TO THE OWNER
OPERATING KEYS LOCATIONS
OPERATING KEYS DESCRIPTIONS
PROGRAMMING THE REMOTE
1. Find your equipment’s brand
codes in the charts on pages 5
and 6. After programming is
confirmed, enter codes in
spaces provided on back of
remote and below.
If you enter an incorrect code
number, repeat Step 2.
Keys on this remote control operate functions similar to those on
your original remote controls. For specific key operation, such as
Recall or Display, refer to the original owner’s manuals for your
equipment.
Welcome to the World of Sanyo
Mode Keys—Use these keys to program the remote and to
1
select the operating mode (VCR, TV , or CABLE).
•
Thank you for purchasing the Sanyo “Moonlight” Universal
Remote Control. You made an excellent choice for Performance,
Reliability, Value, and Styling.
After entering a code number
check the Power and Channel
operation. If these functions
operate pro p e r l y, program-
ming is complete. If not,
reprogram using another code
if available.
Video Mode Key—In the TV mode, this key selects the
2
program source: TV or A/V jacks. In VCR mode, this key
•
The RMT-U100 replaces three separate remote controls. This
simplifies the operation of your home entertainment system.
This remote will operate your Video Cassette Recorder,
Television, and Cable Conve rter Box. Simply program it
according to the directions in this owner’s manual. Then press
the proper function key (VCR, TV, or CABLE ) to operate each
product.
functions as the TV/VCR key. This key has no function in
2. Press and hold the VCR, TV
or CABLE key while entering
the two-digit code number.
The mode key will flash 5
times.
Cable mode.
1
Number Keys—Use these keys to directly select channels
3
•
on your VCR, TV, or Cable Converter Box.
2
8
•
TV CODE
•
•
3. Repeat Step
2
for each
Recall Key—Press to switch between two channels.
4
The Sanyo Universal Remote Control features large glow-in-
the-dark basic operating keys. It also has function keys that
light when a key is pressed. This indicates the active mode. You
never need to wonder which component the remote is
controlling. Just observe which mode key lights. That’s the
answer.
piece of equipment you
have (VCR, TV, and/or
Cable Converter Box).
VCR CODE
•
3
Menu Key—Use this key with the
/
and
/
5
CABLE BOX CODE
•
keys to adjust the features of a Sanyo TV on-screen menu
•
9
4
system.
VCR Codes Chart
•
•
5
10
Mute Key—Press once to turn off the volume. Press again
6
The RMT-U100 universal remote control comes with keys that
are preset to operate your Video Cassette Recorder, regardless of
the mode you have selected.
• •
to restore the volume.
•
11
•
VCR Keys—These keys control Fast Forward (FF),
Rewind (REW), Play, Record, Stop, and Pause functions
7
6
12
•
BEFORE YOU BEGIN
of your VCR. They operate in all three modes.
• •
7
Installing The Batteries
Reset Key—Press this key twice to restore factory settings
8
•
Step 1. Remove the battery cover by
pressing the tab and tilting
the cover upward.
on a Sanyo TV.
•
Sleep Key—Use this key to set the Sleep Timer on your TV.
9
Step 2. Install two AA batteries as
shown. Be sure to match the
•
Caption Key—Press to select the caption mode: OFF,
10
C1, C2, T1, T2 or QUIKCAP on a Sanyo TV.
/
signs on the batteries
marks inside the case.
•
with the
/
Channel (
/
) and Volume (
/
) Keys—Press to
11
Note: Do Not mix new and used batteries or mix different types
scan through the channels and to adjust the volume.
•
of batteries together.
Display Key—Press to display the Channel Number on the
12
Screen.
•
2
3
4
5
|