the satellite receiver can be operated  
with an infrared (IR) remote control and is not set  
up to receive only radio frequency (RF) signals.  
Troubleshooting 41  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SPECIFICATIONS  
Remote Control Power  
Remote Control Dimensions  
(H x W x D)  
4 AAA Batteries  
9.38 x 2.79 x 0.69 in.  
238.3 x 70.8 x 6.9 mm  
(H x W x D)  
Remote Control Weight  
(without Batteries)  
0.36 lb (160 g)  
NOTE: SPECIFICATIONS ARE TYPICAL. INDIVIDUAL UNITS MIGHT VARY.  
SPECIFICATIONS ARE SUBJECT TO CHANGE AND IMPROVEMENT WITHOUT  
NOTICE.  
FCC STATEMENT  
This equipment has been tested and found to  
comply with the limits for a class B digital device,  
pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and if not  
installed and used in accordance with the instruc-  
tions, may cause harmful interference to radio  
communications. However, there is no guarantee  
that interfence will not occur in a particular  
installation. If this equipment does cuase harmful  
interfence to radio or television reception, which  
can be deteremined by turning the equipment off  
and on, the user is encouraged to try to correct  
the interfecnce by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment  
and receiver.  
• Connect the equipment into an outlet on a cir-  
cuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV  
technician for help.  
This equipment has been verified to comply with  
the limits for a class B computing device, pur-  
suant to FCC Rules. In order to maintain  
compliance with FCC regulations, shielded cables  
must be used with this equipment. Operation  
with non-approved equipment or unshielded  
cables is likely to result in interference to radio  
and TV reception. The user is cautioned that  
changes and modifications made to the equip-  
ment without the approval of manufacturer could  
void the user’s authority to operate this equipment.  
42 Specifications/FCC Statement  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
CARE  
Keep the remote dry; if it gets wet, wipe it dry  
immediately. Use and store the remote only in  
normal temperature environments. Handle the  
remote carefully; do not drop it. Keep the remote  
away from dust and dirt, and wipe it with a damp  
cloth occasionally to keep it looking new.  
If your remote is not performing as it should, take  
it to your local RadioShack store for assistance. To  
locate your nearest RadioShack, use the store  
locator feature on RadioShack's website  
(www.radioshack.com), or call 1-800-The Shack  
(843-7422) and follow the menu options.  
Modifying or tampering with the remote's inter-  
nal components can cause a malfunction and  
might invalidate its warranty and void your FCC  
authorization to operate it.  
Care 43  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
LIMITED 90-DAY WARRANTY  
This product is warranted by RadioShack against  
manufacturing defects in material and workman-  
ship under normal use for ninety (90) days from  
the date of purchase from RadioShack company-  
owned stores and authorized RadioShack  
franchisees and dealers.  
EXCEPT AS PROVIDED HEREIN, RadioShack  
MAKES NO EXPRESS WARRANTIES AND ANY  
IMPLIED WARRANTIES, INCLUDING THOSE OF  
MERCHANTABILITY AND FITNESS FOR A PAR-  
TICULAR PURPOSE, ARE LIMITED IN  
DURATION TO THE DURATION OF THE WRIT-  
TEN LIMITED WARRANTIES CONTAINED  
HEREIN. EXCEPT AS PROVIDED HEREIN,  
RadioShack SHALL HAVE NO LIABILITY OR  
RESPONSIBILITY TO CUSTOMER OR ANY  
OTHER PERSON OR ENTITY WITH RESPECT  
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED  
DIRECTLY OR INDIRECTLY BY USE OR PER-  
FORMANCE OF THE PRODUCT OR ARISING  
OUT OF ANY BREACH OF THIS WARRANTY,  
INCLUDING, BUT NOT LIMITED TO, ANY DAM-  
AGES RESULTING FROM INCONVENIENCE,  
LOSS OF TIME, DATA, PROPERTY, REVENUE, OR  
PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-  
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF  
RadioShack HAS BEEN ADVISED OF THE POSSI-  
BILITY OF SUCH DAMAGES.  
