ENFORCER 24 LED CCD IR DAY/NIGHT CAMERA MANUAL
TROUBLE SHOOTING
®
The screen is blank
• Check that the camera is powered up.
• Check that the power supply’s polarity is correct.
• Check that the monitor is powered up.
ENFORCER
VIDEO
• Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
• Clean the lens (using a soft, clean cloth).
• Check that the light source is adequate.
MANUAL
1/3" CCD Color IR Day/Night Camera with 24 LEDs
The screen image has poor contrast
• Adjust the monitor’s contrast knob.
• Change the position of the camera.
Model
Video
Lens
Size
Viewing*
Angle
The screen image flickers
The screen image is distorted
The camera case is hot
IR LEDs do not turn on
• Change the position of the camera.
Number
Format
• Change the position of the camera.
EV-132C-DWL6Q NTSC
EV-132C-DWL8Q NTSC
EV-132C-DWLDQ NTSC
EV-132C-DWLHQ NTSC
6mm
8mm
12mm
16mm
6mm
8mm
12mm
16mm
53o
39o
26o
19o
53o
39o
26o
19o
• Check that the correct power supply is in use.
• Check that the correct power supply is in use.
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and
statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this
product in violation of any current laws or statutes.
EV-135C-DWL6Q
EV-135C-DWL8Q
EV-135C-DWLDQ
PAL
PAL
PAL
PAL
WARNING
Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or electric shock. Do not open the
case of this device, as there are no field-serviceable components inside.
EV-135C-DWLHQ
*All viewing angles are approximate
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class a digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service
for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair
or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any
kind to the purchaser or anyone else.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints or typographical errors.
Weatherproof
Copyright © 2007 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
SECO-LARM®
®
E-mail: sales@seco-larm.com
PITNW1
IR_24LQseries_076.PMD
Note: Products with model number that ends with "Q" or have a round green "Q" sticker represents RoHS compliant products.
|