H8/36037, H8/36057 Group Expansion I/O Board
for E6000 Emulator
HS36037EIO61H User’s Manual
Renesas Microcomputer Development Environment System
H8 Family / H8/300H Tiny Series
Rev.1.00
200D3o.w1nl2oa.d1fr9om Www.Somanuals.com. All Manuals Search And Download.
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them.
Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the
Renesas Technology Corp. product best suited to the customer's application; they do not
convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of these
materials, and are subject to change by Renesas Technology Corp. without notice due to
product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for
the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss
rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various
means, including the Renesas Technology Corp. Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products.
Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a
device or system that is used under circumstances in which human life is potentially at stake.
Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product
distributor when considering the use of a product contained herein for any specific purposes,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or
undersea repeater use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they
must be exported under a license from the Japanese government and cannot be imported into a
country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or
the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products
contained therein.
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following
products produced only by Renesas Technology Corp. excluding all subsidiary products.
•
•
•
•
E6000 series emulator station
Expansion I/O board
User system interface cables
PC interface board
The user system or a host computer is not included in this definition.
Purpose of the Expansion I/O Board:
This expansion I/O board is installed in the E6000 emulator, and enables the emulator station to be
connected to the user system interface cable. This expansion I/O board must only be used for the
above purpose.
Improvement Policy:
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as
Renesas) pursues a policy of continuing improvement in design, functions, performance, and
safety of the emulator product. Renesas reserves the right to change, wholly or partially, the
specifications, design, user's manual, and other documentation at any time without notice.
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
I
LIMITED WARRANTY
Renesas warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material and/or workmanship. Renesas, at its option, will repair or
replace any emulator products returned intact to the factory,
transportation charges prepaid, which Renesas, upon inspection,
determine to be defective in material and/or workmanship. The foregoing
shall constitute the sole remedy for any breach of Renesas's warranty.
See the Renesas warranty booklet for details on the warranty period. This
warranty extends only to you, the original Purchaser. It is not transferable
to anyone who subsequently purchases the emulator product from you.
Renesas is not liable for any claim made by a third party or made by you
for a third party.
DISCLAIMER
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED
FROM THE EMULATOR PRODUCT.
II
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Renesas shall have no liability or legal responsibility for any problems caused by misuse,
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the
emulator product without Renesas's prior written consent or any problems caused by the user
system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by
Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in
hard-copy or machine-readable form, by any means available without Renesas's prior written
consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Renesas's semiconductor products. Renesas assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Renesas.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Renesas cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the emulator product are therefore not all inclusive.
Therefore, you must use the emulator product safely at your own risk.
III
SAFETY PAGE
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
NOTE
emphasizes essential information.
IV
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the E6000 emulator and user system
before connecting or disconnecting any CABLES or
PARTS.
3. Always before connecting any CABLES, make sure that
pin 1 on both sides are correctly aligned.
4. Supply power according to the power specifications and
do not apply an incorrect power voltage. Use only the
provided power cable.
V
Preface
Thank you for purchasing this H8/36037 series, H8/36057 series expansion I/O board
(HS36037EIO61H; hereinafter referred to as the expansion I/O board) for the H8 series E6000
emulator.
The expansion I/O board enables user systems for Renesas's original microcomputer H8/36037
series, H8/36057 series to be developed using an H8/3664 series E6000 emulator
(HS3664EPI61H; hereinafter referred to as the emulator).
i
Contents
Section 1 Overview ..........................................................................................1
1.1 Environment Conditions....................................................................................................1
1.2 Supported MCUs and User System Interface Cables........................................................2
1.3 Operating Voltage and Frequency Specifications .............................................................3
1.4 Components ......................................................................................................................4
Section 2 Connection Procedures......................................................................5
2.1 Using Emulator without Connecting User System ............................................................5
2.2 Using Emulator with Connecting User System through User System Interface Cable......6
Section 3 User System Interface........................................................................8
Section 4 Notice.................................................................................................9
ii
Section 1 Overview
The H8/36037 series, H8/36057 series E6000 expansion I/O board (hereinafter referred to as the
expansion I/O board) is an efficient software and hardware development support tool for
application systems using Renesas's original microcomputers H8/36037 series, H8/36057 series
HCAN interface.
The expansion I/O board should be used with H8/3664 series E6000 emulator station
(HS3664EPI61H: hereinafter referred to as the emulator).
1.1
Environment Conditions
Table 1.1 Environment Conditions
Item
Specifications
Temperature
Operating: +10 to +35°C
Storage: –10 to +50°C
Humidity
Operating: 35 to 80% RH; no condensation
Storage: 35 to 80% RH; no condensation
No corrosive gases
Ambient gases
Power supply
Power supply from E6000 emulator station
Depends on the MCU within the range 3.0 V to 5.5 V
User system voltage (UVcc)
1
1.2
Supported MCUs and User System Interface Cables
Table 1.2 shows the correspondence between the MCUs and the user system interface cables
supported by the E6000.
