Scosche Industries Headphones IBHPK User Guide

LED CHART  
IBHPK  
STATUS  
LED/COLOR  
Blue LED Blinking  
Paired Mode  
®
UNIVERSAL WIRELESS BLUETOOTH  
Blue LED Solid (Headphones)  
Blue LED Slowly Blinking (Transmitter)  
Connected with Bluetooth®  
Headphones or Bluetooth Receiving Device  
HEADPHONES WITH IPOD TRANSMITTER KIT  
®
Congratulations on your purchase of the Scosche IBHPK Bluetooth Wireless Headphones & Transmitter Kit.  
®
Red and Blue LED Solid  
(Violet Hue)  
Charging and Conected with Bluetooth® Device  
This system incorporates the latest Bluetooth® technology for your Bluelife wireless lifestyle. Before using,  
please read manual carefully.  
FEATURES/SPECS:  
Red LED Solid  
Red LED Off  
Battery is Currently Charging or Low Battery  
Charging Complete  
®
BLUETOOTH HEADPHONES:  
.
.
.
.
.
.
Cutting-edge ergonomic folding design  
2.5mm Switching Input/Output port allows  
UBHP to act as a wired headphone system  
2.5mm male to 3.5mm male adapter cable included  
Female 3.5mm to Male RCA cable included  
Built in Lithium-ion 6-7 hour Rechargeable Battery  
Supports Profiles: A2DP/AVRCP,HFK  
or a Bluetooth® stand-alone receiver.  
TROUBLE CHART  
.
USB Charging "Y" Cable  
TIP/SOLUTION  
PROBLEM  
Make sure both devices have been recently  
charged. These products will have trouble pairing  
on low battery voltage. 2) make sure you power  
on the UBHP first, then the transmitter.  
Difficulty paring Headphones and Transmitter  
®
IPOD BLUETOOTH TRANSMITTER  
Lithium-ion Rechargeable Battery: Up to 10 hours of use. (450mAh capacity)  
Designed with 30-pin iPod bottom dock (All iPods with bottom dock connector)  
Wireless Range: Up to 30 Feet (10 Meters)  
Bluetooth V1.2  
Make sure reciever is powered ON first. 2) Make  
sure your cell phone's Bluetooth® power is enabled  
and it is looking for devices, If needed, consult  
your cell phone's manual for information on  
Difficulty pairing Headphones and Bluetooth  
cell phones.  
Transmitter Power < 3dbm  
Receiver Sensitivity: -78+4dm  
®
pairing or discovering Bluetooth devices for  
Supported Profiles: Advanced Audio Distribution Profile (A2DP) / Audio Video Remote  
Control Profile (AVRCP)  
your particular phone.  
Hands-Free Profile (HFP)  
Frequency Range: 2.4Ghz - 2.4835Ghz  
Dimensions: 55x40x10mm  
Weight: 16 grams  
Certifications: FCC  
The connection range varies on the surrounding  
environment. Range is not guaranteed to be 30  
feet in all cases. Range can be reduced by other  
competing electronic devices such as: Cordless  
Telephones, Microwaves and Typical household  
electronics. Range can also be reduced.  
Headphones drop wireless link less than 30  
feet away.  
OVERVIEW  
Check for other competing Bluetooth® or 2.4Ghz  
electronic devices in close proximity to the  
transmitter or UBHP head phones. Power down  
these competing devices.  
ILLUSTRATION 1  
ILLUSTRATION 1  
Headphones or Transmitter loses wireless for  
no reason.  
1. Volume Down; Track Backward  
2. Power On/Off & Cell phone  
3. Volume Up; Track Forward  
4. Dual Red/Blue LED Indicators  
5.Transmitter Power Button  
6. Transmitter Charge Port  
2
Check to make sure the two products successfully  
paired and both devices are powered ON.  
2) Make sure you are within range of the trans-  
mitter. 3) Make sure source volume is not muted.  
4) make sure headphone "I/O" switch is set for  
INPUT.  
No Audio heard from transmitter.  
1
LIMITED WARRANTY  
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 90 days from prurchase. This  
Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty  
is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence  
or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by  
accident or which has been miss used, disassembled or altered.  
3
The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period,  
return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and  
return the product postage paid.  
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable  
or responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use  
or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche  
Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.  
5
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:1) This device may not  
cause interference, and 2) this device must accept any interference that may be received, including interference that may  
cause undesired operation. The manufactirer is not responsible for any radio or TV interference caused by unauthorized  
modification to this equipment. Such modification could void the user's authority to operate the equipment  
6
4
If you have any further questions, call our TOLL FREE number:  
IBHPK  
TECHNICAL HELP LINE 1-800-361-3695 Ext.3  
 
