Biker
BLUETOOTH® MOTORCYCLE HEADSET
MR HANDSFREE / BLUE BIKER / 03-2012 / V01
GB NL FR DK CZ SK
E
I
Package Content
GB
Mounting parts
Chargers
Allen wrench
Blue Biker
Product Description
The Mr Handsfree Blue Biker is a Bluetooth® stereo headset for motorcyclists. Before using
it, we do recommend you to read this manual first.
2
3
1
1. MFB button (Multi-functional Button)
ꢀ. Volume + ( Volume up / Track forward /
Voice dialing )
3. CTRL (Control) Button ( Power / Pairing )
4. LED light indicator
5. Volume – ( Volume down / Track back /
Last number redial )
6. Micro USB port
6
5
4
Specifications
Bluetooth® Version
Bluetooth® RF Spec
Talk Time
Bluetooth® V2.1+EDR
Class 1
8 hours
Standby Time
400 hours
Charging Voltage
Charging Time
RF Frequency
5V
3 hours
2.4 ~ 2.4835 GHz (ISM Band)
Baꢀery Type
550mAh rechargeable Lithium-Polymer Baꢀery
Supports HSP, HFP, A2DP, AVRCP and Full Duplex communicaꢁon
- ꢀ -
Main Features
GB
Mobile phone functions
►
►
►
►
►
►
Bluetooth® handsfree calling
Voice dialing
Last number redial
Reject a call
Independent Mobile phone volume control
Mobile phone function has the highest priority
Stereo functions
►
►
►
►
►
Bluetooth® A2DP music play
Enjoy music from Mobile phone or other music sources
Remote control music with AVRCP
Independent music volume control
Mobile phone function has the highest priority
► DSP technique, noise suppression and echo cancellation to optimize audio quality.
► AGC (Automatic Gain Control): In addition to manual volume control, the Blue Biker
system will automatically increase and reduce its volume according to ambient noise and
driving speed.
Installation
1. Mounting the Clip
The headset clip must be mounted onto the helmet. Once mounted, the headset unit can be
attached or detached from the headset clip at any time. It can even be removed for charging
and storage purposes.
Note: We recommend to remove the headset from the helmet when not in use.
- 3 -
ꢀ. Mounting the microphone and speakers
GB
2.1 The microphone must be positioned in front of the center
of the mouth.
2.2 Attach the speakers to the Velcro inside your helmet
opposite your ears (short speaker cord for left ear & long
speaker cord for right ear), or use the supplied Velcro pads.
2.3 For some countries’ traffic regulations, only one speaker
is permitted to install in the helmet. In this case, the right
side speaker can be detached.
Note: Always prioritize safety! Make sure to stay focused on the road during a mobile phone
conversation. In bad weather and/or heavy traffic, we recommend pulling over and stopping,
before answering the call.
Operation
Power On and Off
1. In power off mode: press CTRL button and hold it for 3 seconds until you hear a “di” tone.
Release the button: the blue indicator will flash to indicate the Blue Biker is switched ON.
2. In power on mode: press CTRL button and hold it for 5 seconds until you hear a long “di”
tone. The LED indicators will turn out to indicate the Blue Biker is switched off.
Pairing
Make sure that the Blue Biker is turned off (LED indicator = off). => Make sure that the
Bluetooth® function of your mobile phone is turned ON and let your phone search for
Bluetooth®devices. => Press and hold the CTRL button of the Blue Biker until the LED
indicator starts flashing by blue and red colors alternately. => Your mobile phone, which
is still in search mode, will show the Blue Biker in the list of found Bluetooth® devices. =>
Select the Blue Biker in your mobile phone and enter the PIN code 0000 to pair both devices.
You will hear a long beep. =>The blue LED indicator (5) will start flashing and you will hear
a “di” tone.
Now you can use the headset to make handsfree calls (A) and enjoy the music (B) stored on
your mobile phone.
- 4 -
A. Mobile phone operation
GB
1. Answer incoming call
When you receive an incoming phone call, shortly press the MFB button to answer the call.
2. Reject a call
When you receive an incoming phone call, press and hold the MFB button for 2 seconds
until you hear a “du” tone and the incoming call is rejected.
3. End a conversation
Press the MFB button to end the conversation.
4. Last number redial
Press the Volume - button twice, the mobile phone will dial the latest called number.
5. Voice Dial
Press the Volume + twice and you will hear a tone that indicates that you can say the
desired name (“voice tag”). => Say the voice tag. =>The phone plays the voice tag and
dials the related phone number.
Attention!
The voice dialing function is only available if it is supported by your mobile phone!
6. Volume control
Press the Volume + / Volume – to adjust the volume.
7. Transfer a call to the mobile phone
Press the MFB button twice, you will hear a tone indicating the call was transferred to
your mobile phone.
B. Music operation
1. Play / Pause
Shortly press the MFB button to play or pause the music.
2. Track forward
Press the Volume + button to skip to the next track.
3. Track backward
Press the Volume - button to skip to the previous track.
(Note: your Bluetooth® music device needs to support A2DP and AVRCP)
4. Volume control
Press the Volume + / Volume – to adjust the volume. When reaching the maximum/
minimum volume, a “DiDong” tone will be played.
Note: the mobile phone function always has the highest priority. An incoming mobile phone
call will automatically mute the music. The music will be restored automatically after the call
has ended.
