motorola
PAIR
BEFOREYOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
CHARGE
START BLUETOOTH
®
3
1
2
Bluetooth
Your Headset
Your Headset's Battery
FEATURE
Handsfree Headset
Your Phone
Take a moment before you get started to
familiarize yourself with your new
H670 Headset.
Before you can use your headset, you must pair
(link) it with your phone.
Your phone's Bluetooiefault.
To use youse, you must tu
h feature in your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
For most Motorola phones (at the u):
Call Button/
Charging
Menu) > Settings > Conn
1
Slide Switch
Power on headset by sliding the Call button
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
Multi-Color
Indicator Light
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Plug thinto the end of
the h
1
2
3
4
5
Volume
Buttons
The he
bamay ta
mr the indicator light to urn on.
he headset's battery is fully charged
2 hours), the indicator light turns off.
Indicator Light
(steadily blue
for pairing mode)
Micr
Press Select to turn on the Bluetooth
feature.The Bluetooth feature remains on
until you turn the feature off.
Disconnect the charger.
er
erse
side)
Note: Headset is not functional while charging.
H670
Get con
If the headset does not eg mode,
see TROUBLG for help.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBOOTING
Motorola, Inc.
USING YOU70
PAIR CONTINUED
TEST AND USE
3
4
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
My headset will pairing mode.
Make sure that any previously paired
with the headset aroff. If the indicator
light is not steadily lblue, turn off both the
other device and headset, wait 10 seconds,
then turn headset back on. Wait for the indicator
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
Your Phone
See
Features a
Step B - SETYOUR PHONETO LOOK FOR
YOUR HEADSET
Your phone and headset are now paired
ready to make and receive calls.
To make
Functions Gu
on the reverse
r information
g your H67
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
For most Motorola phones:
your ear.
M
On your Motorola phone, press
(Men
1
Settings > Connection > Bluetooth Link >
Hands
l the number you
ss on your
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
Guide Number: 6809504A20-A
inds.
your phone and re successfully
ired, you will hearinging on the headset.
2
3
My headset worked before but now it's not
working.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
dset with
MOTOROLA and the Stylized M Logo are registered in the US
Patent &Trademark Office.The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products.The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
4
5
E00
Note: If desired, your headset can be restored to original
factory settings.This action will erase all pairing information
stored in your headset.Thus, you will need to pair your
phone and headset again (see step 3).
SOK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue.
To save battery power, turn OFF the
headset when you don't use it for an
extended time by sliding the switch
towards the charging plug.
Support.
To restore your headset to original factory settings, press
and hold both Volume buttons and the Call button at the
same time for 10 seconds.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
Note:These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
© Motorola, Inc. 2006.
|