AS
Model No.:
No. de Modelo:
No de modèle :
DS20425
Color TV Owner’s Manual
Color TV Manual Del Propietario
Manuel d’instructions du télécouleur
A
S
“Read this manual before assembling
(or using) this product.”
VIDEO
IN
L
A
UDIO
R
MENU
CH
VOL
POW
ER
COM
PONE
NT
I
N
CONTENTS
Important Safety Instructions . . . . . . 2
Welcome to the World of Sanyo . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . 3
Basic Set-up and Connections . . . . . . 4
Front & Rear Panels . . . . . . . . . . . . . 5
Using the Component Video and Audio
Input Jacks . . . . . . . . . . . . . . . . . . . . 6
Using the Front A/V Input Jacks . . . . 7
Using the Rear A/ V Input Jacks . . . . 8
Using the Remote Control . . . . . 9 ~ 10
TV Adjustment and Setup
Warranty (Mexico) . . . . . . . . . . . . . . 16
Warranty (U.S.A. and Canada) . . . . . 17
Child Safety Matters . . . . . . Back Cover
How to Operate the
On-Screen Menu . . . . . . . . . . . . . . 10
Audio Mode . . . . . . . . . . . . . . . . . 11
Adjusting Picture/Sound . . . . . . . . 11
Adding or Deleting a Channel . . . . 12
Closed-Captioning . . . . . . . . . . . . . . 12
V-Guide Operation
ESPAÑOL . . . . . . . . . . . . . . 18 ~ 35
Contenido . . . . . . . . . . . . . . . . . . . 18
(Parental Control) . . . . . . . . . . 13 ~ 14
Care and Cleaning . . . . . . . . . . . . . . 14
Helpful Hints (problems/solutions) . 15
FRANÇAIS . . . . . . . . . . . . . . 36 ~ 51
Table des matières . . . . . . . . . . . . 36
Importado Por :
Printed in U.S.A. SMC, March 2005
Impreso en U.S.A. SMC, Marzo 2005
Imprimé aux é.-U. SMC, mars 2005
Comercializadora México
Americana, S. DE R.L. DE C.V.
Nextengo Nº 78
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P.
02770, RFC CMA 9109119L0
Telefono: 55-5328-3500
Part No. / No. de Parte/
o
N
de pièce : 1JC6P1P0200A–
Service Code/Código de Servicio/
Code de service : 610 319 8576
Welcome to the World of Sanyo
Thank you for purchasing a Sanyo Color Television. You made an excellent choice for Performance, Styling,
Reliability, and Value. The TV is designed with easy to use on-screen set-up instructions and operating features.
Please retain this owner’s manual for future reference. Need assistance? Visit our Web site at
www.sanyoctv.com or call toll free 1-800-877-5032.
FEATURES
N Trilingual On-Screen Menu
N Automatic Channel Search
N Auto Shut Off
N Game Mode
N Automatic Fine Tuning
N 480i Component AV Input Jacks
VHF and Cable Channels
N Audio/Video In Jacks
2 sets—Front (AV1), Rear (AV2)
N S-Video In Jack
N 24-Remote Control
0~9 Numbered Channel Selection
Channel Scanning
N Closed-Captioning/Quikcap
N Digital picture controls with
on-screen display
N Sleep Timer (3 hours)
N TV Reset
Volume
Power
Display
Caption
Menu
Mute
N MTS stereo/SAP Decoder
N Auto Flesh Tone
Recall
Sleep
N 181 Channel Tuning System
VHF Channels 2-13
N Factory preset adjustments for
picture/sound
Reset
V-Guide
UHF Channels 14-69
N Front Surround Sound
N Tone
Input
Cable TV (CATV) 1, 14-125
N V-Guide (Parental Control)
SPECIFICATIONS
PICTURE TUBE SIZE, True Flat Screen
DEPTH DIM. (Thickness) . . . . . . . . . . . . . . . . . 18.8 in. (478mm)
WEIGHT (Approx.) . . . . . . . . . . . . . . . . . . . . 53.5 lbs. (24.3 Kg.)
