Contents
Preface .........................................................................................2
Installation....................................................................................4
Unpacking............................................................................................................................................................................... 4
Adjust height and angle of Tilt stand........................................................................................................................... 5
Connecting the Display ..................................................................................................................................................... 5
Connecting the AC Power ................................................................................................................................................ 6
Connecting the USB Hub .................................................................................................................................................. 6
Setting Up the LCD Monitor............................................................................................................................................. 6
Power Management System............................................................................................................................................ 6
Display Controls ............................................................................7
User Controls ......................................................................................................................................................................... 7
Adjusting the Monitor's Display..................................................................................................................................... 8
Function Description .......................................................................................................................................................... 9
OSD Lock Out Function ...................................................................................................................................................13
Technical Information..................................................................14
Specifications.......................................................................................................................................................................14
Troubleshooting...........................................................................18
Product Registration and Technical Support .................................19
1
Preface
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to
change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the
manufacturer. Windows is a registered trademark of Microsoft Inc. Other brand or product names are trademarks of their respective
holders.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reposition or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced monitor technician for help.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
This device complies with part 15FCC Rules. Operation is subject to the following two conditions(1) This device may
not cause harmful interference. (2) This device must accept any interference received, including interference that may
cause undesired operation.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
2
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean the LCD Monitor screen:
-- Power off the LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed
by an authorized technician.
5. Store the LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD Monitor
outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
*
*
*
Monitor to PC signal cable is frayed or damaged.
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
LCD Monitor or the case is damaged.
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight
above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.
Important Recycle Instruction:
Lamp(s) inside this product contain mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check
WWW.LAMPRECYCLE.ORG.
Contains Mercury, Dispose of Properly
3
Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable
and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient
airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does
not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
*
*
*
LCD Monitor
*
*
User's Guide
*
*
Base
Monitor-to-PC VGA Cable
Monitor-to-PC "Up to Down" USB cable
Monitor-to-PC DVI-D Cable
DVI-HDMI cable(optional)
Power Cord
*
If you find that any of these items is missing or appears damaged, contact your dealer immediately.
4
40o
Adjust height and angle of Tilt stand
The monitor screen may be raised or lowered and tilted (-5 to 40 degree).
To raise or lower the monitor screen, place hands on each side of the
monitor screen and lift or lower to the desired height as shown in the
right figure.
5o
170o
170o
Figure 1-1
CAUTION:
* When lowering the monitor screen avoid catching your hand and
fingers between the monitor screen and the tilt stand base.
40o
-5o
-5o
*The monitor screen can be tilted back to over 180 degree for packing.
When operating the monitor, do not tilt pass 40 degrees to prevent the
monitor from falling backward or being damaged due to increased
temperature within the monitor.
40o
*Before tilting the screen back to 180 degree for packing, lower the
screen down to the lowest position to prevent the monitor from falling
over and being damaged.
60mm
*Do not push the surface of the monitor screen strongly and do not
scratch it with your nails when you adjust the position of the monitor
screen. Otherwise you might be injured or the display could be
damaged.
Figure 1-2
Note: When you tilt the monitor pass 40 degrees, you will hear clicking noise. Tilting pass 40 degrees becomes harder than tilting within
40 degrees..
Connecting the Display
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s
VGA port or DVI-D port or DVI-I port. (See Fig 1-3)
3. Connect the other end of the signal cable to the VGA port or
DVI-D port on your PC and DVD or Notebook HDMI port.
4. Make sure connections are secure.
Figure 1-3
5
Connecting the AC Power
1. Connect the power cord to the LCD Monitor.(See Fig. 1-4)
2. Connect the power cord to an AC power source.
3. Turn the AC power switch to On.
AC Power switch
AC Power Jack
Power Cord
Figure 1-4
Connecting the USB Hub
1. Connect the “A“ end of the USB cable to your computer.
2. Connect the “B “end of the USB cable to the USB hub on the
monitor.