Some states do not allow limitations on how long  
an implied warranty lasts or the exclusion or limi-  
tation of incidental or consequential damages, so  
the above limitations or exclusions may not apply  
to you.  
In the event of a product defect during the warran-  
ty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any  
RadioShack store. RadioShack will, at its option,  
unless otherwise provided by law: (a) correct the  
defect by product repair without charge for parts  
and labor; (b) replace the product with one of the  
same or similar design; or (c) refund the purchase  
price. All replaced parts and products, and prod-  
ucts on which a refund is made, become the  
property of RadioShack. New or reconditioned  
parts and products may be used in the perform-  
ance of warranty service. Repaired or replaced  
parts and products are warranted for the remain-  
der of the original warranty period.You will be  
charged for repair or replacement of the product  
made after the expiration of the warranty period.  
44 Limited 90-day Warranty  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
This warranty does not cover: (a) damage or fail-  
ure caused by or attributable to acts of God,  
abuse, accident, misuse, improper or abnormal  
usage, failure to follow instructions, improper  
installation or maintenance, alteration, lightning  
or other incidence of excess voltage or current; (b)  
any repairs other than those provided by a  
RadioShack Authorized Service Facility; (c) con-  
sumables such as fuses or batteries; (d) cosmetic  
damage; (e) transportation, shipping or insurance  
costs; or (f ) costs of product removal, installa-  
tion, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and  
you may also have other rights, which vary from  
state to state.  
RadioShack Customer Relations,  
200 Taylor Street, 6th Floor,  
Fort Worth, TX 76102  
Cat. No. 15-2133  
12/02  
Fort Worth, Texas 76102  
Limited 90-day Warranty 45  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
MANUFACTURER’S CODES  
(CÓDIGOS DEL FABRICANTE)  
SETUP CODES FOR AUDIO AMPLIFIERS  
(CÓDIGOS DE CONFIGURACIÓN PARA AMPLIFI-  
CADORES DE AUDIO)  
Accuphase  
Carver  
0382  
0269  
Denon  
0160  
Harman/Kardon  
JVC  
0892  
0331  
Left Coast  
Linn  
0892  
0269, 0282  
0269  
0892, 0269  
0251  
0395, 0823  
0892, 0269  
0823  
Magnavox  
Marantz  
McIntosh  
Optimus  
Philips  
Pioneer  
Plasse Audio  
Polk Audio  
Proceed  
RCA  
0733  
0892, 0269  
1099  
0823  
Realistic  
Victor  
0395  
0331  
Ya maha  
0354  
SETUP CODES FOR AUDIO RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE AUDIO)  
ADC  
0531  
Admiral  
Aiwa  
0182  
1089, 1405, 0121, 1388  
Akai  
0115  
Alco  
1390  
Anam  
1074, 1609  
1257  
1189  
1390  
0701  
Apex Digital  
Audiotronic  
Audiovox  
B & K  
Bang & Olufsen  
Capetronic  
Carver  
1040  
0531, 0690  
1089, 1189, 0042, 0360  