SOUND (2 Speakers) . . . . . . . . . . . . . . . . . . . . . . . Size: 5x9 cm
AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in with 1W/ch
(Measured Diagonally) . . . . . . . . . . . . . . . . . . . . . . . . . 20-inches
PICTURE RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . 260 Lines
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Lines
AUDIO/VIDEO INPUT JACKS . . . . . . . . . . . . . . . . . . . . . Video Input
. . . . . . . . . . . . . . . . . . . . Audio Input (2 sets, R/L – Front/Rear)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S-Video Input
ANTENNA INPUT . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75Ω
POWER REQUIREMENT . . . . . . . . . . . . . . . . . . . . . 120VAC 60Hz
POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 watts
480i COMPONENT VIDEO
INPUT JACKS . . . . . . Component Video Inputs (Y, Pb, Pr – R/L)
HORIZONTAL DIM. (Width) . . . . . . . . . . . . . . . . 23.1 in. (588mm)
CAUTION: FCC Regulations state that improper modifica-
tions or unauthorized changes to this unit may
void the user’s authority to operate the unit.
VERTICAL DIM. (Height) . . . . . . . . . . . . . . . . . 17.8 in. (453mm)
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc.
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.
3
BASIC SET-UP AND CONNECTIONS
INITIAL SET-UP
Press POWER key to turn on TV.
5. Follow on-screen instructions, see
pages 10 ~ 12.
Install batteries in remote control,
see page 9.
4.
1.
Connect signal, see below.
Plug in AC power cord.
2.
3.
CONNECTING CABLE SERVICE, OR RF ANTENNA, OR SATELLITE DISH
RECEIVER TO TV
RF Antenna
Satellite Receiver
Cable Box
‚
‚
‚
CATV IN
CH3
CH4
Operational Tip for No Signal
Connection:
VIDEO
VIDEO
L-AUDIO-R
L-AUDIO-R
IN FROM
SAT.
OUT TO TV
S-VIDEO
IN
OUT
If the TV is used as a monitor only, with a
DVD player or some other type of external
equipment, and no cable or antenna signal
is available, the following setup is
necessary:
Notes:
– If you do not have a
cable box, connect
cable directly to TV
75 ohm jack or VCR.
– If you do not have a
VCR, connect signal
directly to TV 75 ohm
jack.
VCR Back
IN
FROM ANT.
OUT
OUT TO TV
– Your TV is designed to automatically
search for available channels. Therefore,
the initial start up requires that you press
the MENU key, enabling the TV to auto-
matically go through the channel search
process before you can operate the TV.
After the initial channel search is com-
pleted, you must press the MENU key
again to complete the channel search
process. This may take several minutes.
TV Back
UHF/VCATV
COMPONENT AUDIO VIDEO
INPUT 2
2
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by
local government authorities.
To receive cable programs,
even with equipment which
is capable of receiving cable
channels, the consumer
must subscribe to the cable
company’s service.
VIDEO
Y
(MONO)
P
B
L
P
R
R
S-VIDEO
– After the channel search process is com-
plete (2 searches), you can press the
INPUT key on the remote control to use
the TV as a monitor.
I
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
The TV will automatically select the correct Antenna
mode for the type of RF signal you connect.
I
TV will switch off automatically after 15 minutes if there
is no signal reception (cable out or station not broad-
casting).
I
If you move the TV to a new location, press the RESET
key twice after connecting the signal and turning on the
TV.
4
FRONT AND REAR PANELS
FRONT
VIDEO IN L- AUDIO -R
MENU
CH
VOL
POWER
Audio Video In Jacks (AV1)
Connect video equipment here (see page 7).
BACK
UHF/VHF/CATV
COMPONENT
AUDIO VIDEO
INPUT 2
75Ω
2
480i Component Video In Jacks
(Component 2: Y, Pb, Pr)
Connect video equipment here
(see page 6).
VIDEO
Y
(MONO)
L
P
B
R
Note: Audio Video Input (AV2) and
Component inputs share the
same audio (R/L) input jacks.
P
R
S-VIDEO
Audio Video Input 2 Jacks (AV2)
Connect video equipment here (see pages 6 and 8).
S-Video In Terminal
To enhance video detail use the AV2
S-Video jack instead of the AV2 Video jack,
if available on your external equipment. (An
S-Video connection will override connection to
the AV2 video input jack. See page 8.)