3. Connect USB compliant products directly to the USB hub on
the monitor. ( See Fig 1-5)
Figure 1-5
Setting Up the LCD Monitor
1. Make sure the AC power cord is connected to the LCD Monitor.
2. Press the power button located on the bezel of the monitor.
3. Once a signal is received, the monitor should automatically adjust. If not, push the “AUTO” button located on
the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™ compliance
display card or software installed in your PC, the monitor can automatically reduce its power consumption when not
in use. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will
automatically "wake up". When the LCD Monitor is in power saving mode, the monitor screen will be blank and the
power LED indicator will light yellow.
6
Display Controls
User Controls
A brief description and the location of all LCD Monitor functions controls and indicators
Figure 2-1
Push to turn ON or turn Off.
1
Activates OSD main menu.
MENU
EXIT
2
3
4
5
6
Exit OSD display / DV mode hot key.
Select DVI or D-SUB signal source. (Toggle Switch)
SOURCE
AUTO
LED
Hot key for manually auto adjusting the display.
Green when the monitor is on, Amber when in power saving mode, and Dark when off.
A four direction key plus enter/exit button. Allows you to move up, down, left, right or
pressed. See function chart below.
4D+1
7
4D+1 Key Function Definition
Push key up~
Hot Key: Contrast +
Menu : Cursor Up
Push key left~
Hot Key: Brightness -
Menu: Cursor Left
/ Volume -
Push key right~
Hot Key: Brightness +
Menu: Cursor right
/ Volume +
Press key center~
Item Enter / Exit
Push key down~
Hot Key: Contrast -
Menu: Cursor Down
7
Adjusting the Monitor's Display
The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy
user-viewing environments.
OSD Function Menu
To activate the OSD Main menu, simply press ”Menu” button , the menu diagram will pop up on the screen as
shown on Fig. 2-2
Use the 4D+1 key to navigate through the function you want to adjust. Push the 4D+1 key to enter a sub-menu
and adjust the value. Push the 4D+1 key again to exit the sub-menu. Pressing the "Exit" buttons allows you to
exit the OSD menu at any time. Pressing the "Menu" key gets you back to the main menu.
Figure 2-2
Menu under input
Attention
Firmware revision may have been updated into a latest version while the version number shown on information item
in OSD menu will stay as Ver 1
Information OSD
Figure 2-3
8
Function Description
Figure
Function
Function Description
The following DV mode display setting can be selected
by OSD
(STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO)
Default setting: TEXT
DV MODE
Adjust the brightness.
Factory setting: 100.0%
BRIGHTNESS
Adjust the image contrast.
Factory setting:50.0%
Adjust the sharpness.
Factory setting: 50%
CONTRAST
SHARPNESS
AUTO
CONTRAST
(D-SUB or DVI-I
Analog signal
Only)
Adjust the CONTRAST to the optimal value for the
video-input level automatically.
AUTO ADJUST
(D-SUB or DVI-I Adjust the H.POSITION, V.POSITION, H-SIZE and FINE to
Analog Input the optimal value automatically.
Only)
This function allows you to choose from different
display modes:
Full: expands all resolution to full screen.
EXPANSION
MODE
Aspect: enlarges native resolution to either horizontal
or vertical limit.
Real: displays native resolution.
Default setting: FULL
LEFT/RIGHT
(D-SUB or DVI-I
Analog Input
Only)
Adjust the horizontal image position.
DOWN/UP
(D-SUB or DVI-I
Analog Input
Only)
Adjust the vertical image position.
CLOCK
(D-SUB or DVI-I
Analog Input
Only)
Adjust the sync frequency of internal pixel clock.
PHASE
(D-SUB or DVI-I
Analog Input
Only)
Adjust the value for improve display focus.
9
Choose different color temperature
(9300K, 7500K, sRGB, USER).
Default is USER.
Color
Temperature
USER mode adjustable.
Adjust the contrast and brightness of each color of the
white balance.
RED
GREEN
BLUE
GAIN
Allows you to adjust the Red/Green/Blue color gain.