0195  
Casio  
Clarinette  
Denon  
Fisher  
0195  
1104, 1160  
0042, 0219, 0360  
0744  
GPX  
Garrard  
Glory Horse  
Hanwah  
Harman/Kardon  
0440, 0744  
1263  
0741  
0891  
46 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
SETUP CODES FOR AUDIO RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE AUDIO)  
JBL  
1306  
JVC  
1263  
Jensen  
KLH  
0754  
1390  
Kansai  
Kenwood  
0440  
1313, 1027, 1570, 1569,  
0042, 0186  
Koss  
0744, 1366  
LXI  
0181, 0744  
Lexicon  
Lloyd's  
Luxman  
Magnavox  
1076  
0195  
0267  
1089, 1189, 0195, 0364,  
0531  
Marantz  
1089, 1189  
Memorex  
Modulaire  
Musicmagic  
NAD  
0335  
0195  
1089  
0320  
NTDE Geniesom  
Nakamichi  
Niles  
0744  
0347, 0876  
0413  
Onkyo  
0380, 1298  
Optimus  
1023, 0042, 0177, 0181,  
0186, 0219, 0440, 0531,  
0622, 0670, 0690, 0738,  
0744, 0754, 0797, 0801,  
0849, 1074  
Orient Power  
Panasonic  
Parasound  
Penney  
0744  
1518  
0895  
0195  
Philips  
Pioneer  
Proscan  
RCA  
1089, 1189, 1269  
1023, 0531, 1123  
1254  
1023, 1254, 0360, 0531,  
1074, 1122, 1123, 1390,  
1609  
RadioShack  
Realistic  
0744, 1263  
0001, 0025, 0163, 0178,  
0181, 0182, 0195, 0534  
0852  
Rotel  
Samsung  
Sansui  
1295  
1089  
Sanyo  
0219, 0801  
Schneider  
Scott  
0364  
0163, 0418  
Sharp  
0186  
Sherwood  
Sony  
Soundesign  
1653  
1058, 1258, 1158, 0415  
0670  
Manufacturer’s Codes 47  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR AUDIO RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE AUDIO)  
Stereophonics  
Sunfire  
1023  
1313  
Symphonic  
Te ac  
0182  
0163, 1074  
1308, 1309, 1518  
0364  
Te chnics  
Te chwood  
Thorens  
Ve nturer  
Ya maha  
Yo rx  
1189  
0849, 1390  
0176, 0186, 1176, 1276  
0195  
Zenith  
0622, 0744  
SETUP CODES FOR CABLE CONVERTERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
CONVERTIDORES DE CABLE)  
ABC  
Americast  
Archer  
0003, 0008, 0014  
0899  
0797  
Bell & Howell  
Bell South  
Director  
Emerson  
Gemini  
0014  
0899  
0476  
0797  
0797  
General Instrument 0476, 0003, 0276, 0810  
GoldStar  
Goodmind  
Jerrold  
0144  
0797  
0476, 0003, 0276, 0014,  
0810  
Memorex  
Motorola  
Pace  
0000  
0476, 1106, 0276, 0810  
0237  
Panasonic  
Paragon  
Philips  
0000, 0107  
0000  
0305, 0317  
Pioneer  
Pulsar  
0877, 0144, 0533, 1877  
0000  
Quasar  
0000  
RadioShack  
Runco  
0303, 0797, 0883  
0000  
Samsung  
Scientific Atlanta  
Sony  
0144  
0877, 0008, 0477, 1877  
1006  
Starcom  
Stargate  
Supercable  
Torx  
0003  
0797  
0276  
0003  
Toshiba  
ViewMaster  
Zenith  
0000  
0883  
0000, 0525, 0899  
48 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
SETUP CODES FOR CD PLAYERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
REPRODUCTORES DE CDS)  
Burmester  
Classic  
DKK  
0420  
1297  
0000  
Denon  
GPX  
0873  
1296  
Garrard  
Genexxa  
Hitachi  
JVC  
0420  
0032  