Note: S-Video connection will override an AV2
video connection.
POSITIONING THE TV
Do not position the TV in a confined
area. Allow space for normal air
circulation around electronic parts.
5
USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS
CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting
Notes: DVD Player component output must be set to
cables. (Cables are not supplied.)
Interlaced (480i).
Audio/ Video Input 2 (AV2) and Component inputs
share the same audio (R/L) input jacks.
Connect a DVD Player or other equipment’s interlaced
Component Video Out to the TV Component Video In
(Y-Pb-Pr) Jacks.
‚
Connect equipment to the Component2 video
input or the AV2 video input, but not both types at
the same time.
ƒ Connect the DVD Player’s Audio Out to the TV AV2
Audio In (L/R) Jacks.
Press POWER to turn on the TV. Turn on external
equipment also.
„
ꢀ To access Audio Video inputs, press the INPUT key to
select COMPONENT2.
DVD Player
What you will need for connections:
VIDEO OUT
AUDIO OUT
COMPONENT VIDEO OUT
VIDEO OUT
SELECT
Component video cable – 1
‚
S-VIDEO COMPONENT
COAXIAL
L
R
Y
PB
PR
/CR
/CB
ƒ Audio Cable – 1
DIGITAL OUT
S-VIDEO OUT
ƒ
TV Back
‚
UHF/VHF/CATV
COMPONENT
2
AUDIO VIDEO
INPUT 2
Remote Control
75Ω
VIDEO
L
POWER RESET
Y
INPUT
MENU
RECALL
PB
CH
ꢀ
ƒ
PR
R
„
‚
S-VIDEO
I
A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal
is being detected at the Component jacks. Check con-
nection, and turn on external equipment.
I Press INPUT key after connecting cables to access
the A/V inputs. There is NO need to tune to a blank
channel.
6
USING THE FRONT VIDEO AND AUDIO INPUT JACKS
CONNECTING A VIDEO GAME OR OTHER
EQUIPMENT
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
ƒ Press POWER to turn on the TV. Turn on external
equipment also.
Connect game Audio Output (R/L) to the TV Audio
Input (R/L). Then connect game Video Output to the
TV Video Input.
‚
To access Audio Video inputs, press the INPUT key to
select GAME or select using the menu.
„
What you will need for connections:
VIDEO IN L- AUDIO -R
MENU
CH
VOL
POWER
Audio Cable – 1
‚
Remote Control
POWER RESET
INPUT
MENU
RECALL
CH
„
Video Game
ƒ
Camcorder
‚
I A solid Blue screen with the word VIDEO1 displayed,
means that the Video mode is selected, but no signal is
being detected at the Video jacks. Check connections,
turn on external equipment.
I Press INPUT key after connecting cables to access
the A/V inputs. There is NO need to tune to a blank
channel.
7
USING THE REAR AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR
OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
Using the S-Video jack overrides the Video (AV2) jack.
Press POWER to turn on the TV. Turn on external
ƒ
„
Connect VCR or other equipment’s Audio Video Out to
the TV Audio Video Input 2.
‚
equipment also.
To access Audio Video inputs, press the INPUT key
to select VIDEO2.
For Mono VCR (Single Audio Jack) connect VCR
Audio Out to TV Audio (L) Input 2.
Note: Audio Video Input 2 (AV2) and Component
inputs share the same audio (R/L) input jacks.
OR
x
Connect DVD Player or other equipment’s S-Video
Out and Audio Out to the TV S-Video and Audio In
Jacks.
Back View of VCR
DVD Player
VIDEO OUT
AUDIO OUT
COMPONENT VIDEO OUT
IN
VIDEO OUT
SELECT
Remote Control
FROM ANT.