RED
GREEN
BLUE
Allows you to adjust the Red/Green/Blue color offset.
OFFSET
Adjust color depth, increasing this value makes pictures
more colorful, decreasing makes pictures less colorful.
Adjustable value from -100 to 100.
SATURATION
DDC/CI
Factory setting: 0
DDC/CI allows you to control certain settings of the
monitor via computer.
Default is ON.
When "Full" is not selected in the "Expansion Mode"
and the resolution is under the LCD panel's native
resolution, the picture does not display at full screen.
The borders/sides around the picture can be
SIDE COLOR
RECALL
customized.
Adjust "Side Color" to customize the color of the
border/sides around the picture.
Reset all user settings to factory preset value except
language selection.
LANGUAGE Select a language for OSD menu.
OSD
Control the location of the OSD menu on the screen.
Factory setting: Center of the screen.
LEFT/RIGHT
OSD UP/DOWN
Select OSD Menu turn off time.
Factory setting: 45 seconds.
OSD TURN OFF
RESOLUTION Resolution notifier activity.
NOTIFIER Factory setting: OFF
10
Provide information about resolution, H/V frequencies,
and polarity of the input signal.
Information
This OSD informs the user the current signal that is
displayed.
Input Select
This OSD will automatically turn off after 2 seconds or
by pressing the “Exit” key.
This OSD gives a warning when the selected input
signal is not active. After power on or when the input
signal become inactive, this warning appears.
No signal OSD shall be shown after around 0.5sec from
video mode detection. This OSD shall be turned off
after 5 seconds automatically, or by “EXIT” key. Then
change to power saving mode. If direction key is
pressed during power saving mode, this warning OSD
is opened again.
OSD Warnings
NO SIGNAL
11
This function gives warning about input resolution or
refresh rate that the monitor cannot display.
If video signal is not at the proper timing when the
monitor powers on or input signal is changed, this
message opens and it disappears after 45 seconds, or
by "EXIT" key.
OSD Warnings
OUT OF RANGE
When the monitor is displayed for the first time and the
resolution is 800x600 and above, the monitor will auto
adjust itself.
To manually execute the Auto Adjust function, press
the Auto button.
Auto Adjust
(Analog Input
Only)
Target color coordinates
Color Temp.
9300K
7500K
0.194
0.459
0.299
0.315
sRGB
0.198
0.468
0.313
0.329
u’
v’
x
0.189
0.446
0.283
0.297
y
12
OSD Lock Out Function
OSD Lock Function allows you to lock out the OSD menu and the button keys.
To activates the OSD lock function, the monitor must be in a normal display mode and the information menu as
shown in fig-2-4 must be activated. Then follow the instructions below.
Figure 2-4
Option 1: OSD lock – all buttons be locked except the “POWER” button.
Press “Exit Key + Menu Key + Soft power key” at same time
The monitor will show an “OSD Lock Out” message, showing time as “OSD TURN OFF” setting, and the message be
show again by any button, also any button exit this message, but “Power” button be turn off / on monitor.
Only repeat this step to unlock.
Option 2: OSD & Power button lock – all buttons including “POWER” button be locked.
Press “Exit Key + Menu Key + Up key” at same time
The monitor will show an “OSD Lock Out” message, showing time as “OSD TURN OFF” setting, and the message be
show again by any button, also any button exit this message, but “Power” button no action.
Only repeat this step to unlock.