0032  
0072, 1294  
KLH  
1318  
Kenwood  
0681, 0826, 0626, 0028,  
0190  
Koss  
1317  
MTC  
0420  
Marantz  
Miro  
0626  
0000  
Onkyo  
Optimus  
0868  
1063, 0000, 0032, 0420,  
0468, 0536, 0850, 1075  
Parasound  
Philips  
Pioneer  
RCA  
0420  
0626  
1063, 1062, 0032, 0468  
1062, 0032, 0053, 0468  
RadioShack  
Realistic  
Rotel  
1075, 1083  
0420  
0420  
Sharp  
0861  
Sherwood  
Sony  
TDK  
1067  
0490, 0000, 0100  
1208  
Tascam  
Te ac  
0420  
0420  
Victor  
0072  
Wards  
0053  
Ya maha  
0888  
SETUP CODES FOR DVD PLAYERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
REPRODUCTORES DVD)  
Apex Digital  
0672, 0717, 0755, 0794,  
0795, 0796, 0797, 0830  
Blue Parade  
Broksonic  
Denon  
0571  
0695  
0490  
Emerson  
Enterprise  
Fisher  
0591  
0591  
0670  
GE  
0522, 0717, 0815  
Manufacturer’s Codes 49  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR DVD PLAYERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
REPRODUCTORES DVD)  
Go Video  
Gradiente  
Greenhill  
Hitachi  
Hiteker  
InterAct  
JVC  
0715, 0783  
0651  
0717  
0573, 0664  
0672  
0697  
0558, 0623, 0867  
0717  
KLH  
Kenwood  
Konka  
0534, 0682  
0719  
Koss  
0651  
Lasonic  
Magnavox  
Marantz  
Microsoft  
Mitsubishi  
Onkyo  
0798  
0503, 0675  
0539  
0522  
0521  
0503  
Oritron  
Panasonic  
0651  
0490, 0632, 0677  
Pelican Accessories 0731  
Philips  
Pioneer  
Proscan  
RCA  
0503, 0539, 0854  
0525, 0571, 0632  
0522  
0522, 0571, 0717, 0822,  
1022  
Rowa  
0823  
Saitek  
0731  
Samsung  
Sansui  
0573, 0820  
0695  
Sanyo  
0670  
Sharp  
0630  
Sony  
0533, 0772  
0821  
0490  
0571  
0498  
Sylvania  
Te chnics  
Theta Digital  
Thrustmaster  
Toshiba  
Tredex  
0503, 0695, 1045  
0800  
Urban Concepts  
Ya maha  
Zenith  
0503  
0490, 0545  
0503, 0591  
SETUP CODES FOR HOME AUTOMATION  
(CÓDIGOS DE CONFIGURACIÓN PARA LA  
AUTOMATIZACIÓN DEL HOGAR)  
GE  
0240  
0167  
0240  
0167  
0167  
0167  
One For All  
RadioShack  
Security System  
Universal X10  
X10  
50 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
SETUP CODES FOR HOME-THEATER-IN-A-BOX  
DEVICES  
(CÓDIGOS DE CONFIGURACIÓN PARA  
DISPOSITIVOS HOME-THEATER-IN-A-BOX)  
Aiwa  
1388  
Alco  
1390  
Anam  
Apex Digital  
Audiovox  
JBL  
1609  
1257  
1390  
1306  
KLH  
1390  
Koss  
1366  
Onkyo  
RCA  
Samsung  
Ve nturer  
1298  
1390, 1609  
1295  
1390  
SETUP CODES FOR SATELLITE RECEIVERS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
RECEPTORES DE SATÉLITE)  
AlphaStar  
Crossdigital  
Echostar  
Expressvu  
GE  
0772  
1109  
1005, 0775  
0775  
0566  
GOI  
0775  
General Instrument 0869  
HTS  
Hitachi  
0775  
0819  
Hughes Network  
Systems  
JVC  
1142, 0749, 1749  
0775  
Magnavox  
Memorex  
Mitsubishi  
Motorola  
Next Level  
Panasonic  
Paysat  
0724, 0722  
0724  
0749  
0869  
0869  
0701  
0724  
Philips  
1142, 0749, 0724, 1076,  
0722  