IN
VHF/UHF
R-AUDIO-L
R-AUDIO-L
VIDEO
VIDEO
RF
S-VIDEO COMPONENT
CHANNEL
4
TO TV
COAXIAL
L
R
Y
PB
PR
/CR
/CB
3
OUT
DIGITAL OUT
S-VIDEO OUT
OUT
POWER RESET
INPUT
ENU
x
RECALL
‚
CH
x
Rear TV AV Input Jacks
ƒ
„
UHF/VHF/CATV
75Ω
COMPONENT AUDIO VIDEO
INPUT 2
2
VIDEO
What you will need for connections:
AV Cable – 1
L
‚
OPTIONAL CONNECTION
‚
R
x
S-Video Cable – 1
Audio Cable – 1
x
x
S-VIDEO
x
I
I
I
Make sure all cable connectors are fully seated on jacks.
A solid Blue screen with the word VIDEO2 displayed,
means that the Video mode is selected, but no signal is
being detected at the Video jacks. Check connections,
turn on external equipment.
Always match A/V cables according to the colors; red for
right audio, white for left audio, and yellow for video.
Press INPUT key after connecting cables to access
the A/V inputs. There is NO need to tune to a blank
channel.
I
8
USING THE REMOTE CONTROL
INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
–
Do not mix old batteries with new ones or mix different types of
batteries together.
–
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
REMOTE CONTROL KEYS
Point towards TV
Input Key—Press to select the program source to
watch: TV signal or signal from DVD Player or other
equipment you have connected to the A/V jacks.
Œ
POWER RESET
INPUT
MENU
Œ
RECALL
Menu Key—Use this key with the LM and – + keys
to navigate and adjust features of the on-screen menu
system. (See pages 10 ~ 12.)
CH
VOL
VOL
Ž
Channel Scanning (CH
(VOL – +) Keys—Press to scan through the chan-
nels in memory and to adjust the volume.
LM) and Volume
Ž
MUTE
DISPLAY
2
5
8
0
3
6
1
4
Mute Key—Press once to suppress the volume.
Press again to restore volume to previous level.
Caption Key—(See page 12.)
‘
7
9
SLEEP
V-Guide Key—(See pages 13 ~ 14.)
CAPTION
‘
V-GUIDE
I
I
Be sure batteries are installed correctly.
Point the remote control toward the TV. Objects between
the remote control may cause misoperation of the remote
control function.
I
I
Cannot select channel with number keys. Press “0” in
front of numbers 1~9. Example: Channel 05.
Adjusting the volume level: Flashing Right arrow
indicates volume is increasing and flashing Left arrow
indicates volume is decreasing.
(Continued on page 10.)
9
REMOTE CONTROL KEYS (CONTINUED)
POWER RESET
INPUT
V-Guide to OFF
Language to English
Sleep Timer
’
“
”
•
•
•
•
MENU
RECALL
CH
Video to TV
VOL
VOL
If desired, personal settings can be made again using
the menu options.
MUTE
DISPLAY
Power Key—Press to turn TV ON or OFF.
“
”
•
11
12
Recall Key—Press to switch between the last two
channels you selected.
2
5
8
0
3
6
1
4
Display Key—Press once to display the channel
number. Press twice to display the channel number con-
tinuously. Press again to remove the channel number.
•
7
CAPTION
9
SLEEP
11 Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key
until C1–– appears. Then press the other two numbers.
V-GUIDE
Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel Search
and clear all customized settings. These features will
automatically reset:
Picture Adjustments: Color, Tint, Contrast, Bright,
Sharpness, Tone, and Surround
Audio to Stereo
’
Sleep Key—Press this key then press the “0” key to set
12
the Sleep Timer. The desired time can be set from 30
minutes up to 3 hours in 30-minute increments. Sleep
Timer will switch off the TV automatically.
•
•
•
•
Note: The Sleep Timer cancels when the TV is
turned off or if a power failure occurs.
Channel Memory
Caption to OFF
TV ADJUSTMENT AND SETUP
The on-screen menu provides the viewer with easy access to adjustments and settings. Just use the keys on the remote
control and follow the on-screen instructions.
HOW TO OPERATE THE ON-SCREEN MENU
LM keys
– + keys
1. Press MENU key.
Audio
±
Stereo Mono SAP
2. Use the LM keys to highlight the desired feature.
Picture/Sound
±
Auto
Game
Cable
NO
Manual
3. Use the – + keys to choose desired option. (
±
indicates selected item.)