13
Technical Information
Specifications
LCD Panel
Size
26"
Display Type
Resolution
Active matrix color TFT LCD
1920 x 1200
Display Dot
Display Area (mm)
Display Color
1920 x (RGB) x 1200
550.08 x 343.8 (H x V)
16.7M (RGB 8 bit)
Video
Input Signal
Input Impedance
Polarity
Analogue RGB ; Digital TMDS
75 Ohm 2% (VGA)
Positive, Negative (VGA)
Amplitude
0 - 0.7 0.05 Vp (VGA)
Multi-mode Supported
Horizontal Frequency: 31 ~ 93.75kHz
Vertical Frequency: 50 ~ 76 Hz
Control
Power switch
On/Off switch with LED indicator
OSD
Brightness
Digital
Contrast
Digital
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Clock
Digital
Display Mode Setup
Use EEPROM to save settings in memory
Others
USB Hub ( optional )
Upstream
USB 2.0 Self Powered
1 ( Link to PC )
Downstream
4 ( Link to Device)
14
Power Management
Mode
Power Consumption*
135W maximum
2W maximum
AC Input
240 VAC
240 VAC
240 VAC
240 VAC
LED Color
Green
Amber
Dark
DPM ON
DPM OFF
DC switch off
Disconnected
1W maximum
2W maximum
Dark
Meeting VESA DPM requirements measured from AC Input end of AC power cord.
Sync Input
Signal
Analogue
Separate TTL compatible horizontal and vertical
synchronization
Polarity
Positive and negative
Supports VESA DDC2B functions
Plug & Play
External Connection
Power Input (AC input)
Video Cable
AC socket
15-pin D-sub connector
Environment
Operating Condition:
Temperature
Relative
5°C to 40°C/41°F to 104°F
20% to 80%
Humidity
Temperature
Storage Condition:
-20°C to 60° C/-4°F to140° F
5% to 85%
Relative
Humidity
Power Supply (AC Input)
Input Voltage
Input Current
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.5 A maximum
Size and Weight
Dimensions
Net Weight
594 (W) x 456.9 (H) x 273.5 (D) mm
11.2 ± 0.3 kg
Gross Weight
13.4 ± 0.3 kg
15
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
FH (KHz)
FV (Hz)
SYNC
TOTAL
ACTIVE
SYNC
WIDTH
FRONT
PORCH
BACK
PORCH
PIXEL
FOREQ.(MHz)
POLARITY (DOT / LINE) (DOT / LINE)
TIMING NAME
640x350
(DOT / LINE) (DOT / LINE) (DOT / LINE)
31.469
70.087
31.469
70.087
31.469
59.94
35
+
–
800
449
640
350
640
400
640
480
640
480
640
480
640
480
720
400
720
400
832
624
800
600
800
600
800
600
800
600
848
480
1024
768
1024
768
1024
768
1024
768
1024
768
1152
864
1152
864
1152
864
1152
96
2
16
37
16
12
16
10
64
3
48
60
25.175
25.175
25.175
30.24
31.5
VGA-350
640x400
–
800
96
2
48
VGA-GRAPH
640x480
+
–
449
35
800
96
2
48
VGA-480
–
525
33
640x480
–
864
64
3
96
APPLE MAC-480
640x480
66.67
37.861
72.809
37.5
–
525
39
–
832
40
3
16
1
120
20
VESA-480-72Hz
640x480
–
520
–
840
64
3
16
1
120
16
31.5
VESA-480-75Hz
720x350
75
–
500
31.47
70.087
31.469
70.087
49.725
74.55
35.156
56.25
37.879
60.317
48.077
72.188
46.875
75
+
–
900
108
2
18
37
18
12
32
1
54
28.322
28.322
57.2832
36
70Hz
449
60
720x400
–
900
108
2
54
VGA-400-TEXT
832x624
+
–
449
35
1152
667
64
3
224
39
APPLE MAC-800
800x600
–
+
+
+
+
+
+
+
+
+
+
–
1024
625
72
2
24
1
128
22
SVGA
800x600
1056
628
128
4
40
1
88
40
VESA-600-60Hz
800x600
23
1040
666
120
6
56
37
16
1
64
50
VESA-600-72Hz
800x600
23
1056
625
80
3
160
21
49.5
VESA-600-75Hz
848x480
31.02
60
1088
517
64
3
32
1
152
27
56.25
65
VESA
1024x768
XGA
48.363
60.004
53.964
66.132
56.476
70.069
60.023
75.029
60.24
75.02
54.054
59.27
63.851
70.012
67.5
1344
806
136
6
24
3
160
29
–
1024x768
COMPAQ-XGA
1024x768
VESA-768-70Hz
