Roland Electronic Keyboard AT 60S User Guide

®ÂØÒňή  
AT-60S  
TurboStart  
Atelier organ  
Note: To hear only the SYMPHONIC tone, press the  
selected tone button (indicator lit) under ORGAN in  
the UPPER section until its indicator is not lit.  
It’s a Fact…  
The AT-60S is part of Roland’s Atelier® S-Series  
home organs. Building on the popular R-Series, the  
AT-60S includes:  
4. Press a tone button (e.g. Piano, A. Guitar, Brass,  
etc.) under ORCHESTRAL in the UPPER  
section to hear three tones simultaneously.  
5. To select a tone on the lower keyboard, repeat  
steps 1–4, substituting the word LOWER for the  
word UPPER.  
240 CD-quality GM2/©sounds  
16 drum sets, 1 SFX Set  
128-note polyphony  
56-key velocity-sensitive upper-keyboard, 76-key  
velocity-sensitive lower-keyboard, 20 pedals  
130 preset music styles (6 overwriteable)  
8 programmable registrations  
7-track recorder with built-in metronome  
Rotary Sound, Reverb, Chorus, Vibrato  
Built-in 3.5” floppy disk drive  
Refer to the Owner’s Manual, pp. 34–37 for more  
information.  
Selecting Music Styles  
Use the following procedure to select a Music Style  
from internal memory:  
Touch screen with SMF lyric display  
Intializing—Restoring Factory  
Settings  
1. Press a rhythm button (e.g. Ballad, Latin,  
Acoustic etc.) in the RHYTHM section (located  
on the left side of the organ.)  
2. Touch a MUSIC STYLE on the screen.  
Use the following procedure to clear the internal  
memory and reload the factory settings:  
Note: You will see 8 Music Styles on the screen;  
touch [t] or [u] on the screen to see additional  
Music Styles.  
Caution: All USER information will be lost. Be sure to  
back up any information you wish to keep.  
1. Make sure there is no floppy disk in the drive.  
2. Turn off the power.  
3. Press the START/STOP button (located to the  
left of the upper keyboard) to play the MUSIC  
STYLE; press the START/STOP button again to  
silence the organ.  
3. While holding down the ONE TOUCH  
PROGRAM button, turn on the power.  
4. Release the ONE TOUCH PROGRAM button  
when the screen reads: “Factory Preset is  
Loaded.”  
Refer to the Owner’s Manual, pp. 57–58 for more  
information.  
Refer to the Owner’s Manual, pg. 23 for more  
information.  
Use the following procedure to select a Music Style  
from disk:  
1. Press the DISK button in the RHYTHM section.  
2. Insert a compatible Music Styles Disk (i.e. MSA,  
MSE, or MSD) into the drive.  
Selecting Tones  
3. Touch a MUSIC STYLE on the screen.  
4. Press the START/STOP button (located to the  
left of the upper keyboard) to play the MUSIC  
STYLE; press the START/STOP button again to  
silence the organ.  
Use the following procedure to select a tone on the  
upper keyboard:  
1. Press a tone button (e.g. Full 1, Pipe 1, Theater  
1, etc.) under ORGAN in the UPPER section  
(located to the right of the screen.)  
2. Press the ALTERNATE button under ORGAN in  
the UPPER section to hear a variation of the  
selected tone; press the ALTERNATE button  
again to return to the original tone.)  
Refer to the Owner’s Manual, pp. 70–72 for more  
information.  
3. Press a tone button (e.g. Strings, French Horn,  
Choir, etc.) under SYMPHONIC in the UPPER  
section to hear two tones simultaneously.  
TBS164 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20197 Page 1  
 
®ÂØÒňή  
AT-60S  
TurboStart  
Atelier organ  
Selecting Harmony Intelligence  
Use the following procedure to select Harmony  
Intelligence:  
1. Press the HARMONY INTELLIGENCE button  
(located to the right of the screen) until its  
indicator is lit.  
2. Touch a HARMONY TYPE on the screen.  
Note: You will see 8 Harmony Types on the screen;  
touch [t] or [u] on the screen to see additional  
Harmony Types.  
3. Press the HARMONY INTELLIGENCE button.  
Refer to the Owner’s Manual, pp. 109–110 for more  
information.  
Transposing  
Use the following procedure to transpose the  
keyboard:  
1. Press the [+] button to raise the key one  
semitone (located to the left of the disk drive.)  
2. Press the [-] button to lower the key one  
semitone.  
3. Press the [+] and [-] buttons simultaneously to  
return to the key of C.  
Refer to the Owner’s Manual, pg. 102 for more  
information.  
TBS164 ©2002 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20197 Page 3  
 

Q See DVR QSNDVR9M and QSNDVR16M User Guide
Renesas Network Card R0E5212BACFK00 User Guide
RIDGID Saw MS1065LZA User Guide
Rio Audio Stereo Receiver Digital Audio Receiver User Guide
Roberts Gorden Fan IDF Series User Guide
Rubbermaid Outdoor Storage 1S85 User Guide
Samsung Cell Phone GALAXY S4 User Guide
Samsung Remote Starter ML 3560 User Guide
SanDisk MP3 Player UM809 User Guide
Sanyo Battery Charger KR MH User Guide