Antenna
CH. Search
CH. Scan Memory C 34
±
±
VHF/UHF
Start
Added
Espanol
4. Press the MENU key to exit.
Items with submenus require additional steps.
Menu Language
±English Francais
Press MENU key to exit
Note: The menu will display on the screen for approximately
20 seconds. Press Menu again to redisplay.
10
SETTING AUDIO MODE
Note: The TV will automatically reset to stereo if
unplugged or a power failure occurs.
Select desired sound setting, Stereo, Mono, or SAP
(secondary audio program).
Note: Stereo and SAP must be part of the broadcast
signal.
LM keys
– + keys
1. Choose Stereo, Mono, or SAP from the Audio options.
Audio
±
Stereo Mono SAP
ADJUSTING PICTURE/SOUND
For automatic picture/sound adjustment
Choose Auto from the Picture/Sound options.
Adjust the picture/sound manually
LM keys
– + keys
Audio
1. Choose Manual from the Picture/Sound options.
2. Press the MENU key to open the picture/sound settings submenu.
Picture /Sound
Auto
Game
±Manual
3. Use the LM keys to highlight the picture or sound setting
you want to change.
LM keys
– + keys
Color
Tint
4. Use the – + keys to adjust settings.
Contrast
Brightness
Sharpness
For automatic game settings
1. Choose Game from the Picture/Sound options.The screen and
sound will automatically change to factory preset settings.
Tone
L- - -- IS S S S S SH
Surround
OFF
±O N
2. Press the MENU key to exit.
Press MENU key to exit
Note: Select the front A/V input jacks by pressing the INPUT
key on the remote control.
RESETTING THE ANTENNA/CABLE MODE AND CHANNEL SEARCH
Resetting the Antenna/Cable Mode or CH. (Channel) Search is required only if additional channels become available,
such as moving to another city or having a cable service installed.
CH. Search
NO
±Start
CH. Scan Memory
Menu Language
1. Choose Start from the Ch. Search menu options.
Press MENU key to exit
I
I
I
The menu will display on the screen for approximately 20
seconds. Press MENU again to redisplay.
Surround sound will expand the sound effect while
receiving MTS stereo signals.
I
Under weak stereo signal conditions, you may receive better
quality sound in the “Mono” position.
When setting the Antenna mode, choose Cable if your TV
is connected to a cable system, otherwise choose
VHF/UHF.
11
ADDING OR DELETING CHANNELS
seconds. During that time, the word “Added” or
“Deleted” will become yellow.
1. Press the MENU key.
2. Use the LM keys to highlight CH. Scan Memory.
3. Press the + key to highlight channel number entry area.
6. Use the 0 ~ 9 or LM keys to choose other channels to
delete or add, or press the MENU key to exit.
4. Enter the channel number you want to add or delete
(example): C34. For cable channels above 99, press and
hold the 1 key until C1– – appears. Then enter the other
two numbers.
CH. Scan Memory
Menu Language
C 34 Deleted
Select channel using LM, 0~9 keys
Press MENU key to exit
5. Press the + key to change the present setting. Example:
Added will change to Deleted. This takes about three
CLOSED-CAPTIONING
Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV screen.
Because different types of captions can be transmitted with the TV signal, separate captioning modes are provided. The
captioning modes recognized by this model are: Caption1, Caption2, Text1, and Text2. Local broadcasters decide which
caption signals to transmit.
CAPTION1: Main mode used for
program captioning (words match the
program you are watching). These cap-
tions are generally one or two lines.
TEXT2: An alternative mode used to display large amounts of
text (same as Text1).
QUIKCAP: Allows captions to toggle on and off with the
Mute function. Press the MUTE key on the remote control
to block the TV sound; the captions display automatically.
Press the MUTE key again to restore the sound, the cap-
tions will disappear. Quikcap displays program captions in
the Caption1 mode.
CAPTION2: An alternative mode for
program captioning. Caption2 may be
used by the broadcaster to provide cap-
tions in another language, such as,
Spanish or French.
TWO OUTS AND TWO STRIKES
Caption1/ 2
SETTING CAPTIONS
1. Press the CAPTION key on the remote control.
TEXT1: This mode is used to display large
amounts of text. This text will appear within
a black box that may be nearly as large as
the TV screen. Text displayed in this
manner does not generally relate to the
program. Captions may be used by broad-
casters to provide weather reports, community
bulletins, etc.