Proscan  
RCA  
0392  
0392, 0566, 0855, 0143  
RadioShack  
Samsung  
Sony  
0869  
1109  
0639  
Star Choice  
Toshiba  
Uniden  
Zenith  
0869  
0749, 0790, 1749  
0724, 0722  
0856  
Manufacturer’s Codes 51  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR TVS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
TELEVISORES)  
A-Mark  
AOC  
0003  
0030, 0019, 0003  
Abex  
0032  
Admiral  
Advent  
Aiko  
0093, 0463  
0761  
0092  
Aiwa  
0701  
Akai  
0030  
Alaron  
America Action  
Ampro  
Anam  
0179  
0180  
0751  
0180  
Apex Digital  
Archer  
Audiovox  
0748, 0765, 0767  
0003  
0451, 0180, 0003, 0092,  
0623  
Baysonic  
Belcor  
0180  
0019  
Bell & Howell  
Bradford  
Brockwood  
Broksonic  
CXC  
0154, 0016  
0180  
0019  
0236, 0463, 0003  
0180  
Candle  
0030, 0056  
Carnivale  
Carver  
0030  
0054  
Celebrity  
Changhong  
Cineral  
0000  
0765  
0451, 0092  
Citizen  
0060, 0030, 0056, 0039,  
0092  
Concerto  
Contec  
0056  
0180  
Craig  
0180  
Crosley  
0054  
Crown  
0180, 0039  
Curtis Mathes  
0047, 0054, 0154, 0051,  
0451, 0093, 0060, 0030,  
0145, 0056, 0016, 0039,  
0166, 0466, 0702, 1147,  
1347  
Daewoo  
0451, 0019, 0039, 0092,  
0623, 0624  
Daytron  
Denon  
0019  
0145  
Dumont  
Dwin  
0017, 0019  
0720, 0774  
Electroband  
0000  
52 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Electrohome  
Emerson  
0409  
0154, 0236, 0463, 0180,  
0178, 0019, 0179, 0039,  
0623, 0624  
Envision  
Fisher  
0030  
0154  
Fujitsu  
Funai  
0179, 0683  
0180, 0179, 0171  
Futuretech  
GE  
0180  
0047, 0051, 0451, 0093,  
0178, 0021, 1147, 1347  
Gibralter  
GoldStar  
0017, 0030, 0019  
0030, 0178, 0019, 0056,  
0032, 0409  
Gradiente  
Grunpy  
0053, 0056  
0180, 0179  
Hallmark  
0178  
Harley Davidson  
Harman/Kardon  
Harvard  
0179  
0054  
0180  
Havermy  
0093  
Hitachi  
0145, 0056, 0016, 0032,  
0409  
Infinity  
Inteq  
JBL  
0054  
0017  
0054  
JCB  
0000  
JVC  
0053  
KEC  
0180  
KTV  
Kenwood  
Konka  
0180, 0030, 0039  
0030, 0019  
0628, 0632, 0638, 0703,  
0707  
LG  
0056  
LXI  
0047, 0054, 0154, 0156,  
0178  
Logik  
0016  
Luxman  
MGA  
MTC  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
0056  
0150, 0030, 0178, 0019  
0060, 0030, 0019, 0056  
0054, 0030, 0179, 1254  
0016  
0054, 0030  
0250  
0178, 0145, 0003  
0154, 0250, 0463, 0150,  
0178, 0179, 0056, 0016  
0047, 0017, 0051, 0039,  
0032  
Midland  
Minutz  
0021  
Mitsubishi  
Motorola  
Multitech  
0093, 0150, 0178, 0019  
0093  
0180  
Manufacturer’s Codes 53  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR TVS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
TELEVISORES)  
NAD  
NEC  
NTC  
0156, 0178, 0166  
0030, 0019, 0056  
0092  
Nikko  
Onwa  
0030, 0178, 0092  
0180  
Optimus  
Optonica  
Orion  
Panasonic  
Penney  
0154, 0250, 0166  
0093, 0165  
0236, 0463, 0179  
0250, 0051  
0047, 0156, 0051, 0060,  