- 5 -
Trouble shooting
GB
1. The headset is not working
Please check the battery: it could be low, please charge it for 3 hours.
ꢀ. There is no sound coming out of the headset
Please check whether the speakers and microphone were connected right. Also check
the volume: maybe you have set it too low?
3. Whistling of the speakers
If the microphone is too close to the speaker, the speaker could produce a ‘whistling’
sound. Enlarge the distance between the microphone and the speaker and the problem
should be solved.
4. Lose connection with the mobile phone or music device
Please check the battery: if it is too low, the Blue Biker could lose the connection with
the mobile phone.
5. Cannot reconnect with your mobile phone
Please consult the list of previously paired devices on your mobile phone: remove all
the names on the list, then turn off the headset, and remove your mobile phone’s battery
for a few seconds. Replace the battery, turn on your mobile phone and let your phone
search for Bluetooth® devices again. Now you can reconnect with the Blue Biker.
Charging the battery
Please charge the helmet headset for 3 hours until the red LED indicator turns off before use.
Note:
1. Please use the USB cables gently, do not pull too hard or the helmet headset may be damaged.
2. In order to optimize the battery capacity, please stock the headset in 15°C to 25°C environment
while not in use.
LED light Indicator
LED Indicator type
Mode
All LED Indicators off
Power off
Red/Blue LED flash alternately
Blue LED flashes shortly every 3 seconds
Blue LED flashes long every 3 seconds
Red LED flashes every 3 seconds
Red LED lights continuously
Pairing mode
Standby state
Connected
Battery is low
Headset is being charged
Note: The red LED will turn off to indicate charging completed.
- 6 -
GUARANTEE
GB
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV. The mr Handsfree brand stands
for superior product quality and outstanding customer service. That is why mr Handsfree
warrants this product against all defects in material and workmanship for a period of two (2)
years from the date of original purchase of the product. The conditions of this guarantee and
the extent of responsibility of mr Handsfree under this guarantee can be downloaded from
NL
GARANTIE
Mr Handsfree is een gedeponeerd handelsmerk van TE-Group NV. Het merk mr Handsfree
staat voor producten van superieure kwaliteit en een uitstekende klantenservice. Daarom
garandeert mr Handsfree dat dit product vrij is van materiaal- en fabricagefouten gedurende
een periode van twee (2) jaar na de oorspronkelijke aankoopdatum van het product. De voor-
waarden van deze garantie en de omvang van de verantwoordelijkheid van mr Handsfree
FR
GARANTIE
Mr Handsfree est une marque déposée de TE-Group NV. La marque de mr Handsfree est
synonyme de produits de qualité supérieure et d’un service après-vente excellent. C’est la
raison pour laquelle mr Handsfree garantit ce produit contre tout défaut de matériel ou de
fabrication pour une période de deux (2) ans à compter de la date d’achat initiale. Les condi-
tions de cette garantie et l’étendue de la responsabilité de mr Handsfree en vertu de cette
DK
GARANTI
Mr Handsfree er et registreret varemærke tilhørende TE-Group NV. Mr Handsfree brand står
for overlegen produktkvalitet og fremragende kundeservice. Derfor er Mr. Handsfree garan-
terer, at dette produkt mod alle defekter i materiale og udførelse i en periode på to (2) år fra
datoen for det oprindelige køb af produktet. Betingelserne for denne garanti, og omfanget
af ansvaret for mr. Handsfree i henhold til denne garanti kan downloades fra vores hjemme-
- 42 -
CZ
ZÁRUKA
Mr Handsfree je registrovaná obchodná známka TE-Group NV.
Značka mr Handsfree představuje vynikající kvalitu výrobků a vynikající služby zákazníkům.
To je důvod, proč mr Handsfree poskytuje záruku na tento produkt, na všecky chyby ma-
teriálu a zpracování, 2 roky od data původního nákupu tohoto produktu.
Podmínky této záruky a rozsah zodpovědnosti mr Handsfree v rámci této záruky je možné
SK
ZÁRUKA
Mr Handsfree je registrovaná obchodná známka TE-Group NV.
Značka mr Handsfree predstavuje vynikajúcej kvality výrobkov a vynikajúce služby záka-
zníkom. To je dôvod prečo mr Handsfree poskytuje záruku na tento produkt na všetky chyby
materiálu a spracovanie na 2 roky od dátumu pôvodného nákupu tohto produktu.
Podmienky tejto záruky a rozsahu zodpovednosti mr Handsfree v rámci tejto záruky je možné
E
GARANTÍA
Mr Handsfree es una marca registrada de TE-Group NV. La marca mr Handsfree representa
una calidad de producto superior y una excelente atención al cliente. Por esto es por lo que
mr Handsfree garantiza este producto contra todos los defectos materiales y de mano de
obra durante un periodo de dos (2) años a partir de la fecha de compra original del producto.
Las condiciones de esta garantía y el alcance de la responsabilidad de mr Handsfree bajo
I
GARANTÍA
Mr Handsfree es una marca registrada de TE-Group NV. La marca mr Handsfree representa
una calidad de producto superior y una excelente atención al cliente. Por esto es por lo que
mr Handsfree garantiza este producto contra todos los defectos materiales y de mano de
obra durante un periodo de dos (2) años a partir de la fecha de compra original del producto.
Las condiciones de esta garantía y el alcance de la responsabilidad de mr Handsfree bajo
- 43 -
|