6
1
2.5mm INPUT/OUTPUT WITH SWITCH  
2.5mm INPUT/OUTPUT WITH SWITCH (CONT'D)  
The UBHP Bluetooth® headphones include a unique 2.5mm stereo input/output port with switch:  
NOT TO SCALE  
ILLUSTRATION 5  
ILLUSTRATION 3  
CONNECTION  
ADAPTERS  
UBHP RIGHT  
EARPIECE  
AUX TUNER  
RCA'S  
HOME HIFI  
(BACK VIEW)  
CELLULAR  
HANDS-  
CD PHONO  
FREE MIC  
2.5mm to 3.5mm CABLE  
INPUT/OUTPUT  
SWITCH  
2.5mm INPUT  
CHARGE  
OUTPUT PART  
PORT  
IPOD  
POSITION 1 (INPUT) ILLUSTRATION 4  
In this position the 2.5mm port act as a direct audio wires input and the UBHP Headphones will operate  
as pair of high quality wired units. This is handy for air travel or anywhere wireless devices are not  
permitted.  
A) Make sure UBHP power is OFF  
SCOSCHE UBHP  
HEADPHONES  
SCOSCHE IPBTT  
B) Connect to the 2.5mm to 3.5mm adapter cable between your portable media player and the UBHP  
headphones  
TRANSMITTER TRANSMITS TO HEADPHONES  
NOT TO SCALE  
ILLUSTRATION 4  
®
®
This product may not be compatible with all Bluetooth features on all Bluetooth enabled cell phones. This may  
or may not include send/end control functions, volume adjustment and voice dialing. Please consult your  
CONNECTION  
ADAPTERS  
®
Bluetooth enabled cell phone operation manual for specific features and instructions.  
2.5mm TO  
3.5mm CABLE  
CONNECT ADAPTERS  
The UBHK set adapters for may applications:  
2.5mm Male to 3.5 male Cable  
IPOD  
This adapter allows the UBHP headphones to be connected to various device using  
a standard 3.5mm stereo output which is found on most MP3 players.  
SCOSCHE UBHP  
HEAPHONES  
3.5mm Male to .25 Hifi Headphone Male  
This adapter allows the IPBTT transmitter (or UBHP Headphones) to connect with  
home HiFi stereo receivers or device that use .25 headphone jack.  
POSITION 2 (OUTPUT): ILLUSTRATION 5  
In this position the 2.5mm port acts as a bypass or audio output. The UBHP Headphones will operate as  
Bluetooth® RECEIVER and pass the audio signal through the 2.5mm port. This is handy if you need to send  
the audio signal from the IPBTT Bluetooth® Transmitter to an outboard or external device such as a set of  
amplified mini-speakers, home stereo or laptop computer.  
CARE AND MAINTENANCE  
1. Keep devices away from heavy moisture. Sources of humidity and all types of liquids will corrode  
electronic circuits.  
2. Keep devices away from high heat. Extreme temperatures will shorten the life of electronic circuits and  
could possibly melt the plastic case. For example, do not store the unit in direct sunlight on a vehicle  
dashboard.  
A) Make sure Both the headphones and transmitter are powered and a Bluetooth® wireless connection  
has been established.  
B) Connect to the 2.5mm to 3.5mm adapter cable between the UBHP Headphones and your external  
secondary audio device.  
3. Don't attempt to open or repair these products. Non-expert handling will damage them and void any all  
possible warranty claims.  
4. Don't use harsh chemicals, cleaning solvents or detergents to clean the products.  
 
4
5

Radio Shack Microphone 33 3024 User Guide
RCA Projection Television HDTV DVD Monitor User Guide
Ryobi Trimmer 105r, 132r, 137r User Guide
Samsung Computer Monitor 193S User Guide
Samsung Home Security System SCV 2080R User Guide
SanDisk MP3 Player Clip User Guide
Schwinn Motor Scooters Mobility Aid 50CA06PK User Guide
Seagate Computer Drive NL35 Series User Guide
Sears Drill 11324611 User Guide
Sears Sewing Machine 385128418 User Guide