H8/36037 Series, H8/36057 Series:
Table 1.2 H8/36037 Series, H8/36057 Series MCUs and User System Interface Cable
MCU Type
No.
Number
Package
E6000 User System Interface Cables
HS3687ECH61H
1
HD64F36057
HD64F36054
HD64336057
HD64336054
HD64F36037
HD64F36034
HD64336037
HD64336034
64-pin LQFP(FP-64E)
64-pin QFP(FP-64A)
HS3687ECH62H
2
1.3
Operating Voltage and Frequency Specifications
Table 1.3 shows the MCU operating voltage and frequency specifications supported by the E6000.
If the E6000 is used in an environment that exceeds the operating voltage range and operating
frequency range guaranteed for the MCU operation, normal emulator operation is not guaranteed.
Table 1.3 Operating Voltage and Frequency Specifications
Operating Frequency
No.
MCU Types
Operating Voltage (V)
3.0-5.5
(φ) (MHz)
2-10
1
H8/36037 Series
H8/36057 Series
4.0-5.5
2-20
NOTE
For details on the operating voltage and frequency
specifications, refer to the MCU hardware manual.
3
1.4
Components
Figure 1.1 shows the HS36037EIO61H expansion I/O board appearance, and table 1.4 lists the
components of the expansion I/O board. Please make sure you have all of these components when
unpacking.
E 6 0 0 0
Figure 1.1 HS36037EIO61H Expansion I/O Board
Table 1.4 HS36037EIO61H Components
No. Component
Quantity
Remarks
1
2
HS36037EIO61H
Documentation
1
1
Expansion I/O board
User’s manual for HS36037EIO61H (this
manual)
4
Section 2 Connection Procedures
WARNING
Always switch OFF the user system and the emulator
product before the EXPANSION I/O BOARD or USER
SYSTEM INTERFACE CABLE is connected to or removed
from any part. Before connecting, make sure that pin 1 on
each side is correctly aligned. Failure to do so will result in
a FIRE HAZARD and will damage the user system, the
emulator product, the user system interface cable, and the
expansion board, or will result in PERSONAL INJURY. The
USER PROGRAM will be LOST.
2.1
Using Emulator without Connecting User System
1. Make sure the emulator is turned off.
2. After making sure the direction of the expansion I/O board connector labeled E6000
EMULATOR is correct, firmly insert the expansion I/O board connector into the emulator
station connector. When the emulator is operated while connected to only the expansion I/O
board (without connecting the user system), disconnect the cable body from the expansion I/O
board.
5
2.2
Using Emulator with Connecting User System through User System
Interface Cable
CAUTION
When connecting or removing the user system interface
cable, apply force only in the direction suitable for
connection or removal, while making sure not to bend or
twist the cable or connectors.
Otherwise, the cables or connectors will be damaged.
1. Make sure the emulator and the user system are turned off.
2. [1] After making sure the direction of the expansion I/O board connector labeled E6000
EMULATOR is correct, firmly insert the expansion I/O board connector into the emulator
station connector ([1] in figure 2.1).
[2] To connect the expansion I/O board labeled USER INTERFACE CABLE and the user
system interface cable body.
6
Emulator station
E 6 0 0 0
[1]
Expansion I/O board
E 6 0 0 0
[2]
Cable body connector
CTS screws (M3 x 6 mm)
User system interface cable
Figure 2.1 Connecting Expansion I/O Board to Emulator Station and
User System Interface Cable
7
Section 3 User System Interface
Switches, protection circuits, and termination circuits are provided for the H8/36037 HCAN
interface of the expansion I/O board. Signals are connected to the user system interface cable with
the protection circuit. Figure 3.1 shows user system interface circuit.
E6000 (HS3664EPI61H)
HS36037EIO61H
Vcc
47 kΩ
H8/3664
H8/36037
Evaluation chip
47 Ω
User system
interface cable
Port 9
Figure 3.1 User System Interface Circuit (Port 9)
8
Section 4 Notice
WARNING
Observe the precautions listed below. Failure to do so will
result in a FIRE HAZARD and will damage the user system
and the emulator product or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
1. This expansion I/O board is specifically designed for the
HS3664EPI61H. Do not use this expansion I/O board
with any other emulator station.
2. Use the H8/3687, H8/36037 and H8/36057 series user
system interface cable (HS3687ECH61H for FP-64E or
HS3687ECH62H for FP-64A).
Do not use any otherseries of user system interface
cable.
1. Do not place heavy objects on the expansion I/O board.
2. Power is supplied from the emulator station to the expansion I/O board.
9
H8/36037, H8/36057 Group
Expansion I/O Board for E6000 Emulator
User’s Manual
REJ10B0096-0100H
|