1024x768
VESA-768-75Hz
1024x768
APPLE MAC-768
1152x864
(60Hz)
+
+
–
1328
816
176
4
16
8
112
36
71.664
75
1328
806
136
6
24
3
144
29
–
+
+
–
1312
800
96
3
16
1
176
28
78.75
80
1328
803
96
3
32
3
176
29
–
+
+
+
+
+
+
–
1480
912
96
3
40
13
32
1
192
32
80
1152x864
(70Hz)
1480
912
96
3
200
44
94.499
1152x864
(75Hz)
1600
900
128
2
64
2
256
32
108
100
75
1152x870
68.68
1456
128
32
144
16
(75Hz)
75.06
44.772
59.855
60
–
–
915
1664
748
870
1280
720
3
128
5
3
64
3
39
192
20
1280x720
(60Hz)
74.5
108
+
+
+
+
+
+
+
+
+
+
+
+
+
+
–
1280x960
(60Hz)
1800
1000
1800
1000
1800
1000
1688
1066
1688
1066
1792
795
1280
960
112
3
96
1
312
36
60
1280x960
(70Hz)
70
1280
960
112
3
96
1
312
36
126
70
1280x960
(75Hz)
75
1280
960
112
3
96
1
312
36
135
75
1280x1024
VESA-1024-60Hz
1280x1024
VESA-1024-75Hz
1360x768
60Hz
64
1280
1024
1280
1024
1360
768
112
3
48
1
248
38
108
60
80
144
3
16
1
248
38
135
75
75
112
6
64
3
256
18
85.5
88.75
106.5
136.75
119
75
1440x900
Red. BLKing 60Hz
1440x900
60Hz
55.469
59.901
55.935
59.887
70.635
74.984
64.674
59.883
65.29
59.954
82.306
74.892
75
1600
926
1440
900
32
6
48
3
80
17
–
1904
934
1440
900
152
6
80
3
232
25
+
–
1440x900
75Hz
1936
942
1440
900
152
6
96
3
248
33
+
+
–
1680x1050
Red. BLKing 60Hz
1680x1050
60Hz
1840
1080
2240
1089
2272
1099
2160
1250
2160
1250
2160
1250
2080
1235
2592
1245
1680
1050
1680
1050
1680
1050
1600
1200
1600
1200
1600
1200
1920
1200
1920
1200
32
6
48
3
80
21
–
176
6
104
3
280
30
146.25
187
+
–
1680x1050
75Hz
176
6
120
3
296
40
+
+
+
+
+
+
+
+
–
1600x1200
VESA-1200-60Hz
1600x1200
VESA-1200-70Hz
1600x1200
VESA-1200-75Hz
1920x1200
Red. BLKing 60Hz
1920x1200
60Hz
192
3
64
1
304
46
162
60
87.5
192
3
64
1
304
46
189
70
93.75
75
192
3
64
1
304
46
202.5
154
74.038
59.95
74.566
59.885
32
6
48
3
80
26
–
200
6
136
3
336
36
193.25
+
*** DVI signal can not support 1680X1050@75, 1600X1200@70, 1600X1200@75, 1920X1200@60 non reduce mode
Note: Mode 640x350, 640x400 and 720x400 is centered in the middle of the display and cannot be expanded to full
screen.
17
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA
cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card
is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps:
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running
on the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment Control
button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with
a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the
LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the
VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 31 ~ 93.75
kHz and Vertical: 50 ~ 76 Hz), the OSD will display a “Out of Range” message. Choose a mode that is supported by your
LCD Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message
“No Input Signal”.
18
Product Registration and Technical Support
Register Your Planar Products Today
Thank you choosing Planar. To assure you receive all the benefits of your Planar product
and services, register your Planar product today.
Visit our website to register your product at
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,
Technical Support
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting.
To speak with Planar Customer Support please have you model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
19
|