TONIGHT: BECOMING MOSTLY
CLOUDY WITH A 40 PERCENT
CHANCE OF RAIN. COLD WITH
A LOW IN THE UPPER 30's WEST
WIND AROUND 20 MPH, SHIFT-
ING TO NORTHWEST AROUND
MIDNIGHT. FRIDAY: MOSTLY
CLOUDY AND COLDER WITH
A 50 PERCENT CHANCE OF
RAIN. HIGH IN THE MID 50's.
2. Press the 0 key on the remote control to select options:
OFF, CAPTION1, CAPTION2, TEXT1, TEXT2, or
QUIKCAP.
Text1/ 2
I
broadcasted, a black box may appear and
remain on the TV screen as shown.
To remove this black box, set captioning to
any mode other than Text1 or Text2 or press the RESET
key to cancel captioning and other customized settings.
Channels deleted from scan memory can be selected with
the number keys.
I
Restoring deleted channels, use the on-screen menu to
manually add channels, or start CH. (Channel) Search
from the menu, or press the RESET key twice. (It may
take a few minutes to search thru the available channels.)
I
Channel number will not display continuously when cap-
tioning is on.
I
If Caption Text mode is selected and no captioned text is
12
V-GUIDE (PARENTAL CONTROL)
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP REG-
ULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER
COUNTRIES.
ABOUT MPAA AND TV PARENTAL
GUIDELINES
ming contains any or all of these conditions, these letters
become part of the icon that is displayed on the TV screen.
MPAA and TV Parental Guidelines are rating systems that
provide advance cautionary information to parents about
the content of movie and television programming.
A rating icon will generally appear in the upper left
hand corner of the TV screen for about fifteen
seconds at the beginning of a program and should
be repeated at the beginning of the second hour of a long
program. It may also appear when returning from commer-
cials. There may be other instances when these icons will be
displayed as well. Parents are encouraged to become familiar
with these icons and their meanings.
The V-Guide system contain both age-based and content-
based settings. This gives parents discretionary ways of
choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Sugges-
tive Dialog), L (Adult Language), S (Sexual Situations), V
(Violence), and FV (Fantasy Violence). When program-
V-GUIDE OPERATION
Use this feature to supervise television viewing for young children. This television can be set to automatically block
programs with content you deem as inappropriate for your children to view, including: suggestive dialog, adult language,
sexual situations, violence, and fantasy violence.
The ability of the television to block the reception of specific programming content depends upon several conditions:
1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable companies must transmit the
rating code signal, and 4) The TV must be properly setup to decode the signal.
SETTING MPAA MOVIE RATING
1. Press the V-GUIDE key on the remote control to display menu.
2. Press the + key to switch V-Guide ON.
X
B
V-GUIDE
NC17 B
ꢁ R
PG13 U
PG
MPAA Movie Ratings
TV Parental Guidelines
B
U
U
3. Press the + key again. Then use the L M keys to highlight rating.
G
4. Press the MENU key to Block (B) or Unblock (U) selected rating.
(ꢁ Arrow indicates selection.)
Press MENU key to BLOCK
Use LM, – + keys to select
Press V-GUIDE key to exit
5. Press the – key to return to the V-Guide Options menu.
I
I
I
Use the CHANNEL L M keys and the VOLUME – +
keys to navigate through the menus.
The V-Guide display remains on screen for approximately
20 seconds. If it disappears, press the V-GUIDE key.
V-Guide feature is accessible only from the remote
control.
(Continued on page 14.)
13
SETTING TV PARENTAL GUIDELINES
10. Press the MENU key to display the Content Option menu.
6. Use the LM keys to highlight TV Parental Guidelines.
11. Use the L M keys to highlight a category (D-Sugges-
tive Dialog, L-Adult Language, S-Sexual Situations,
V-Violence, FV-Fantasy Violence).
7. Press the + key. Then use the LM keys to highlight
rating.
8. Press the MENU key to Block (B) or Unblock (U)
selected rating. (ꢁ Arrow indicates selection.)