0030, 0178, 0021, 0019,  
0056, 0039, 0003, 0032,  
1347  
Philco  
0054, 0463, 0030, 0145,  
0019  
Philips  
Pilot  
Pioneer  
Portland  
Princeton  
Prism  
0054  
0030, 0019, 0039  
0166, 0679  
0019, 0039, 0092  
0717  
0051  
Proscan  
Proton  
Pulsar  
Quasar  
RCA  
0047  
0178, 0003, 0466  
0017, 0019  
0250, 0051, 0165  
0047, 0051, 0093, 0019,  
0090, 0679, 1047, 1147,  
1247, 1347, 1447, 1547  
0047, 0154, 0165, 0180,  
0030, 0178, 0019, 0056,  
0039, 0032, 0409  
0154, 0165, 0180, 0030,  
0178, 0019, 0056, 0039,  
0032  
RadioShack  
Realistic  
Runco  
SSS  
0017, 0030, 0603  
0180, 0019  
Sampo  
Samsung  
0030, 0039, 0032  
0060, 0030, 0178, 0019,  
0056, 0032, 0702, 0766  
0039  
0451  
0463  
Samsux  
Sansei  
Sansui  
Sanyo  
0154  
Scimitsu  
Scotch  
Scott  
0019  
0178  
0236, 0180, 0178, 0019,  
0179  
Sears  
0047, 0054, 0154, 0156,  
0178, 0179, 0056, 0171  
0180  
Semivox  
Semp  
0156  
54 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Sharp  
0093, 0165, 0039, 0688,  
0689  
Shogun  
0019  
Signature  
Sony  
Soundesign  
Spectricon  
Squareview  
Starlite  
0016  
0000, 1100  
0180, 0178, 0179  
0003  
0171  
0180  
Supreme  
Sylvania  
Symphonic  
TMK  
0000  
0054, 0030, 0171  
0180, 0171  
0178, 0056  
0017  
TNCi  
Tandy  
0093  
Tatung  
0003  
Te chnics  
Te chnol Ace  
Te chwood  
Te k nika  
0250, 0051  
0179  
0051, 0056, 0003  
0054, 0180, 0150, 0060,  
0019, 0179, 0056, 0016,  
0039, 0092  
0056, 0702  
0154, 0156, 0060, 1256  
0039  
Te lefunken  
Toshiba  
Totevision  
Ve ctor Research  
Victor  
0030  
0053  
Vidikron  
Vidtech  
Wards  
0054  
0178, 0019  
0054, 0165, 0030, 0178,  
0021, 0019, 0179, 0056,  
0016  
Waycon  
0156  
White Westinghouse 0463, 0623, 0624  
Ya maha  
Zenith  
0030, 0019  
0017, 0463, 0016, 0092,  
0624  
0003  
Zonda  
SETUP CODES FOR TV/VCR COMBOS  
(CÓDIGOS DE CONFIGURACIÓN PARA APARATOS  
COMBINADOS TELEVISOR/VIDEOGRABADORA)  
Broksonic  
Citizen  
0002, 1479  
0278, 1278  
Colt  
0072  
Curtis Mathes  
Daewoo  
Emerson  
Funai  
1035  
1278  
0002, 1278, 1479  
0000  
GE  
0807, 0240, 1035, 1060  
Goldstar  
Harley Davidson  
Hitachi  
1237  
0000  
0000  
0067  
JVC  
Manufacturer’s Codes 55  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR TV/VCR COMBOS  
(CÓDIGOS DE CONFIGURACIÓN PARA APARATOS  
COMBINADOS TELEVISOR/VIDEOGRABADORA)  
Lloyd's  
0000  
Magnasonic  
Magnavox  
Magnin  
0278, 0593, 1278  
0000, 1781  
0240  
Memorex  
0037, 0454, 1037, 1162,  
1237, 1262  
0240  
MGA  
Mitsubishi  
Optimus  
Orion  
Panasonic  
Penney  
Quasar  
RCA  
RadioShack  
Sansui  
Sanyo  
0807  
0454, 0593, 1162, 1262  
0002, 1479  
1035, 1162, 1262, 1362  
0240, 1035, 1237  
1035, 1162  
0807, 0240, 1035, 1060  
1037  
0000, 1479  
0240  
Sears  
Sharp  
0000, 1237  
0807  
Sony  
0000, 1232  
1781  
0000, 0593  
0000  
Sylvania  
Symphonic  
Thomas  
Toshiba  
0845  
White Westinghouse 1278  
