VGA-to-HDMI Converter
Manual
Converts VGA formats to HDMI.
Supports resolution up to 1280x1024.
Audio input allows conversion of audio as well as video.
Plug and play operation—no setup neccessary.
NOTE: Model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.
SECO-LARM VGA-to-HDMI Converter
Overview:
VGA Input
HDMI Output
To 5VDC
RCA Input
Power Adapter
Installation:
1. Determine the location where the MVA-VH01Q unit will be installed.
2. Connect the input source’s VGA cable to the VGA input on the MVA-VH01Q.
3. Connect the source’s RCA cable to the audio input on the MVA-VH01Q.
4. Connect the output source’s HDMI cable to the HDMI output on the MVA-VH01Q.
5. Connect the included 5VDC adapter to the unit.
6. Switch on the input and output sources and verify that the system is functioning properly.
Sample Application:
HDMI Display
HDMI Cable
VGA Cable
RCA cable
To power
source
Computer or DVR
SECO-LARMDUo.wSn.loAa.d, fIrnomc.Www.Somanuals.com. All Manuals Search And Download.
SECO-LARM VGA-to-HDMI Converter
Troubleshooting
Make sure the converter is powered.
Make sure the input and output devices are powered.
Test the VGA and RCA cables separately to make sure
they are functioning.
Test the HDMI cable separately to make sure it is
functioning.
HDMI device does not function correctly
Make sure that you are trying to convert VGA to
HDMI. The MVA-VH01Q does not convert HDMI
to VGA.
Make sure the HDMI source is compatible with the
HDMI display.
Products Available from SECO-LARM:
Component Video
over Cat5e/6
VGA over Cat5e/6
1-in 5-out
HDMI over Cat5e/6
Audio Baluns
HDMI Cables
HDMI Switcher
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
E-mail: sales@seco-larm.com
PICCN3
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
mi-MVA-VH010Q_1005.docx
SECO-LARM U.S.A., Inc.
|