12. Press the + key. Then use the LM keys to highlight
a rating.
TVMA B
TV14
TVPG B
ꢁTV-G B
TVY7 U
V-GUIDE
13. Press the MENU key to Block (B) or Unblock (U)
selected rating. (ꢁ Arrow indicates selection.)
B
MPAA Movie Ratings
TV Parental Guidelines
14. Press the V-GUIDE key to exit; or press the
– key to return to the Content Options menu.
TV-Y
Content
U
15. Repeat steps 11 through 13 to Block (B) or Unblock (U)
additional content ratings, if desired.
Press MENU key to BLOCK
Use LM, – + keys to select
Press V-GUIDE key to exit
D-Suggestive Dialog
L-Adult Language
SETTING CONTENT-BASED GUIDELINES
9. Follow steps 6 and 7. Use the LM keys to highlight
Content.
ꢁTV14
TVPG
B
B
S-Sexual Situations
V-Violence
FV-Fantasy Violence
TVMA B
V-GUIDE
Press MENU key to BLOCK
Use LM, – + keys to select
Press V-GUIDE key to exit
TV14
TVPG
TV-G
TVY7
TV-Y
B
B
B
U
U
MPAA Movie Ratings
TV Parental Guidelines
TURNING OFF THE V-GUIDE
1. Press the V-GUIDE key.
ꢁContent
2. Use the – + keys to select OFF.
Press MENU key to set
Use LM, – + keys to select
Press V-GUIDE key to exit
Note: Networks and local stations may or may not
include the content ratings portion of the TV
Parental Guidelines.
I
I
I
The TV will automatically block (B) ratings above or
unblock (U) ratings below selection. For example, if you
block rating R, NC17 and X will be blocked as well.
You can block a content rating such as TVPG-V and still be
able to watch TVPG programs with ratings of S-L-D pro-
vided TVPG is unblocked (U).
I
Blocking TVY7 does not block higher ratings.
To temporarily unblock or view Blocked (B) programs, set
V-GUIDE to OFF, or press the RESET key twice to clear all
Blocked (B) ratings and other customized settings.
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents,
solvents, and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: Never spray liquids on the screen because it can run down and drip onto the chassis. This may
cause component failure not covered under Warranty.
14
HELPFUL HINTS (Problems/Solutions)
Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve
simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed
for your problem. If the problem still persists, before returning your TV, please visit our website at www.sanyoctv.com or
call us toll free at 1.800.877.5032. We can Help!
Problem:
Check these Conditions:
Try these Solutions:
Page No.
ꢂ
ꢂ
TV turns off
automatically.
Check signal (Cable/Ant.) connection.
Power surge protection feature.
Press POWER key.
4
ꢂ
ꢂ
The sleep timer may have been set.
ꢂ
Unplug TV momentarily.
ꢂ
ꢂ
No picture, poor
picture, or wavy
lines in picture.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from household
Adjust antenna.
Try a different channel.
Select AUTO from Picture/Sound
on-screen menu or press RESET key.
4, 11
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
appliance.
Turn off Mixer, Drill, Blender, etc.
ꢂ
ꢂ
No sound, poor
sound. No sound
on some channels.
May be station trouble.
Try a different channel.
Adjust Volume.
6 ~ 9
ꢂ
MUTE function may be on.
ꢂ
ꢂ
Check Audio/Video connections.
ꢂ
ꢂ
ꢂ
Black box on
screen.
Caption Text Mode without display
Press RESET key twice.
Switch OFF Captions (see page 12).
12
11
information.
ꢂ
ꢂ
No Cable chan-
nels above
Cable Channel Indicator C should appear next
to channel number.
Select CABLE from Antenna on-screen menu;
then start CH. (channel) Search using the menu.
number 13.
ꢂ
ꢂ
No Captioning.
Check if station is broadcasting a Closed-
Press CAPTION key to select Captioning.
12
11
Caption signal.
ꢂ
ꢂ
ꢂ
Poor color or
no color.
Check if program is in color.
Check antenna connections.
Color or Tint misadjusted.
May be station trouble.
Try a different channel.
Adjust antenna.
Press RESET key to restart channel search.
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
Blue Screen with
Video1, Video2, or
Component2
Check Audio/Video connections.