Zenith  
0000, 1479  
SETUP CODES FOR VCRS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
VIDEOGRABADORAS)  
Admiral  
0048, 0209  
Adventura  
Aiko  
0000  
0278  
Aiwa  
0037, 0000, 0307  
Akai  
0041  
America Action  
American High  
Asha  
0278  
0035  
0240  
Audiovox  
Beaumark  
Bell & Howell  
Broksonic  
0037  
0240  
0104  
0184, 0121, 0209, 0002,  
0479, 1479  
0072, 0278  
0037  
CCE  
Calix  
Canon  
Carver  
Cineral  
Citizen  
Colt  
0035  
0081  
0278  
0037, 0278, 1278  
0072  
Craig  
0037, 0047, 0240, 0072  
56 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Curtis Mathes  
0060, 0035, 0162, 0041,  
1035  
Cybernex  
Daewoo  
0240  
0045, 0278, 1278  
Denon  
0042  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
0000  
0037  
0037  
0032  
Emerson  
0037, 0184, 0000, 0121,  
0043, 0209, 0002, 0278,  
0479, 1278, 1479  
0047, 0104, 0066  
0035, 0033  
Fisher  
Fuji  
Funai  
GE  
0000  
0060, 0035, 0048, 0240,  
0202, 0807, 1035, 1060  
0000  
Garrard  
Go Video  
GoldStar  
Gradiente  
HI-Q  
0432  
0037, 0038, 0480, 1237  
0000  
0047  
Harley Davidson  
Harman/Kardon  
Harwood  
Headquarter  
Hitachi  
0000  
0081, 0038  
0072  
0046  
0000, 0042, 0041  
Hughes Network  
Systems  
JVC  
0042  
0067, 0041  
Jensen  
0041  
KEC  
0037, 0278  
KLH  
0072  
Kenwood  
Kodak  
0067, 0041, 0038  
0035, 0037  
LXI  
0037  
Lloyd's  
0000  
Logik  
0072  
MEI  
0035  
MGA  
0240, 0043  
MGN Technology  
MTC  
0240  
0240, 0000  
Magnasonic  
Magnavox  
0278, 0593, 1278  
0035, 0039, 0081, 0000,  
0149, 0563, 1781  
0240  
0035, 0081  
0037  
Magnin  
Marantz  
Marta  
Matsushita  
Memorex  
0035, 0162, 0454  
0035, 0162, 0037, 0048,  
0039, 0047, 0240, 0000,  
0104, 0209, 0046, 0268,  
0299, 0307, 0454, 0479,  
1037, 1162, 1237, 1262  
0042  
Minolta  
Manufacturer’s Codes 57  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR VCRS  
(CÓDIGOS DE CONFIGURACIÓN PARA  
VIDEOGRABADORAS)  
Mitsubishi  
Motorola  
Multitech  
NAD  
0048, 0067, 0043, 0807  
0035, 0048  
0000, 0072  
0058  
NEC  
Nikko  
0104, 0067, 0041, 0038  
0037  
Noblex  
0240  
Olympus  
Optimus  
0035  
1062, 0162, 0037, 0048,  
0104, 0058, 0432, 0454,  
0568, 0593, 0619, 1048,  
1162, 1262  
Optonica  
Orion  
0062  
0184, 0209, 0002, 0479,  
1479  
Panasonic  
Penney  
1062, 0035, 0162, 0225,  
0454, 0616, 1035, 1162,  
1262, 1362  
0035, 0037, 0240, 0042,  
0038, 1035, 1237  
0042  
0035, 0209, 0479  
0035, 0081, 0062, 0618,  
1081, 1181  
Pentax  
Philco  
Philips  
Pilot  
0037  
Pioneer  
Polk Audio  
Profitronic  
Proscan  
Protec  
0067, 0058  
0081  
0240  
0060, 0202, 1060  
0072  
Pulsar  
0039  
Quarter  
Quartz  
0046  
0046  
Quasar  
0035, 0162, 0454, 1035,  
1162  
RCA  
0060, 0035, 0048, 0240,  
0042, 0149, 0058, 0202,  
0619, 0807, 1035, 1060  
0000, 1037  
RadioShack  
Radix  
0037  
Randex  
0037  
Realistic  
0035, 0037, 0048, 0047,  
