1 ports Parallel PCI Adapter RC302
User Manual
1 ports Parallel PCI Adapter RC302
User Manual
Driver Installation
Windows 95/98/2000
Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and attempt to install
driver for it.
1.
2.
Start Windows 95/98/2000/XP
The“Update Device driver Wizard” will
appear, informing you that it has found a
“PCI I/O Card”. Click the “Next” button.
3.
Click “Other Location” for Windows 95
or “Specify a location” for Windows 98
to install the driver.
4.
Insert the driver CD in CD-ROM drive(D)
and click on the “Browse” button.
4
1 ports Parallel PCI Adapter RC302
User Manual
5.
at the “Browse” option, select
“CD-ROM(D)
FOLDER
“PCI_I/O\NM97X5\WIN9X”
“OK” button
6.
The “Update Device Driver Wizard” will
appear, informing you that it has found
the “NetMos PCI I/O Card” driver. Click
the “Next” button.
.
7.
Follow the instructions to finish up the
drive installation.
.
8.
Once Windows 9x has restarted, you
can now connect your external devices
to the PCI I/O card install the driver for
the external devices, please refer to the
external device user manual.
.
Windows NT 4.0
Using the existing hard disk controller in your system, you need to install the ATA/100 driver into Windows NT first.
Without ATA/100 driver support, hard drive attached to the ATA/100 IDE controller card can not boot up Windows NT.
Installing drivers with existing Windows NT 4.0:
Make sure Windows NT 4.0 is properly installed into your system first.
Step 1: Start Windows NT 4.0.
Step 2: Insert Driver CD into the CD-ROM drive.
Step 3: Select “Run” option in Windows NT.
Step 4: At the “Run” option, click on the “Browse” button.
Step 5: At the Browse for Folder window:
1. Select “CD-ROM Drive (D)”
2. Select NetMosMultiIODrivers.exe
5
1 ports Parallel PCI Adapter RC302
User Manual
3. Click on the Open button
Step 6: Finally, click the “OK” button
Step 7: Follow the instruction to finish the driver installation. Your system will automatically restart in order to complete
the driver installation.
Installing DOS Driver
Copy “D:\PCI_IO\NM97X5\DOS\NMDOSIN.EXE ” to your hard disk and run it.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for your product.
6
|