Check external equipment.
Check external equipment setting.
check DVD setting.
Press INPUT key.
6 ~ 8
ꢂ
Switch on external equipment.
Set external equipment output connections to
match input connections.
ꢂ
ꢂ
displayed.
ꢂ
ꢂ
No TV Stereo or
SAP sound.
Check if station is broadcasting a true MTS
Select STEREO or SAP from Audio on-screen
menu.
11
11
stereo signal or a SAP signal.
ꢂ
ꢂ
ꢂ
Cannot select or
scan some
channels.
Channel may be removed from memory.
Check antenna connections.
V-Guide is set to block programming.
Select CH. SCAN MEMORY and manually add
channels or start CH. (channel) search.
Set V-GUIDE to OFF or press RESET key to clear
all setting.
ꢂ
ꢂ
13 ~ 14
9 ~ 10
ꢂ
Remote Control
will not work TV.
Check batteries.
Check if TV is plugged in.
ꢂ
ꢂ
Replace batteries.
Aim remote control at front of TV.
ꢂ
ꢂ
ꢂ
Menu System
words seem
misspelled.
May be a different language is selected.
Reselect menu language choice using the on-
screen menu.
10
ꢂ
Cabinet makes
popping sound.
This is a normal condition during warm-up and
cool down of the plastic cabinet parts.
15
MEXICO GUARANTEE
IMPORTADOR:
DESCRIPTION: Television
BRAND: SANYO
COMERCIALIZADORA MEXICO
AMERICANA, S.DE R.L. DE C.V.
AV. NEXTENGO No 78
COL. SANTA CRUZ ACAYUCAN
DEL. AZCAPOTZALCO, MÉXICO, C.P. 02770
RFC: CMA9109119L0
MODEL: DS20425
GUARANTEE
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND
A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.
UNDER THE FOLLOWING CONDITIONS:
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER
UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS
GUARANTEE.
2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR
MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID
AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T
REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE
THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST
RESPECTIVELY.
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,
AND THE RESPECTIVE COST OF TRANSPORTATION.
THIS GUARANTEE WILL BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.
*
*
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,
COMPONENTES, CONSUMIBLES Y ACCESORIOS:
STAMP, DATE AND SIGNATURE
SUCURSAL VALLEJO
SUCURSAL MINERVA
o
o
Silos N 135, Col. Minerva
Poniente 126 N 288 B
OF
Col. Nueva Vallejo
México, D.F.
Deleg. Iztapalapa
México, D.F. 09810
Tels. 5646-4551
5646-4550
STORE
Tels. 5567-5378
5368-0105, 8589-8033
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________
CLIENT’S NAME: __________________________________________________________________________________
ADDRESS: ______________________________________________________________________________________
EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________
SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________
TELEPHONE: _____________________________________________
16
UNITED STATES AND CANADA WARRANTY
ONE-YEAR LIMITED WARRANTY
THIS LIMITED WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE
UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING THE UNITED STATES’ OTHER
TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL PUR-
CHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
FOR ONE YEAR from the date of purchase, Sanyo Manufacturing Corporation will replace any defective TV.
To insure proper warranty exchange, keep the original sales receipt for evidence of purchase. Return the
defective TV to the retailer along with the receipt and the included accessories, such as the remote
control. The defective TV will be exchanged for the same model, or a replacement model of equal value,
if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from
defects in material and workmanship under normal use and conditions. Should replacement be necessary under
this warranty for any reason due to manufacturing defect or malfunction during the first year from date of origi-
nal purchase, Sanyo Manufacturing Corporation will provide a new TV via exchange at the retailer.
For customer assistance, whether during or out of the warranty period, call toll free 1-800-877-5032.
Weekdays 7:30 AM – 7:00 PM Central Time
Saturday 7:30 AM – 4:00 PM Central Time
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which
vary from state to state.
(EFFECTIVE: August 1, 2002)
For your protection in the event of theft or loss of this product, please fill in the information requested
below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________ Date of Purchase _________________________
Serial No.______________________________ Purchase Price___________________________
Where Purchased_________________________
(Located on back of unit)
AS
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
17
|