0000, 0104, 0062, 0046,  
0066  
ReplayTV  
Runco  
0614, 0616  
0039  
STS  
0042  
Samsung  
Sanky  
0240, 0045  
0048, 0039  
58 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
Sansui  
Sanyo  
0000, 0067, 0209, 0041,  
0479, 1479  
0047, 0240, 0104, 0046,  
0268  
Scott  
Sears  
0184, 0045, 0121, 0043  
0035, 0037, 0047, 0000,  
0042, 0104, 0046, 0066,  
1237  
Semp  
0045  
Sharp  
0048, 0062, 0807, 0848  
Shintom  
Shogun  
Singer  
0072  
0240  
0072  
Sonic Blue  
Sony  
0614  
0035, 0032, 0000, 0033,  
0636, 1032, 1232  
0035, 0081, 0000, 0043,  
1781  
Sylvania  
Symphonic  
TMK  
0000, 0593  
0240  
Tatung  
0041  
Te ac  
Te chnics  
Te k nika  
Thomas  
Tivo  
Toshiba  
0000, 0041  
0035, 0162  
0035, 0037, 0000  
0000  
0618, 0636  
0045, 0043, 0066, 0845  
0037, 0240  
0240  
Totevision  
Unitech  
Ve ctor  
0045  
Ve ctor Research  
Video Concepts  
Videomagic  
Videosonic  
Villain  
0038  
0045  
0037  
0240  
0000  
Wards  
0060, 0035, 0048, 0047,  
0081, 0240, 0000, 0042,  
0072, 0149, 0062  
White Westinghouse 0209, 0072, 0278, 1278  
XR-1000  
Ya maha  
Zenith  
0035, 0000, 0072  
0038  
0039, 0000, 0209, 0033,  
0479, 1479  
Manufacturer’s Codes 59  
oad from Www.Somanuals.com. All Manuals Search And Dow  
6-IN-ONE  
SETUP CODES FOR TV/DVD COMBOS  
(CÓDIGOS DE CONFIGURACIÓN PARA APARATOS  
COMBINADOS TELEVISOR/REPRODUCTORES DVD)  
Broksonic  
Konka  
0695  
0719  
Philips  
RCA  
0854  
1022  
Sharp  
0630  
Sylvania  
Toshiba  
0821  
0695, 1045  
SETUP CODES FOR PVRS  
(CÓDIGOS DE CONFIGURACIÓN PARA VIDEO  
GRABADORA PERSONAL)  
Panasonic  
Philips  
0616  
0618  
ReplayTV  
Sonic Blue  
Sony  
0614, 0616  
0614, 0616  
0636  
Tivo  
0618, 0636  
SETUP CODES FOR XBOX  
(CÓDIGOS DE CONFIGURACIÓN PARA XBOX)  
Microsoft  
XBox  
0522  
0522  
SETUP CODES FOR PLAYSTATION2  
(CÓDIGOS DE CONFIGURACIÓN PARA  
PLAYSTATION2)  
InterAct  
0697  
Pelican Accessories 0731  
Saitek  
0731  
Sony  
Thrustmaster  
0533, 0772  
0498  
60 Manufacturer’s Codes  
oad from Www.Somanuals.com. All Manuals Search And Dow  
USER’S GUIDE  
This product uses technologies licensed under  
one or more of the following U.S. patents:  
4,959,810 5,228,077 5,255,313  
5,414,761 5,552,917 5,537,463  
5,959,751 5,481,256 5,515,052  
6,014,092 6,195,033 6,097,309  
6,330,091  
Manufacturer’s Codes 61  
oad from Www.Somanuals.com. All Manuals Search And Dow  
05A03  
oad from Www.Somanuals.com. All Manuals Search And Dow  

Quantum Audio Network Router FC420 User Guide
RAD Data comm IP Phone Vmux 2100 User Guide
Radio Shack Telephone System 350 User Guide
RCA Home Theater System RTDVD1 User Guide
RedMax Brush Cutter BC2300DL User Guide
Renesas Computer Monitor R61509V User Guide
Runco Flat Panel Television dtv 992 992 ultra User Guide
Samsung Security Camera SNC C7478CP User Guide
Sanyo Projector PLC SU07N User Guide
Scotts Bicycle ZX 10R 2004 05 User Guide